

Lu Testing
All the vegapod material
- Size
- 179.5 × 87.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 146
- Nets
- 113
- Pads
- 446
- Tracks, vias
- 969, 92
- Pours
- 15
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 27 Dec 2023
- Updated
- 11 Jan 2026
Overview
Lu Testing is an open-source printed circuit board by sakshamgupta2004, from the sakshamgupta2004/VegapodAll repository on GitHub. It is a 2-layer board of 179.5 × 87.4 mm with 146 parts on 113 nets, routed with 969 tracks and 92 vias.
It is built around the STM32G474RET6, B0505S-1WR3 and ADUM4195-1BRIZ, with the IR2110L4, LM324 and AMS1117-3.3 among its other parts. Its parts include 57 capacitors, 50 resistors, 15 ICs, 8 diodes and 6 connectors. It belongs with the STM32 boards of this library.
Main components
8STM32G474RET6
LQFP-64(10x10)-40℃~+85℃ 1.71V~3.6V 128KB 12bit 12bit 170MHz 32 Bit 512KB 52 ARM Cortex-M4F Built-in FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)B0505S-1WR3
SIP,11.7x6mm-40℃~+105℃ 1 1.5kV 10.2mm 11.68mm 1W 200kHz~340kHz 200mA 2400uF 30mVp-p 4.5V~5.5V 5V 6mA 6mm 86% Short Circuit Protection 塑封型 非稳压型 SIP,11.7x6mm Isolated Power Modules ROHSEVISUNIsolated Power ModulesADUM4195-1BRIZ
SOIC-8WSOIC-8W Isolation Amplifiers ROHSAnalog DevicesIsolation AmplifiersIR2110L4
DIP-14DIP-14 Gate DriversInfineon TechnologiesGate DriversLM324
SOP-14-1.5V~10V 0℃~+70℃ 24V 250nA 3V~20V 4 40mA 50nA 700uA 7mV 80dB SOP-14 Operational Amplifier ROHSHXY MOSFETOperational AmplifierAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsMUR460
DO-201AD-55℃~+150℃ 1.7V@4A 4A 50ns 5uA@600V 600V DO-201AD Fast Recovery / High Efficiency Diodes ROHSMDDFast Recovery / High Efficiency DiodesUS1M
SMA-55℃~+150℃ 1 Independent 1.65V@1A 1A 1kV 30A 5uA@1kV 75ns SMA Fast Recovery / High Efficiency Diodes ROHSMDDFast Recovery / High Efficiency Diodes
README
readme.md- This is the all the vegapod work from my side
- MP4s are not uploaded for obvious reasons
- some backup folders generated by kicad and other cache is added to gitignore aswell
- If any folder appears empty when it should have content, its probably added to gitignore
- Contains Videos, Images, PCB designs, Meeting info, Documents such as fdd and itd, SPICE simulations, etc
Parts
146| Qty | Value | Footprint | References |
|---|---|---|---|
| 29 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C12, C13, C15, C16, C19, C21, C22, C26, C30, C33, C34, C35, C36, C37, C38 +13 |
| 18 | 10u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C2, C3, C5, C6, C7, C10, C14, C18, C25, C31, C46, C47, C49, C52, C55, C57 +2 |
| 15 | 470 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R28, R32, R35, R36, R37, R38, R40, R41, R42, R44, R45, R47, R48, R49, R50 |
| 10 | 0.1Ohm 3W | Resistor_SMD:R_2512_6332Metric_Pad1.40x3.35mm_HandSolder | R18, R19, R20, R21, R22, R23, R24, R25, R26, R27 |
| 6 | 22K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2, R3, R6, R7, R8 |
| 5 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R12, R17, R29, R31, R33 |
| 5 | 330uH 5.2A | Inductor_THT:L_Toroid_Vertical_L33.0mm_W17.8mm_P12.70mm_Pulse_KM-5 | L1, L2, L3, L4, L5 |
| 4 | 220 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R14, R15, R16, R34 |
| 4 | 47n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C27, C28, C29, C32 |
| 4 | 6N137 | Package_DIP:DIP-8_W7.62mm | U6, U7, U8, U10 |
| 4 | MUR460 | Diode_THT:D_DO-201AE_P15.24mm_Horizontal | D3, D5, D6, D7 |
| 3 | 10 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R10, R39 |
| 3 | 1uF 400V | Capacitor_THT:C_Rect_L24.0mm_W8.3mm_P22.50mm_MKT | C4, C11, C24 |
| 3 | Q_PMOS_GSD | Package_TO_SOT_SMD:SOT-23 | Q3, Q4, Q5 |
| 3 | US1M | Diode_SMD:D_SMA-SMB_Universal_Handsoldering | D2, D4, D8 |
| 2 | 1K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R13 |
| 2 | 6N137 | Package_SO:SSO-8_6.7x9.8mm_P2.54mm_Clearance8mm | U11, U13 |
| 2 | B0505S-1WR3 | B0505S-1WR3:B0505S_MNS | U3, U15 |
| 2 | C_Snub | Capacitor_THT:C_Rect_L24.0mm_W8.3mm_P22.50mm_MKT | C20, C23 |
| 2 | Conn_01x04_Male | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J5, J6 |
| 2 | Q_NMOS_GDS | Package_TO_SOT_THT:TO-247-3_Vertical | Q1, Q2 |
| 2 | R_Snub | Resistor_THT:R_Box_L26.0mm_W5.0mm_P20.00mm | R9, R11 |
| 1 | 17V-35V IN | Connector_Phoenix_MC_HighVoltage:PhoenixContact_MCV_1,5_2-G-5.08_1x02_P5.08mm_Vertical | J2 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R30 |
| 1 | 56uF | Capacitor_THT:CP_Radial_D16.0mm_P7.50mm | C17 |
| 1 | ADUM4195-1BRIZ | ADUM4195-1:RI-8-1_ADI | U12 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U14 |
| 1 | Conn_01x07_Male | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical_SMD_Pin1Right | J4 |
| 1 | DC Link | Connector_Phoenix_MC_HighVoltage:PhoenixContact_MCV_1,5_2-G-5.08_1x02_P5.08mm_Vertical | J1 |
| 1 | IR2110 | Package_DIP:DIP-14_W7.62mm | U4 |
| 1 | KA78M05_TO252 | Package_TO_SOT_SMD:TO-252-2 | U1 |
| 1 | LED | Diode_SMD:D_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | LM324 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U5 |
| 1 | LM7815_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U2 |
| 1 | OUT | Connector_Phoenix_MC_HighVoltage:PhoenixContact_MCV_1,5_2-G-5.08_1x02_P5.08mm_Vertical | J3 |
| 1 | Open Circuit | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R43 |
| 1 | STM32G474RET6 | STM32G4:QFP50P1200X1200X160-64N | U9 |
| 1 | Short out | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R46 |
More from sakshamgupta2004/VegapodAll
12- 4 layers250 × 126 mm

- 2 layers129.3 × 105.5 mm

- 2 layers85.1 × 85.1 mm

- 2 layers85.1 × 85.1 mm

- 2 layers283.8 × 145.4 mm

- 4 layers80.3 × 134.5 mm

- 2 layers296.5 × 199.4 mm

- 2 layers92.6 × 87.9 mm

- 2 layers122.6 × 153.7 mm

- 2 layers85.1 × 85.1 mm

- 2 layers85.1 × 85.1 mm

- 4 layers45.5 × 74 mm

Similar boards
- 4 layers154.5 × 92 mm

- 2 layers117.2 × 47.5 mm

KicadDesign
UAA-F14/PCBs-Design
Power electronics PCB coursework — SCR controller, buck converter, Class D amplifier, DC-AC inverter, and a protected power supply Resources
16 parts1 - 4 layers

LightProcessor preFreeRoute
K0iNguyen/LightProcessor
PCB code and design for Optical chemical potential mapping research at Zeng Lab, Purdue University.
131 parts - 4 layers127 × 101.6 mm

- 2 layers74 × 74 mm

Solartron 7075 interface konnect
cHemingway/llm_circuitgen_tests
Tests of various "circuit as code" tools
93 parts - 4 layers188 × 103 mm

CAN DISPLAY
VladxIL/NMEA2000_0183_Display
Display NMEA2000 and NMEA0183 on DWIN 7" Display
130 partsGPL-3.0 - 4 layers120 × 80 mm

Brain
etiennechlt/electronic-chess
Générée par tools/boardgen (module power). 100 x 60 mm, 2 couches, plan de masse en face arrière. Elle gère trois cellules plates 1S 5 Ah.
113 parts - 2 layers100 × 70 mm

MotorDriver
JeyRunner/actonator
3D printable robot actuator with belt-driven gearbox and custom FOC driver board.
177 parts10MIT
Questions
How big is the Lu Testing PCB?
It measures 179.5 × 87.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Lu Testing use?
146 parts, built around the STM32G474RET6, B0505S-1WR3, ADUM4195-1BRIZ and IR2110L4. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Lu Testing KiCad files?
From the sakshamgupta2004/VegapodAll repository on GitHub, at the commit this page was made from: the board is Vegapod 24/Kicad Projects/6.0/LU_Testing/Lu_Testing/Lu_Testing.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Lu Testing design in my own project?
Its repository states no licence, so its author keeps all rights: ask sakshamgupta2004 before reusing the design.