Skip to the content
2 layers64 × 29 mmLEDBoard 4x6 p20x5, the printed circuit board in 3D

LEDBoard 4x6 p20x5

s-light/LEDBoard_4x6_p20x5

LEDBoard 4x6; pixel pitch: 20mm x 5mm; LED: Rohm MSL0402RGBU1; Driver: TLC5971

Size
64 × 29 mm
Copper layers
2
Thickness
1.6 mm
Parts
54
Nets
95
Pads
590
Tracks, vias
1,213, 108
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20200119)
Created
16 Mar 2020
Updated
25 Mar 2020

Overview

LEDBoard 4x6 p20x5 is an open-source printed circuit board by s-light, from the s-light/LEDBoard_4x6_p20x5 repository on GitHub, published under the MIT licence. It is a 2-layer board of 64 × 29 mm with 54 parts on 95 nets, routed with 1,213 tracks and 108 vias.

It is built around the TLC5971PWP. Its parts include 12 capacitors, 6 resistors, 6 ICs and 4 connectors.

Main components

1

README

README.md

LEDBoard_4x6_p20x5

LED-Board 3d rendering LED-Board 3d rendering

  • LEDBoard with 4x6 LEDs
  • pixel pitch: 20mm x 5mm
  • LED: Rohm MSL0402RGB (1.8x1.6x0.5mm RGB)
  • Driver: TI TLC5971 (16bit dimming, constant current driver)






Project-Status

WIP

  • design schematics
  • layout pcb
  • order pcbs
  • order parts
  • solder boards
  • test
  • update documentation

Technical Information

there are groups of 4 LEDs that are controlled by one TLC5971.
every controller chip has 12 ConstantCurrent outputs. so every LED is controllable individual.

mapping

you need to create a mapping to linearize the order:

TODO: test & check if this table is correct

0123
0IC1 LED1IC1 LED2IC4 LED1IC4 LED2
1IC1 LED3IC1 LED4IC4 LED3IC4 LED4
2IC2 LED1IC2 LED2IC5 LED1IC5 LED2
3IC2 LED3IC2 LED4IC5 LED3IC5 LED4
4IC3 LED1IC3 LED2IC6 LED1IC6 LED2
5IC3 LED3IC3 LED4IC6 LED3IC6 LED4
c++ / arduino
c++
const uint8_t channel_position_map[4][4] = {
    { 0,  1, 12, 13},
    { 2,  3, 14, 15},
    { 4,  5, 16, 17},
    { 6,  7, 18, 19},
    { 8,  9, 20, 21},
    {10, 11, 22, 23},
};

HW

  • PCB size: ?x?x1,6mm
  • pixel-pitch: 20x5mm
  • 3.8V..5.5V
  • <= ??A (maximum)

controlling

for arduino you can use ulrichstern/Tlc59711

for other things have a look at LEDBoard_4x4_16bit


License

Creative Commons License
all files in LEDBoard_4x6_p20x5 by Stefan Krüger (s-light) are licensed under a
Creative Commons Attribution 4.0 International License .

all software parts/files are licensed under MIT.

Parts

54
QtyValueFootprintReferences
24LED_RGBLEDs_SMD_NICHIA:LED_RGB_0706_1816Metric_ROHM_ThermalViasD_0x0, D_0x1, D_0x2, D_0x3, D_0x4, D_0x5, D_1x0, D_1x1, D_1x2, D_1x3, D_1x4, D_1x5, D_2x0, D_2x1, D_2x2, D_2x3 +8
6100nCapacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolderC2, C4, C6, C8, C10, C12
610uF 6.3VCapacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolderC1, C3, C5, C7, C9, C11
62k7 0.1%Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolderR1, R2, R3, R4, R5, R6
6TLC5971PWPPackage_SO:HTSSOP-20-1EP_4.4x6.5mm_P0.65mm_EP3.4x6.5mm_Mask2.75x3.43mm_ThermalViasU1, U2, U3, U4, U5, U6
2MH_M3MountingHole:MountingHole_3.2mm_M3_ISO7380_PadH1, H2
1power_inConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ3
1power_outConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ4
1signal_inConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ1
1signal_outConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ2

Similar boards

  • 2 layers92.8 × 133.8 mmElectromagnetController V5, the printed circuit board in 3D

    ElectromagnetController V5

    brooklynresearch/FerrousControl

    Ferrofluid controlled through an electromagnetic array

    108 parts2
  • 2 layers344.8 × 217.8 mmClockblock pcb, the printed circuit board in 3D

    Clockblock pcb

    wileycousins/clockblock

    minimalistic LED clock in a block

    604 parts2
  • 2 layersLED Board PCB, the printed circuit board in 3D

    LED Board PCB

    s-light/LED_Board_PCB

    small round PCB with TI TLC5971 12ch 16bit LED-driver and NICHIA NSSM124AT RGB-LED. (original for Lumifluidus Prototyp)

    16 parts1
  • 2 layers12.3 × 7 mmLEDBoard 1x4 16bit highdensity, the printed circuit board in 3D

    LEDBoard 1x4 16bit highdensity

    s-light/LEDBoard_1x4_16bit_highdensity

    LEDBoard 1x4 High Density - with TLC5971 16Bit LED-Driver

    10 parts
  • 2 layers64 × 9 mmLEDBoard 4x2 p20x5, the printed circuit board in 3D

    LEDBoard 4x2 p20x5

    s-light/LEDBoard_4x2_p20x5

    LEDBoard 4x2; pixel pitch: 20mm x 5mm; LED: Rohm MSL0402RGBU1; Driver: TLC5971

    20 partsMIT
  • 2 layers100 × 100 mmLed controller, the printed circuit board in 3D

    Led controller

    willplatts/led_controller

    LED array PCB for lighting with daisy chain controller

    78 parts
  • 6 layersLED Driver, the printed circuit board in 3D

    LED Driver

    lenaschimmel/bestelampe

    Die beste Lampe

    21 parts18
  • 2 layers20.3 × 109.2 mmFireflies, the printed circuit board in 3D

    Fireflies

    apaleslimghost/synths

    schematics, PCBs, designs and code for Pale Slim Ghost Synthesisers hardware

    49 parts5

Questions

How big is the LEDBoard 4x6 p20x5 PCB?

It measures 64 × 29 mm and has 2 copper layers, 1.6 mm thick.

What parts does the LEDBoard 4x6 p20x5 use?

54 parts, built around the TLC5971PWP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the LEDBoard 4x6 p20x5 KiCad files?

From the s-light/LEDBoard_4x6_p20x5 repository on GitHub, at the commit this page was made from: the board is LEDBoard_4x6_p20x5.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the LEDBoard 4x6 p20x5 design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).