
Sentinel
YousefAliAicha/sentinel-arduino-firmware
Adaptive traffic-light FSM on the Arduino UNO R3 — pedestrian preemption, LDR-gated night mode with HC-SR04 vehicle detection, and a multiplexed 7-segment countdown. Fully non-blocking.

Demo is an open-source printed circuit board by ram-kumar-shrestha, from the ram-kumar-shrestha/minor-project repository on GitHub. It is a 2-layer board with 31 parts on 55 nets, routed with 305 tracks and 30 vias.
It is built around the ARDUINO UNO R3 and BC547. Its parts include 12 connectors, 6 resistors, 4 diodes, 4 transistors and 4 switches. It belongs with the AVR (ATmega, ATtiny) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | R | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R2, R3, R4, R5, R6 |
| 4 | BC547 | Package_TO_SOT_THT:TO-92L_Wide | Q1, Q2, Q3, Q4 |
| 4 | D | Diode_THT:D_5KP_P10.16mm_Horizontal | D1, D2, D3, D4 |
| 4 | Screw_Terminal_01x03 | TerminalBlock:TerminalBlock_bornier-3_P5.08mm | J4, J5, J7, J8 |
| 1 | Arduino_UNO_R3 | Module:Arduino_UNO_R3 | A1 |
| 1 | Conn_01x02_Female | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J12 |
| 1 | DHT | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | FAN_RELAY | Relay_THT:Relay_SPDT_SANYOU_SRD_Series_Form_C | K4 |
| 1 | GAS | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | Jack-DC | Connector_BarrelJack:BarrelJack_Horizontal | J9 |
| 1 | LDR | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J6 |
| 1 | LIGHT_RELAY | Relay_THT:Relay_SPDT_SANYOU_SRD_Series_Form_C | K2 |
| 1 | PELTIER_RELAY | Relay_THT:Relay_SPDT_SANYOU_SRD_Series_Form_C | K3 |
| 1 | PUMP_RELAY | Relay_THT:Relay_SPDT_SANYOU_SRD_Series_Form_C | K1 |
| 1 | SOIL | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | esp1*4 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J10 |
| 1 | esp2*4 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J11 |

YousefAliAicha/sentinel-arduino-firmware
Adaptive traffic-light FSM on the Arduino UNO R3 — pedestrian preemption, LDR-gated night mode with HC-SR04 vehicle detection, and a multiplexed 7-segment countdown. Fully non-blocking.

Sharan21-cmd/climate-control-pcb-design
A compact and efficient Climate Control PCB designed for monitoring and regulating temperature and humidity using embedded electronics.
Divyansh12-86/semiconductor-parameter-daq-bench
An Arduino UNO R4-based automated I–V curve tracer for semiconductor characterization. Uses programmable gate and drain drive, an ADS1115 ADC, and switched 10 Ω/1 kΩ current-sensing ranges to measure MOSFET…

GCA-ROBOTICA/Simulador-ECU-Tablero
El sistema permite interoperar con un tablero diseñado originalmente para señales analógicas y discretas, emulando una arquitectura moderna basada en CAN Bus, similar a la utilizada en vehículos actuales.

karthikkrishnaa/Internship1_PCB_files
Internship1_PCB_files(Kakunje software private limited) the repo consists of the pcb design files.

meghashreejpbhat-hue/PCB-Design-KiCad
A collection of PCB design mini-projects completed using KiCad as part of my Value Added Course on PCB Design.

nurbano/opentribhw
Este proyecto presenta una plataforma abierta y de bajo costo para la instrumentación, medición y control en ensayos tribológicos de tipo Pin-on-Disk y Block-on-Ring.

31 parts, built around the ARDUINO UNO R3 and BC547. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ram-kumar-shrestha/minor-project repository on GitHub, at the commit this page was made from: the board is demo.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask ram-kumar-shrestha before reusing the design.