2 layers
OpenMQTTGatewayPCB
ebrithiljonas/OMG_PCB
All in One PCB for the OpenMQTTGateway Project
36 parts7GPL-3.0
2 layers69.7 × 23.7 mm
IR sensor
s-a-usman/IR-sensorKiCad design files for an IR sensor to be used for a line follower robot. Not tested yet!
- Size
- 69.7 × 23.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 12
- Nets
- 10
- Pads
- 34
- Tracks, vias
- 91, 7
- Pours
- 27
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 14 Sep 2022
- Updated
- 14 Sep 2022
Overview
IR sensor is an open-source printed circuit board by s-a-usman, from the s-a-usman/IR-sensor repository on GitHub, published under the MIT licence. It is a 2-layer board of 69.7 × 23.7 mm with 12 parts on 10 nets, routed with 91 tracks and 7 vias.
It is built around the IR204-A-L. Its parts include 4 resistors, 4 diodes, 1 IC and 1 connector. It belongs with the sensors and measurement and robots and motor control boards of this library.
Main components
1README
README.mdIR-sensor
A KiCad design files for an IR sensor to be used for a line follower robot. Not tested yet!
Parts
12| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100 | Resistor_SMD:R_1210_3225Metric | R1, R3 |
| 2 | 10k | Resistor_SMD:R_1210_3225Metric | R2, R4 |
| 2 | D_Photo_Filled | LED_THT:LED_D3.0mm_Clear | D2, D4 |
| 2 | IR204A | LED_THT:LED_D3.0mm_IRBlack | D1, D3 |
| 2 | R_Potentiometer | Potentiometer_SMD:Potentiometer_Bourns_3224J_Horizontal | RV1, RV2 |
| 1 | Conn_01x03_Male | Connector_JST:JST_EH_S4B-EH_1x04_P2.50mm_Horizontal | J1 |
| 1 | LM358M/NOPB | Package_DIP:DIP-8_W7.62mm_LongPads | U1 |
Similar boards
- 4 layers104.2 × 77.7 mm
- 2 layers38.3 × 25.2 mm
- 2 layers75 × 40 mm
Remote
bismarx-v1/Sumec-Remote
IR remote for MiniSumo, schematic and partial code was forked from p1rse
47 parts1 - 2 layers30.5 × 22.9 mm
Ir project
hitendravalhe/IR_sensor_pcb_design
This repository contains the design files and documentation for an Infrared (IR) sensor PCB with an integrated LM35 temperature sensor.
9 parts1 - 2 layers25.4 × 40.1 mm
PTL IR remote
PostTenebrasLab/PTL-IR_remote
IR remote based on esp8266 with OTA, MQTT, web server, DHT22, brightness, IRM
22 parts1GPL-3.0 - 2 layers210 × 126 mm
- 2 layers22.9 × 10.9 mm
Questions
How big is the IR sensor PCB?
It measures 69.7 × 23.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the IR sensor use?
12 parts, built around the IR204-A-L. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the IR sensor KiCad files?
From the s-a-usman/IR-sensor repository on GitHub, at the commit this page was made from: the board is IR_Sensor.kicad_pcb and its schematic IR_Sensor.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the IR sensor design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).