2 layers100 × 34 mm
2 layers15.5 × 25.5 mm
Encoder
SageRobots/BoilerBot1- Size
- 15.5 × 25.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 4
- Nets
- 6
- Pads
- 16
- Tracks, vias
- 22, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 15 May 2021
- Updated
- 24 Jul 2022
Overview
Encoder is an open-source printed circuit board by SageRobots, from the SageRobots/BoilerBot repository on GitHub. It is a 2-layer board of 15.5 × 25.5 mm with 4 parts on 6 nets, routed with 22 tracks and 0 vias.
It is built around the PEC11R-4215F-S0024. Its parts include 2 resistors, 1 connector and 1 switch.
Main components
1Parts
4| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 1 | Conn_01x05_Male | Connector_JST:JST_PH_B5B-PH-K_1x05_P2.00mm_Vertical | J1 |
| 1 | PEC11R-4215F-S0024 | digikey-footprints:Rotary_Encoder_Switched_PEC11R | S1 |
Questions
How big is the Encoder PCB?
It measures 15.5 × 25.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Encoder use?
4 parts, built around the PEC11R-4215F-S0024. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Encoder KiCad files?
From the SageRobots/BoilerBot repository on GitHub, at the commit this page was made from: the board is PCBs/Encoder/Encoder.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Encoder design in my own project?
Its repository states no licence, so its author keeps all rights: ask SageRobots before reusing the design.
More from SageRobots/BoilerBot
2- 2 layers
Similar boards
- 4 layers121.9 × 109.2 mm
Plinkyblack hwmidi jacks
plinkysynth/plinky_public
a public release of the plinky sw and hw
300 parts227 - 6 layers66 × 66 mm
PD240W kicad
theohg/PD240W
PD240W is a complete hardware and firmware project converting USB-C Power Delivery into a programmable 240W (48V 5A) bench power supply, featuring C++ code for Raspberry Pi Pico, custom PCB Gerbers, and a 3D-printable…
299 parts125 - 2 layers139.7 × 123.2 mm
- 2 layers365 × 160 mm
OrthoCodeCase
Jrodna/OrthoCode
Ortholinear keyboard with thumb clusters and a rotary encoder designed with all THT components and regular keysets.
214 parts18GPL-3.0 - 4 layers29.3 × 187.1 mm
Left Frame
FlightDeckDIY/G1000-NXi-Mega
Welcome to the G1000 NXi Mega project! This repository contains the schematic and PCB design files for a custom-built G1000 avionics panel, designed specifically for use with flight simulators like Microsoft Flight…
127 parts14 - 2 layers61.9 × 62.6 mm
Keydeck
jimmydin7/keydeck
Keydeck is a hardware project, a custom designed macropad with a fully built from scratch PCB, schematic, routing, and 3D model + printed case.
9 parts7 - 4 layers155 × 103 mm
- 4 layers81.3 × 108 mm
Myriad 0.4
Emute-Lab-Instruments/Myriad
Sources for Emute Lab Instruments Myriad eurorack module
185 parts2MIT