
Clock
prydin/toy-dac
A 1-bit ΔΣ stereo audio DAC implemented on a Xilinx 7-series FPGA (Digilent Cmod S7), driven from an I²S input.

Spdif resampler is an open-source printed circuit board by ryandenyer, from the ryandenyer/Digital-Audio-Converter repository on GitHub. It is a 4-layer board of 50 × 20 mm with 27 parts on 27 nets, routed with 251 tracks and 83 vias.
It is built around the DIT4096IPW, SRC4190IDBRQ1 and 74HC86D, with the LP5907MFX-3.3/NOPB(MS) and C3391-22.5792 among its other parts. Its parts include 8 capacitors, 7 resistors, 4 ICs, 2 connectors and 1 switch.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 0.1u | Capacitor_SMD:C_0603_1608Metric | C3, C4, C6, C8, C10, C12 |
| 5 | 47k | Resistor_SMD:R_0603_1608Metric | R3, R4, R5, R6, R7 |
| 4 | MountingHole | Library:MountingHole_2.1mm_simple | H1, H2, H3, H4 |
| 2 | 10u | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 2 | 47 | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 1 | 74HC86 | Package_SO:TSSOP-14_4.4x5mm_P0.65mm | U1 |
| 1 | C3391-22.5792 | Crystal:Crystal_SMD_7050-4Pin_7.0x5.0mm | Y1 |
| 1 | Conn_01x04_Pin | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J2 |
| 1 | Conn_01x06_Pin | Connector_JST:JST_SH_SM06B-SRSS-TB_1x06-1MP_P1.00mm_Horizontal | J1 |
| 1 | DIT4096IPW | Package_SO:TSSOP-28_4.4x9.7mm_P0.65mm | IC2 |
| 1 | LP5907MFX-3.3_NOPB | Package_TO_SOT_SMD:SOT-23-5 | IC3 |
| 1 | SRC4190IDBR | Package_SO:SSOP-28_5.3x10.2mm_P0.65mm | IC1 |
| 1 | SW_DIP_x05 | Button_Switch_SMD:SW_DIP_SPSTx05_Slide_KingTek_DSHP05TS_W7.62mm_P1.27mm | SW1 |

prydin/toy-dac
A 1-bit ΔΣ stereo audio DAC implemented on a Xilinx 7-series FPGA (Digilent Cmod S7), driven from an I²S input.






Kaiser041224/HPM5361-RMCS_Slave-Pro
HPM5361-RMCSSlave-V1.0 是一个基于 KiCad 9 的硬件工程,核心主控为 HPM5361ICB1。从顶层框图、层级原理图和关键器件选型来看,这块板更像一块面向机器人/运动控制场景的从控板,用于通信汇聚、PWM 外设输出、姿态感知、板载存储和基础人机交互。

It measures 50 × 20 mm and has 4 copper layers, 1.57 mm thick.
27 parts, built around the DIT4096IPW, SRC4190IDBRQ1, 74HC86D and LP5907MFX-3.3/NOPB(MS). The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ryandenyer/Digital-Audio-Converter repository on GitHub, at the commit this page was made from: the board is spdif_resampler/spdif_resampler.kicad_pcb and its schematic spdif_resampler/spdif_resampler.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask ryandenyer before reusing the design.