

Motor driver2003
kicad projects done by me
- Size
- 34.3 × 24.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 13
- Nets
- 21
- Pads
- 55
- Tracks, vias
- 73, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 11 Oct 2020
- Updated
- 11 Oct 2020
Overview
Motor driver2003 is an open-source printed circuit board by sagsal92, from the sagsal92/kicad-projects repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 34.3 × 24.1 mm with 13 parts on 21 nets, routed with 73 tracks and 0 vias.
It is built around the ULN2003A. Its parts include 4 resistors, 4 diodes, 4 connectors and 1 IC. It belongs with the robots and motor control boards of this library.
Main components
1README
README.mdkicad-projects
kicad projects done by me
Parts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2, D3, D4 |
| 4 | R | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R2, R3, R4 |
| 2 | Conn_01x07_Male | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J1, J2 |
| 1 | Conn_01x04_Male | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | Conn_01x05_Male | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J3 |
| 1 | ULN2003A | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U1 |
More from sagsal92/kicad-projects
1- 2 layers56.5 × 30 mm

Similar boards
- 2 layers107 × 54 mm

- 4 layers93.3 × 60.3 mm

Arduino 386EX V5
dbalsom/arduinoX86
An interface between an Arduino Due or Arduino GIGA and 8088, 8086, V20, V30, 186 or 286 CPUs
56 parts114 - 2 layers52 × 61 mm

Arduino motorfocus
fehlfarbe/arduino-motorfocus
Arduino motorfocus with moonlite protocol for telescopes
23 parts58MIT - 4 layers199.9 × 69.3 mm

Zaphod controller
Scottapotamas/zaphod-bot
A DIY high performance delta-bot for fun, and lightpainting...
251 parts53 - 4 layers285.1 × 48.1 mm

Ayab esp32
AllYarnsAreBeautiful/ayab-hardware
Contains the schematics and layouts for the AYAB Arduino shield
246 parts50CC-BY-SA-4.0 - 2 layers

- 2 layers40 × 80 mm

Splitflappcb
codingcatgirl/split-flap-fae-pcb
Alternative drop-in replacement PCB for David Kingsman's split-flap display
46 parts31Apache-2.0 - 2 layers177.9 × 187.4 mm

Audio board 0033 rev.a
palazzol/CyberamicControlCenter
Repo for docs and info about the Cyberamic Control Center
105 parts16
Questions
How big is the Motor driver2003 PCB?
It measures 34.3 × 24.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Motor driver2003 use?
13 parts, built around the ULN2003A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Motor driver2003 KiCad files?
From the sagsal92/kicad-projects repository on GitHub, at the commit this page was made from: the board is motor_driver2003/motor_driver2003.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Motor driver2003 design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).