

Xing Signals XIAO
RP2040 RR Crossing signal controller
- Size
- 60.3 × 49.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 51
- Nets
- 43
- Pads
- 148
- Tracks, vias
- 247, 9
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 25 Jan 2024
- Updated
- 27 Feb 2025
Overview
Xing Signals XIAO is an open-source printed circuit board by buelowp, from the buelowp/rrcrossing repository on GitHub. It is a 2-layer board of 60.3 × 49.5 mm with 51 parts on 43 nets, routed with 247 tracks and 9 vias.
It is built around the L78M05ABDT-TR, MMBT2222A and DB107S, with the RB160M-30 among its other parts. Its parts include 18 resistors, 8 diodes, 8 connectors, 7 transistors and 3 capacitors.
Main components
4L78M05ABDT-TR
TO-252-2(DPAK)-40℃~+125℃@(Tj) 1 2V@(350mA) 35V 40uV 500mA 5V 62dB@(120Hz) 6mA Fixed Over Temperature Protection、Short Circuit Protection Positive TO-252-2(DPAK) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSSTMicroelectronicsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsMMBT2222A
SOT-23-55℃~+150℃ 1 NPN 100 100nA 1V 300MHz 300mW 40V 600mA 6V NPN Standalone SOT-23 Bipolar (BJT) ROHShongjiachengBipolar (BJT)DB107S
DBS-55℃~+150℃ 1.1V@1A 10uA@1kV 1A 1kV 30A Single-Phase Rectifier DBS Bridge Rectifiers ROHSMDDBridge RectifiersRB160M-30
SOD-1231A 30A 30V 480mV@1A 50uA Standalone SOD-123 Schottky Diodes ROHShongjiachengSchottky Diodes
README
README.mdParts
51| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 1kΩ | PCM_JLCPCB:R_0402 | R3, R6, R7, R8, R9, R14, R19, R20 |
| 8 | 220Ω | PCM_JLCPCB:R_0402 | R1, R11, R12, R13, R15, R16, R17, R18 |
| 7 | MMBT2222A | PCM_JLCPCB:Q_SOT-23 | Q1, Q2, Q3, Q4, Q5, Q6, Q7 |
| 5 | Yellow | PCM_JLCPCB:D_0603 | D1, D2, D3, D4, D5 |
| 3 | +5V | TestPoint:TestPoint_Pad_2.0x2.0mm | TP3, TP4, TP5 |
| 2 | Red | PCM_JLCPCB:D_0603 | D6, D7 |
| 1 | 100nF | PCM_JLCPCB:C_0603 | C4 |
| 1 | 100uf | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C1 |
| 1 | 120Ω | PCM_JLCPCB:R_0402 | R10 |
| 1 | 1kΩ | PCM_JLCPCB:R_1206 | R2 |
| 1 | 330nF | PCM_JLCPCB:C_0805 | C2 |
| 1 | Conn_01x06_Socket | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J3 |
| 1 | Conn_02x03_Top_Bottom | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J4 |
| 1 | DB107S | PCM_JLCPCB:DBS_L8.2-W6.4-P5.10-LS10.0-BL | DB1 |
| 1 | DET DBG | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J1 |
| 1 | GND | TestPoint:TestPoint_Pad_2.0x2.0mm | TP1 |
| 1 | L78M05ABDT-TR | PCM_JLCPCB:TO-252-2_L6.5-W6.1-P4.58-LS10.0-TL | U2 |
| 1 | MOUDLE-SEEEDUINO-XIAO | Personal:MOUDLE14P-2.54-21X17.8MM | U1 |
| 1 | Power In | Connector_Molex:Molex_KK-396_A-41791-0002_1x02_P3.96mm_Vertical | J2 |
| 1 | RB160M-30 | PCM_JLCPCB:D_SOD-123 | D8 |
| 1 | Sensor Ground | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J7 |
| 1 | Sensor Power | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | Sensor Signal | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J8 |
| 1 | Signals | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J10 |
More from buelowp/rrcrossing
1- 2 layers20.5 × 19 mm

Similar boards
- 2 layers54.4 × 63.7 mm

WiC64 Plugin
WiC64-Team/wic64-hardware
WiC64 WiFi Adapter schematics and gerber files
59 parts20CC-BY-4.0 - 4 layers78 × 78 mm

- 2 layers139.2 × 95.6 mm

IGBT DRIVER
EmadBahra/open-source-IGBT-gate-driver
This is a beta version and it's not tested yet, so use it at your own risk under GPL v3
240 parts5 - 2 layers90 × 100 mm

Olivia control
AlterMundi-MonitoreoyControl/Proyecto-Incubadora
Is an innovative project aimed at enhancing the efficiency and productivity of poultry incubators in family farming.
51 parts4LGPL-2.1 - 4 layers78 × 54.3 mm

- 2 layers100 × 100 mm

FreeDSP Catamaran
freeDSP/FreeDSP_Catamaran_AB
A mono contruction Differntial 1 Input 4 output ADAU1701 DSP board, 96kHz TDM8 interlink is available.
257 parts12CC0-1.0 - 4 layers102.4 × 27.5 mm

- 2 layers134 × 109.5 mm

FreeDSP SMD AB plus
CyberPit/FreeDSP_Classic_SMD_AB_plus-II
An extended version of FreeDSP Classic SMD A/B
233 parts6
Questions
How big is the Xing Signals XIAO PCB?
It measures 60.3 × 49.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Xing Signals XIAO use?
51 parts, built around the L78M05ABDT-TR, MMBT2222A, DB107S and RB160M-30. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Xing Signals XIAO KiCad files?
From the buelowp/rrcrossing repository on GitHub, at the commit this page was made from: the board is eda/monitor/Xing Signals XIAO.kicad_pcb and its schematic eda/monitor/Xing Signals XIAO.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Xing Signals XIAO design in my own project?
Its repository states no licence, so its author keeps all rights: ask buelowp before reusing the design.
