
Chromapi motherboard v1
Mowibox/chromapi_motherboard
Raspberry Pi control HAT dedicated to the quadruped robot Chromapi.

Arduino-based punching for orienteering
Aop is an open-source printed circuit board by sakhnik, from the sakhnik/arduin-o-punch repository on GitHub, published under the GPL-2.0 licence. It is a 2-layer board of 45 × 55 mm with 23 parts on 24 nets, routed with 99 tracks and 0 vias.
It is built around the DS3231MZ+ and AO4435. Its parts include 5 resistors, 3 capacitors, 2 ICs, 2 switches and 1 diode. It belongs with the ESP32 and RISC-V boards of this library.
Arduino-based punching for orienteering with Mifare NFC cards.
In development. The progress can be followed in the YouTube playlist: Arduin-o-punch.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3, H4 |
| 2 | 4K7 | Resistor_SMD:R_1206_3216Metric | R4, R5 |
| 1 | 100 | Resistor_SMD:R_1206_3216Metric | R3 |
| 1 | 100K | Resistor_SMD:R_1206_3216Metric | R1 |
| 1 | 100nF | Capacitor_SMD:C_1206_3216Metric | C3 |
| 1 | 1K | Resistor_SMD:R_1206_3216Metric | R2 |
| 1 | 1uF | Capacitor_SMD:C_1206_3216Metric | C2 |
| 1 | 470uF | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C1 |
| 1 | AO4435 | AO4435:SOIC127P600X175-8N | Q1 |
| 1 | BAT+ | TestPoint:TestPoint_THTPad_4.0x4.0mm_Drill2.0mm | TP1 |
| 1 | BAT– | TestPoint:TestPoint_THTPad_4.0x4.0mm_Drill2.0mm | TP2 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | DS3231M | Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm | U2 |
| 1 | ESP32-C3_SUPERMINI_TH | ESP32-C3_SUPERMINI_TH:MODULE_ESP32-C3_SUPERMINI_TH | U1 |
| 1 | LED | LED_SMD:LED_1206_3216Metric | D1 |
| 1 | SW_Push | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P5.08mm_Vertical | SW1 |
| 1 | SW_Push | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P15.24mm_Horizontal | SW2 |
| 1 | UART | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | ~ | RFID-RC522:RFID-RC522_1 | M1 |

Mowibox/chromapi_motherboard
Raspberry Pi control HAT dedicated to the quadruped robot Chromapi.

paulmartinezcuenta/Proyecto_finales_mecatronica_ITLA
Monorepo for two mechatronics projects sharing a panelized PCB: HydroScan (autonomous IoT maritime buoy with LTE, GPS, and solar power) and AUTOAMBU (automated medical respirator prototype with DC control and USB fast…


zynthian/zynthian-hw
Zynthian hardware stuff: PCBs, schemes, parts specifications, pin assignment, ...

Open-Authenticator/hardware-design
Hardware design files for open authenticator

emertcakir/OpenAirScope
Open-source air quality and environmental monitoring node with STM32H743 + ESP32-C3, LoRaWAN, RS485, USB-C, Li-ion charging, and multi-sensor support.
fm4dd/picon-one-hw
KiCad PCB, gerber, and CAD files for the PiCon-One controller.

It measures 45 × 55 mm and has 2 copper layers, 1.6 mm thick.
23 parts, built around the DS3231MZ+ and AO4435. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the sakhnik/arduin-o-punch repository on GitHub, at the commit this page was made from: the board is arduino/pcb/aop/aop.kicad_pcb and its schematic arduino/pcb/aop/aop.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).