2 layers148.3 × 108.4 mm
RJ Schematic v1.0
Jscott44/RTEP5-the-raspberry-jam
Realtime digital guitar effects pedal designed for Raspberry PI, written in C++
121 parts13MIT
2 layers
MacroX4
saddatahmad19/MacroX4My 4th itteration of a my perfect macropad
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 50
- Nets
- 47
- Pads
- 231
- Tracks, vias
- 285, 56
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 3 Jan 2024
- Updated
- 3 Jan 2024
Overview
MacroX4 is an open-source printed circuit board by saddatahmad19, from the saddatahmad19/MacroX4 repository on GitHub. It is a 2-layer board with 50 parts on 47 nets, routed with 285 tracks and 56 vias.
It is built around the EG1215AA. Its parts include 22 diodes, 22 switches, 1 IC and 1 connector. It belongs with the keyboards and input boards and the nRF52 and nRF5x boards of this library.
Main components
1README
README.mdMacroX4
by Saddat Ahmad
Started January 3rd, 2024 | 2:31 AM CST
Introduction
Hello, my name is Saddat Ahmad, and without further introduction, I present the MacroX4. An open source, wireless macropad with 18 keys, 2 rotary encoder switches, and 2 RGB lights.
Parts
50| Qty | Value | Footprint | References |
|---|---|---|---|
| 20 | Diode | ScottoKeebs_Components:Diode_SOD-123 | D1, D2, D3, D4, D5, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20 +4 |
| 18 | Keyswitch | ScottoKeebs_Hotswap:Hotswap_MX_1.00u | S1, S2, S3, S4, S5, S6, S7, S10, S11, S12, S13, S14, S15, S16, S18, S19 +2 |
| 4 | Mounting_Hole | MountingHole:MountingHole_2.5mm | H1, H2, H3, H4 |
| 2 | LED_WS2812B | ScottoKeebs_Components:LED_WS2812B | D21, D22 |
| 2 | RotaryEncoder_Switch | Rotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW1, SW2 |
| 1 | 1825910-6 | 1825910-6:SW_1825910-6-4 | SW3 |
| 1 | EG1215AA | EG1215AA:SW_EG1215AA | S17 |
| 1 | Nice_Nano_V2 | ScottoKeebs_MCU:Nice_Nano_V2 | U1 |
| 1 | S2B-PH-K-S_LF__SN_ | S2B-PH-K-S_LF__SN_:JST_S2B-PH-K-S_LF__SN_ | J1 |
Questions
What parts does the MacroX4 use?
50 parts, built around the EG1215AA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MacroX4 KiCad files?
From the saddatahmad19/MacroX4 repository on GitHub, at the commit this page was made from: the board is MacroX4.kicad_pcb and its schematic MacroX4.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the MacroX4 design in my own project?
Its repository states no licence, so its author keeps all rights: ask saddatahmad19 before reusing the design.
Similar boards
- 2 layers39 × 70 mm
- 4 layers67.7 × 43.9 mm
STM32Lora Tempreture sensor
AndreyPodlesni/stm32wl-lora-rf-pcb
4-layer RF PCB design of a low-power LoRa sensor node based on STM32WLE5CCU6, featuring 50Ω controlled impedance RF routing, SMA antenna interface, and HDC2022 temperature & humidity sensor. Designed in KiCad.
60 parts2MIT - 2 layers
- 2 layers18.5 × 21.3 mm
- 4 layers65.1 × 32.6 mm
Main Control
julien-martinez2/Reginleif
Custom robot based on the Reginleif from 86: Eighty-Six from Asato Asato
62 partsMIT - 2 layers
- 2 layers61 × 38 mm
