

Micro Breakout
Stanford Robosub Electrical Repository
- Size
- 123.5 × 83 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 52
- Nets
- 74
- Pads
- 329
- Tracks, vias
- 662, 35
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 21 Feb 2026
- Updated
- 6 Nov 2026
Overview
Micro Breakout is an open-source printed circuit board by ryos17, from the ryos17/robosub-ee repository on GitHub. It is a 2-layer board of 123.5 × 83 mm with 52 parts on 74 nets, routed with 662 tracks and 35 vias.
It is built around the MS560702BA03-50 and L78M05ABDT-TR. Its parts include 25 connectors, 9 capacitors, 8 resistors, 5 ICs and 1 transistor. It belongs with the interfaces and adapters boards and the NXP (LPC, Kinetis, i.MX RT) boards of this library.
Main components
2MS560702BA03-50
SMD-8P-40℃~+85℃ 1.5mbar 1.8V~3.6V 140nA 1Kpa~1.2bar I2C、SPI Yes SMD-8P Pressure Sensors ROHSTE ConnectivityPressure SensorsL78M05ABDT-TR
TO-252-2(DPAK)-40℃~+125℃@(Tj) 1 2V@(350mA) 35V 40uV 500mA 5V 62dB@(120Hz) 6mA Fixed Over Temperature Protection、Short Circuit Protection Positive TO-252-2(DPAK) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSSTMicroelectronicsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdStanford RoboSub — Electrical Repo
Electrical subsystem for the Stanford RoboSub AUV. It includes PCB designs (KiCad), firmware, Python tools, and research.
Repository layout
platformio.ini— PlatformIO config for building/flashing the Teensy firmware.src_dirpoints at one sketch folder; change it to pick which firmware gets flashed (see comments in the file).gen1/— First hardware generation: PCBs only. Deprecated; the sub no longer exists.gen2/— Second (current) generation: PCBs and firmware for the audio and Teensy boards.gen3/— Third generation (in progress): ongoing designs of PCBs with Micro Breakout, Battery Boards, Power Distribution.imported_parts/— Shared KiCad libraries: symbols, footprints, 3D models, import script, and the JLC parts order log.misc/— Older and experimental material.research/— Research work (whisper-based intervehicle communication).
Parts
52| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4, R5, R6, R7, R8, R10, R11 |
| 4 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C3, C5, C15 |
| 4 | MountingHole | MountingHole:MountingHole_4.3mm_M4 | H6, H7, H8, H9 |
| 3 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6, C7, C8 |
| 2 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C4 |
| 2 | Conn_01x24 | Connector_PinHeader_2.54mm:PinHeader_1x24_P2.54mm_Vertical | J4, J6 |
| 1 | 3.3V Line | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J20 |
| 1 | 5V Line | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J21 |
| 1 | AMS1117-3_3V_C5120796 | robosub_footprints:AMS1117-3_3V_C5120796 | U4 |
| 1 | BlueRobotics Depth Sensor | robosub_footprints:430450412 | J1 |
| 1 | External Battery | Connector_AMASS:AMASS_XT60PW-F_1x02_P7.20mm_Horizontal | J3 |
| 1 | External I2C | Connector_AMASS:AMASS_XT30PW-F_1x02_P2.50mm_Horizontal | J5 |
| 1 | Extra I2C #1 | robosub_footprints:430450412 | J7 |
| 1 | Extra I2C #2 | robosub_footprints:430450412 | J8 |
| 1 | Extra I2C #3 | robosub_footprints:430450412 | J15 |
| 1 | Extra I2C #4 | robosub_footprints:430450412 | J18 |
| 1 | Extra I2C #5 | robosub_footprints:430450412 | J17 |
| 1 | Extra I2C #6 | robosub_footprints:430450412 | J16 |
| 1 | Extra SPI #1 | robosub_footprints:430450612 | J22 |
| 1 | Extra SPI #2 | robosub_footprints:430450612 | J23 |
| 1 | Extra SPI #3 | robosub_footprints:430450612 | J24 |
| 1 | GND Line | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J19 |
| 1 | Interconnect | robosub_footprints:SBH11-PBPC-D05-ST-BK | J2 |
| 1 | Kill Switch | robosub_footprints:430450212 | J10 |
| 1 | L78M05ABDT-TR | robosub_footprints:L78M05ABDT-TR | Q7 |
| 1 | LED1 | robosub_footprints:430450212 | J12 |
| 1 | LED2 | robosub_footprints:430450212 | J13 |
| 1 | Leak Sensor | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J14 |
| 1 | Lumen PWM | robosub_footprints:430450212 | J9 |
| 1 | MCP9808-E_MS | robosub_footprints:MCP9808-E_MS | U5 |
| 1 | MS560702BA03-50 | robosub_footprints:MS560702BA03-50 | U3 |
| 1 | SHT31-DIS-B | robosub_footprints:SHT31-DIS-B | U1 |
| 1 | Secondary UART | robosub_footprints:430450412 | J25 |
| 1 | StarOddi CTD Comms | robosub_footprints:430450412 | J11 |
| 1 | Teensy4_1 | robosub_footprints:Teensy4_1 | U6 |
More from ryos17/robosub-ee
12- 2 layers220.2 × 164.9 mm

- 4 layers129.3 × 99 mm

- 2 layers110.9 × 110.5 mm

- 2 layers244 × 107 mm

- 2 layers151.4 × 80 mm

- 2 layers130 × 61 mm

- 2 layers70 × 94 mm

- 2 layers120 × 60 mm

- 4 layers120 × 64 mm

- 2 layers92 × 78 mm

- 4 layers65.6 × 74.8 mm

- 2 layers34.3 × 87.9 mm

Similar boards
- 4 layers76 × 100 mm

- 4 layers164 × 118 mm

OpenEFI rev4 bkp
Churrosoft/OpenEFI-PCB
Coleccion de PCB y planos recomendados para montar una OpenEFI
345 parts8CERN-OHL-S-2.0 - 4 layers100 × 100 mm

Pico Dev iCE
frohro/pico-dev-ice
This is a direct down conversion (DDC) HF transceiver & VNA using the Raspberry Pi Pico and the iCE40UP5K.
294 parts3 - 4 layers116.5 × 98 mm

Hw v1
Churrosoft/uEFI-v6.x
Speeduino compatible board, x4 ignition channels, x4 injection channels, 2&4 wire IAC
248 parts2 - 4 layers50 × 50 mm

- 4 layers129.5 × 129.5 mm

- 2 layers60.3 × 49.5 mm

- 2 layers50 × 80 mm

Timer
Dhruv6576/CYTM-Digital-Timer
24 VDC cyclic relay timer: MG51 firmware + KiCad PCB generated from scratch
45 parts
Questions
How big is the Micro Breakout PCB?
It measures 123.5 × 83 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Micro Breakout use?
52 parts, built around the MS560702BA03-50 and L78M05ABDT-TR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Micro Breakout KiCad files?
From the ryos17/robosub-ee repository on GitHub, at the commit this page was made from: the board is gen3/PCBs/Micro_Breakout/Micro_Breakout.kicad_pcb and its schematic gen1/PCBs/Compute_Power_Board/Compute_Power_Board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Micro Breakout design in my own project?
Its repository states no licence, so its author keeps all rights: ask ryos17 before reusing the design.