Skip to the content
4 layers28.8 × 48.8 mmReader Module, the printed circuit board in 3D

Electronic Gwent Game from the Witcher Series

Size
28.8 × 48.8 mm
Copper layers
4
Thickness
1.61 mm
Parts
68
Nets
59
Pads
226
Tracks, vias
258, 76
Pours
17
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
23 Jan 2023
Updated
1 Jun 2025

Overview

Reader Module is an open-source printed circuit board by s-grundner, from the s-grundner/RFID-Gwent repository on GitHub, published under the Apache-2.0 licence. It is a 4-layer board of 28.8 × 48.8 mm with 68 parts on 59 nets, routed with 258 tracks and 76 vias.

It is built around the STM32L431KBU6, SN65HVD230D and USBLC6-2P6. Its parts include 38 capacitors, 11 resistors, 3 ICs, 2 diodes and 2 connectors. It belongs with the radio and wireless boards and the STM32 boards of this library.

Main components

3

README

README.md

RFID-Gwent

Electronic Gwent Game from the Witcher Series

Better Idea

  • individual reading antennas
  • connected to an rf-switch / multiplexer with an sma connector
  • Single Controller saves cost and is easier expandable
  • maybe one module for each row is managable?

Card Slot Reader Module PCB

Top PCBBottom PCB

Parts

68
QtyValueFootprintReferences
102u2Capacitor_SMD:C_0402_1005MetricC4, C5, C7, C9, C11, C13, C15, C19, C28, C29
9100nCapacitor_SMD:C_0402_1005MetricC1, C2, C3, C8, C20, C21, C22, C23, C24
510nCapacitor_SMD:C_0402_1005MetricC6, C10, C12, C14, C16
456RResistor_SMD:R_0402_1005MetricR5, R6, R7, R8
31n2Capacitor_SMD:C_0402_1005MetricC30, C32, C33
327pCapacitor_SMD:C_0402_1005MetricC17, C18, C26
3~JLC:JLC_ToolingH5, H6, H7
2150nInductor_SMD:L_0805_2012MetricL1, L2
247pCapacitor_SMD:C_0402_1005MetricC25, C38
2680pCapacitor_SMD:C_0402_1005MetricC34, C36
2MountingHole_PadMountingHole:MountingHole_3.2mm_M3H3, H4
10RResistor_SMD:R_0402_1005MetricR11
1100 @ 100MHzInductor_SMD:L_0805_2012MetricFB2
1100RResistor_SMD:R_0402_1005MetricR3
1100pCapacitor_SMD:C_0402_1005MetricC37
110kResistor_SMD:R_0402_1005MetricR4
113.56MHzCrystal:Crystal_SMD_3225-4Pin_3.2x2.5mmY1
11k5Resistor_SMD:R_0805_2012MetricR2
11k5Resistor_SMD:R_0402_1005MetricR9
11n8Capacitor_SMD:C_0402_1005MetricC31
1220pCapacitor_SMD:C_0402_1005MetricC35
147kResistor_SMD:R_0402_1005MetricR1
1680RResistor_SMD:R_0402_1005MetricR10
168pCapacitor_SMD:C_0402_1005MetricC27
1Antenna_LoopRF_Antenna:Custom_RFID_1AE1
1Conn_01x04_PinConnector_Molex:Molex_Micro-Latch_53254-0470_1x04_P2.00mm_HorizontalJ2
1LOGOSymbol:RFID-Gwent_MG***
1NRSTButton_Switch_SMD:Panasonic_EVQPUL_EVQPUCSW1
1SN65HVD230Package_SO:SOIC-8_3.9x4.9mm_P1.27mmU2
1STM32L431KBU6Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.45x3.45mmU1
1SW-DebugConnector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_VerticalJ1
1TRF7964ARHBRSamacSys_Parts:QFN50P500X500X100-33N-DD1
1USBLC6-2Package_TO_SOT_SMD:SOT-23-6U3
1WTLED_SMD:LED_0805_2012MetricD2

Similar boards

  • 4 layers49.8 × 44.2 mmSTM32F4 HexGauge V3, the printed circuit board in 3D

    STM32F4 HexGauge V3

    s-grundner/CTN-HexGauge

    Customizable Automotive Gauge with CAN Bus interface and Integrated Inertial Measurement Unit

    73 parts1
  • 4 layers150 × 100 mmPnP Mother Board, the printed circuit board in 3D

    PnP Mother Board

    Arnaud-Apu-Fanovard/Pick-Place

    Pick and Place automatisée pour PCB designer

    356 parts
  • 6 layers51 × 53.5 mmCustom fc rat, the printed circuit board in 3D

    Custom fc rat

    Ekta-Gupta27/custom-flight-controller-pcb

    Custom flight controller PCB designed in KiCad with STM32F7, multiple sensors, CAN, USB, telemetry, PWM and IO interfaces.

    122 parts
  • 4 layers80 × 80 mmObc, the printed circuit board in 3D

    Obc

    OSUSat/cubesat

    Open Source Earth Imaging Satellite Hardware + Firmware

    151 parts8MIT
  • 4 layers62 × 74.5 mmControl Board POC, the printed circuit board in 3D

    Control Board POC

    ParadigmEngineering/aks-2026-hardware

    Autonomous Karting Series (2026) hardware for Paradigm Engineering

    85 parts1
  • 4 layers106 × 98 mmMotion control, the printed circuit board in 3D

    Motion control

    menloresearch/asimov-1

    v1 of Asimov, an open-source humanoid robot

    76 parts1.4kCERN-OHL-S-2.0
  • 2 layers40.5 × 58 mmInitial v, the printed circuit board in 3D

    Initial v

    tenderlove/initial-v

    It's a BMW shifter converted to a Bluetooth Keyboard that you use with Vim

    30 parts1kApache-2.0
  • 4 layers42 × 42 mmHuvud, the printed circuit board in 3D

    Huvud

    bondus/KlipperToolboard

    A 3D printer tool head controller board

    126 parts373GPL-3.0

Questions

How big is the Reader Module PCB?

It measures 28.8 × 48.8 mm and has 4 copper layers, 1.61 mm thick.

What parts does the Reader Module use?

68 parts, built around the STM32L431KBU6, SN65HVD230D and USBLC6-2P6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Reader Module KiCad files?

From the s-grundner/RFID-Gwent repository on GitHub, at the commit this page was made from: the board is manufacturing/Reader_Module/Reader_Module.kicad_pcb and its schematic manufacturing/Reader_Module/Antenna.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Reader Module design in my own project?

Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).