

Dnt pcb
Data & Telemetry Printed Circuit Board for the Team Averera
- Size
- 100 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 61
- Nets
- 68
- Pads
- 224
- Tracks, vias
- 172, 8
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 3 Oct 2026
- Updated
- 4 Oct 2026
Overview
Dnt pcb is an open-source printed circuit board by SaiCharan209, from the SaiCharan209/DNT_2027 repository on GitHub. It is a 2-layer board of 100 × 100 mm with 61 parts on 68 nets, routed with 172 tracks and 8 vias.
It is built around the LM1117S-ADJ and MM3Z3V3. Its parts include 20 capacitors, 13 resistors, 6 connectors, 4 ICs and 1 diode. It belongs with the STM32 boards of this library.
Main components
2LM1117S-ADJ
SOT-223-40℃~+125℃@(Tj) 1 1.238V~1.281V 1.2V@(1A) 100uV 12V 1A 75dB@(120Hz) Adjustable Over Temperature Protection Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSHTC Korea TAEJIN TechVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsMM3Z3V3
SOD-323-65℃~+150℃ 1 Independent 1kΩ 3.1V~3.5V 3.3V 300mW 5uA 95Ω SOD-323 Zener Diodes ROHSonsemiZener Diodes
Parts
61| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 10nF | Capacitor_SMD:C_0201_0603Metric_Pad0.64x0.40mm_HandSolder | C10, C13, C16, C18, C19 |
| 5 | 15k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3, R4, R5, R6, R7 |
| 5 | 1k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1, R8, R9, R10, R11 |
| 4 | 1uF | Capacitor_SMD:C_0201_0603Metric_Pad0.64x0.40mm_HandSolder | C8, C9, C12, C15 |
| 4 | Conn_01x01_Pin | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J12, J13, J14, J15 |
| 3 | C | Capacitor_SMD:C_0201_0603Metric_Pad0.64x0.40mm_HandSolder | C11, C14, C17 |
| 3 | WCS1700 | Library:WCS1600 | A1, A4, A5 |
| 2 | 100uF | Capacitor_SMD:C_Elec_6.3x7.7 | C22, C65 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric | R12, R13 |
| 2 | 10k | Potentiometer_THT:Potentiometer_Runtron_RM-065_Vertical | RV2, RV3 |
| 2 | 10uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C23, C64 |
| 2 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2 |
| 2 | Conn_01x01_Pin | Connector:Banana_Jack_1Pin | J10, J11 |
| 2 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | IR1, IR2 |
| 2 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | CAN1, UART1 |
| 2 | LM1117S-ADJ | Library:1117s_ADJ | U6, U7 |
| 2 | MM3Z3V3 | Diode_SMD:D_SOD-323_HandSoldering | Z1, Z3 |
| 1 | 100uF | Capacitor_SMD:CP_Elec_6.3x7.7 | C7 |
| 1 | 10uF | Capacitor_SMD:CP_Elec_4x5.7 | C6 |
| 1 | 4.7k | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R2 |
| 1 | Bootloader | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | Bootloader1 |
| 1 | I2C1 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | I2C1 |
| 1 | MM3Zxx | Diode_SMD:D_SOD-323F | D2 |
| 1 | Pwm_out1 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | Pwm_out1 |
| 1 | SPI1 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | SPI1 |
| 1 | STM32F103C8Tx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U3 |
| 1 | Thermistor_NTC_US | Resistor_THT:R_Radial_Power_L7.0mm_W8.0mm_Px2.40mm_Py2.30mm | TH1 |
| 1 | Thermistor_NTC_US | Library:Thermistor | TH2 |
| 1 | Voltage sense | Package_TO_SOT_SMD:SOT-23-5_HandSoldering | U5 |
Similar boards
- 2 layers121.1 × 136.9 mm

- 2 layers37 × 70.9 mm

Opendiag
maximus64/opendiag-hardware
OpenDIAG - Open Source OBD2 Interface (Hardware)
148 parts5CERN-OHL-S-2.0 - 2 layers81.7 × 63.6 mm

- 2 layers70.6 × 53.7 mm

Riscduino Uno
dineshannayya/riscduino_bringup
Host all the MPW Bring-up related Enviornment
95 parts2Apache-2.0 - 2 layers60.8 × 62.1 mm

- 2 layers65.5 × 41 mm

- 4 layers88.9 × 88.9 mm

- 2 layers390 × 78.2 mm

MBO
shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.
61 parts960Apache-2.0
Questions
How big is the Dnt pcb PCB?
It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Dnt pcb use?
61 parts, built around the LM1117S-ADJ and MM3Z3V3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Dnt pcb KiCad files?
From the SaiCharan209/DNT_2027 repository on GitHub, at the commit this page was made from: the board is averera_embedded_vertical/dnt_pcb/dnt_pcb.kicad_pcb and its schematic averera_embedded_vertical/dnt_pcb/dnt_pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Dnt pcb design in my own project?
Its repository states no licence, so its author keeps all rights: ask SaiCharan209 before reusing the design.