Skip to the content
2 layers100 × 20 mmBreakout TI FDC1004, the printed circuit board in 3D

Breakout TI FDC1004

s-light/TI_FDC1004_Breakout2

simple breakout board for TI FDC1004

Size
100 × 20 mm
Copper layers
2
Thickness
1.6 mm
Parts
20
Nets
18
Pads
51
Tracks, vias
233, 41
Pours
6
Routed
Yes
KiCad
KiCad 5 (file 20160815)
Created
24 Dec 2016
Updated
27 Apr 2017

Overview

Breakout TI FDC1004 is an open-source printed circuit board by s-light, from the s-light/TI_FDC1004_Breakout repository on GitHub. It is a 2-layer board of 100 × 20 mm with 20 parts on 18 nets, routed with 233 tracks and 41 vias.

It is built around the TPS70933DBV and BSS138. Its parts include 8 connectors, 4 capacitors, 4 resistors, 2 ICs and 2 transistors. It belongs with the interfaces and adapters boards of this library.

Main components

2

README

README.md

TI_FDC1004_Breakout

simple breakout board for TI FDC1004 (4 Channel Capacitance to Digital Converter for Capacitive Sensing Solutions)

You can find the datasheet at http://www.ti.com/product/fdc1004

the FDC1004 IOs are 3.3V only.
for 5V compatibility the breakout has a 3.3V Regulator and level-shifting for the I2C lines.

i have also written a arduino library for this device.

Creative Commons License
TI FDC1004 Breakout by Stefan Krüger (s-light) is licensed under a
Creative Commons Attribution 4.0 International License .

Parts

20
QtyValueFootprintReferences
410kResistors_SMD:R_0805_HandSolderingR1, R2, R3, R4
21uFCapacitors_SMD:C_0805_HandSolderingC2, C3
2BSS138TO_SOT_Packages_SMD:SOT-23Q1, Q2
10.1pFCapacitors_SMD:C_0805_HandSolderingC1
12.2uFCapacitors_SMD:C_0805_HandSolderingC4
1CINPin_Headers:Pin_Header_Straight_1x04P3
1CPAD1Pin_Headers:Pin_Header_Straight_1x01P4
1CPAD2Pin_Headers:Pin_Header_Straight_1x01P6
1CSHLDPin_Headers:Pin_Header_Straight_1x01P5
1I2CPin_Headers:Pin_Header_Straight_1x02P7
1PowerPin_Headers:Pin_Header_Straight_1x03P8
1SHLD1Pin_Headers:Pin_Header_Straight_1x01P1
1SHLD2Pin_Headers:Pin_Header_Straight_1x01P2
1TI_FDC1004Housings_SSOP:MSOP-10_3x3mm_Pitch0.5mmU1
1TPS70933DBVTO_SOT_Packages_SMD:SOT-23-5U2

Similar boards

  • 4 layers90 × 50 mmGreenmobi bms, the printed circuit board in 3D

    Greenmobi bms

    G-Pereira/greenmobi-bms

    A VESC compatible battery management system

    141 parts31CERN-OHL-S-2.0
  • 2 layers274.3 × 30.5 mmNumitron2, the printed circuit board in 3D

    Numitron2

    74hc595/Numitron-Clock

    An alarm clock using 9-segment numitron displays

    56 parts6BSD-3-Clause
  • 4 layers77 × 127 mmEsc sigma-4s panel, the printed circuit board in 3D

    Esc sigma-4s panel

    mstoilov/sigmadrone-esc

    Sigmadrone Electronic Speed Controller (ESC)

    514 parts5
  • 2 layers90 × 118 mmRoverbase, the printed circuit board in 3D

    Roverbase

    stephendade/roverbase

    A PCB design for Power and Motor control for small robots

    61 parts3GPL-3.0
  • 2 layers15 × 10 mmMagnetic switch, the printed circuit board in 3D

    Magnetic switch

    miket6000/SimpleSwitch

    A magnetic power switch for use in rocketry

    20 parts1CERN-OHL-W-2.0
  • 2 layers285 × 122.5 mmMk3, the printed circuit board in 3D

    Mk3

    codebot/mini_keyboard

    202 partsApache-2.0
  • 4 layers30 × 30 mmNikon GPS, the printed circuit board in 3D

    Nikon GPS

    MaizeShark/Nikon-NMEA-Pro

    low-power GNSS logger and BLE remote shutter for Nikon cameras

    79 parts
  • 6 layers140 × 56 mmTrenz mounted, the printed circuit board in 3D

    Trenz mounted

    naturalhazardscience/groundlark

    Open source hardware for community-powered citizen science

    207 partsMIT

Questions

How big is the Breakout TI FDC1004 PCB?

It measures 100 × 20 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Breakout TI FDC1004 use?

20 parts, built around the TPS70933DBV and BSS138. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Breakout TI FDC1004 KiCad files?

From the s-light/TI_FDC1004_Breakout repository on GitHub, at the commit this page was made from: the board is Breakout_TI_FDC1004.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Breakout TI FDC1004 design in my own project?

Its repository states no licence, so its author keeps all rights: ask s-light before reusing the design.