Skip to the content
2 layers114.3 × 61.9 mmTamagotchi circuit, the printed circuit board in 3D

Tamagotchi circuit

ryukgod26/Tamagotchi

There are 4 Panels for the 3D Model. Firstly, We attach the Panel 1 and Panel 2 Together with Glue. Then we attach the Panel 3 and Panel 4 together with Glue.

Size
114.3 × 61.9 mm
Copper layers
2
Thickness
1.6 mm
Parts
8
Nets
41
Pads
61
Tracks, vias
53, 0
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
23 May 2026
Updated
21 Jun 2026

Overview

Tamagotchi circuit is an open-source printed circuit board by ryukgod26, from the ryukgod26/Tamagotchi repository on GitHub. It is a 2-layer board of 114.3 × 61.9 mm with 8 parts on 41 nets, routed with 53 tracks and 0 vias.

It is built around the FSM8JH. Its parts include 4 switches and 1 connector. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

1

README

Readme.md

Tamagotchi

This is a Tamagotchi Created by me for fun and experiment. This uses Arduino Nano as the Processor. I have also created a Basic 3D Model for this Project.

Required Electronics

  • Ardunino Nano x 1
  • 1000mah Battery x 1
  • Charging module x 1
  • 128X64 OLED Display x 1
  • Push Buttons x 3
  • Slide Switch x 1

Why

I created this Project to Create a Compact device by using many non smd components. I just wanted to create something that I can Play wit in free time.

Zine

zine

3D Model Instructions

There are 4 Panels for the 3D Model. Firstly, We attach the Panel 1 and Panel 2 Together with Glue. Then we attach the Panel 3 and Panel 4 together with Glue. Then We attach the components inside them according to the cutouts Like Panel1 is for Oled Display, Panel 2 is for Battery , Panel 3 is for charging module and Panel 4 is for Arduino Nano. Wire them together according to the schmatics and upload the code to the Arduino Nano.

Panel 1

Tamagotchi Panel1

Panel 2

Tamagotchi Panel2

Panel 3

Tamagotchi Panel3

Panel 4

Tamagotchi Panel4

Panel1 and Panel2 Glued Together

Tamagotchi First Part

Panel3 and Panel4 Glued Together

Tamagotchi Second Part

Shell

Tamagotchi Shell

BOM (Bill of Materials)

NamePurposeQuantityTotal Cost (USD)LinkDistributor
Arduino NanoProcessor1$2.00robuRobu
OLED DisplayDisplay1$2.2robuRobu
Slide SwitchPower Switch1$0.3robuRobu
Charging ModuleCharging Module1$1.9robuRobu
Push ButtonsButtons10 (only 3 are needed)$0.2robuRobu
Lithium BatteryBattery1$4robuRobu

Parts

8
QtyValueFootprintReferences
3FSM8JHFSM8JH:SW_FSM8JHS1, S2, S3
1Arduino_Nano_EveryModule:Arduino_NanoA1
1BatteryBattery:Battery_Panasonic_CR1025-VSK_Vertical_CircularHolesBT1
1Conn_01x06TP4056-18650-master:TP4056-18650J1
1OLED_128X64_1.3_I2COLED_128X64_1.3_I2C:LCD_OLED_128X64_1.3_I2CDS1
1SW_SPDTEG1218:SW_EG1218SW1

Similar boards

  • 2 layers50.4 × 75 mmOpen-01-pcb, the printed circuit board in 3D

    Open-01-pcb

    RonishNadar/open-01

    OPEN-01 - Omnidirectional Perception & Embedded Navigation. An open-source, low-cost ROS2 robot platform.

    64 parts1Apache-2.0
  • 4 layers42.2 × 101.8 mmDatalogger PCB, the printed circuit board in 3D

    Datalogger PCB

    uwp-sammckee/DataLogger

    PACKET BREAKDOWN: 0-roll\ 1-pitch\ 2-yaw\ 3-alitude\ 4-pressure\ 5-temperature\ 6-accX\ 7-accY\ 8-accZ\ 9-gyroX\ 10-gyroY\ 11-gyroZ\ 12-time\ 13-placeholder\ 14-placeholder\ 15-placeholder

    54 parts1
  • 2 layers76.2 × 35.3 mmKeychainFlashLightAdvanced, the printed circuit board in 3D

    KeychainFlashLightAdvanced

    Casperdroid5/KiCad7-Workshop-ESE-day

    An "in class" workshop for absolute beginners and more experienced KiCad PCB designers

    6 parts
  • 2 layers47.4 × 68.9 mmMP3 Player, the printed circuit board in 3D

    MP3 Player

    Hasnat4763/Shanda-Pod-v1

    It is an MP3 player which can also play audio via bluetooth A2DP source and a PCM5102A module

    16 parts
  • 2 layers70 × 82 mmEspSkipper2, the printed circuit board in 3D

    EspSkipper2

    kisbAlt/espSkipper_v2

    ESP32 based, open source, low cost boat instrumentation to replace proprietary marine systems.

    74 parts
  • 2 layers90 × 100 mmPower ELect, the printed circuit board in 3D

    Power ELect

    knx444/rarara

    35 parts

Questions

How big is the Tamagotchi circuit PCB?

It measures 114.3 × 61.9 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Tamagotchi circuit use?

8 parts, built around the FSM8JH. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Tamagotchi circuit KiCad files?

From the ryukgod26/Tamagotchi repository on GitHub, at the commit this page was made from: the board is Hardware/tamagotchi_circuit/tamagotchi_circuit.kicad_pcb and its schematic Hardware/tamagotchi_circuit/tamagotchi_circuit.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Tamagotchi circuit design in my own project?

Its repository states no licence, so its author keeps all rights: ask ryukgod26 before reusing the design.