
Panel daisy
ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

Tube guitar pre-amp powered by 12v dc power supply
Lv amp is an open-source printed circuit board by russellmcc, from the russellmcc/lv-amp repository on GitHub. It is a 2-layer board of 127 × 76.2 mm with 89 parts on 57 nets, routed with 281 tracks and 17 vias.
It is built around the TL072. Its parts include 35 resistors, 28 capacitors, 5 ICs, 3 connectors and 2 diodes. It belongs with the audio and music boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | TestPoint | TestPoint:TestPoint_THTPad_2.0x2.0mm_Drill1.0mm | TP1, TP2, TP3, TP4, TP5, TP6 |
| 5 | 220k | Resistor_SMD:R_1210_3225Metric | R3, R10, R16, R20, R27 |
| 4 | 0.022uF | Capacitor_THT:C_Rect_L13.0mm_W4.0mm_P10.00mm_FKS3_FKP3_MKS4 | C17, C20, C21, C22 |
| 4 | 100uF | Capacitor_Tantalum_SMD:CP_EIA-7343-43_Kemet-X | C8, C26, C27, C28 |
| 4 | 1uF | Capacitor_SMD:CP_Elec_4x5.4 | C3, C10, C11, C24 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C6, C7, C9 |
| 3 | 100k | Resistor_SMD:R_2512_6332Metric | R2, R17, R22 |
| 3 | 100k | Resistor_SMD:R_0603_1608Metric | R18, R26, R30 |
| 3 | 1uF | Capacitor_THT:C_Rect_L18.0mm_W7.0mm_P15.00mm_FKS3_FKP3 | C16, C18, C23 |
| 3 | 2.7k | Resistor_SMD:R_1206_3216Metric | R9, R19, R23 |
| 3 | 470k | Resistor_SMD:R_1206_3216Metric | R14, R32, R33 |
| 3 | ECC83 | lv_amp:12ax7 | U3, U4, U5 |
| 2 | 0.022uF | Capacitor_SMD:C_0805_2012Metric | C13, C14 |
| 2 | 1Meg | Resistor_SMD:R_0603_1608Metric | R13, R29 |
| 2 | 1k | Resistor_SMD:R_0603_1608Metric | R15, R21 |
| 2 | 4.7uF | Capacitor_SMD:CP_Elec_10x10 | C5, C25 |
| 2 | AudioJack2 | Connector_Audio:Jack_6.35mm_Neutrik_NRJ4HF_Horizontal | J2, J3 |
| 1 | 0 | Resistor_SMD:R_1210_3225Metric | R34 |
| 1 | 0.100 | Resistor_SMD:R_2512_6332Metric | R11 |
| 1 | 1000pF | Capacitor_SMD:C_0805_2012Metric | C15 |
| 1 | 100pF | Capacitor_THT:C_Rect_L18.0mm_W5.0mm_P15.00mm_FKS3_FKP3 | C19 |
| 1 | 10Meg | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | 10uF | Capacitor_Tantalum_SMD:CP_EIA-6032-28_Kemet-C | C4 |
| 1 | 10uF | Capacitor_SMD:CP_Elec_16x17.5 | C1 |
| 1 | 1meg Audio | Potentiometer_THT:Potentiometer_Piher_T-16H_Single_Horizontal | RV2 |
| 1 | 2200pF | Capacitor_SMD:C_0805_2012Metric | C12 |
| 1 | 220pF | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | 25k Linear | Potentiometer_THT:Potentiometer_Piher_T-16H_Single_Horizontal | RV4 |
| 1 | 27k | Resistor_SMD:R_2512_6332Metric | R12 |
| 1 | 2Meg | Resistor_SMD:R_2512_6332Metric | R8 |
| 1 | 3.3k | Resistor_SMD:R_1206_3216Metric | R6 |
| 1 | 330k | Resistor_SMD:R_1210_3225Metric | R31 |
| 1 | 33k | Resistor_SMD:R_0805_2012Metric | R28 |
| 1 | 4.3k | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 43 | Resistor_SMD:R_0603_1608Metric | R25 |
| 1 | 47k | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 500k Audio | Potentiometer_THT:Potentiometer_Piher_T-16H_Single_Horizontal | RV1 |
| 1 | 500k Linear | Potentiometer_THT:Potentiometer_Piher_T-16H_Single_Horizontal | RV3 |
| 1 | 56uH | lv_amp:pm2110 | L1 |
| 1 | 68k | Resistor_SMD:R_0603_1608Metric | R24 |
| 1 | D | Package_TO_SOT_SMD:TO-263-2_TabPin1 | D1 |
| 1 | Jack-DC | lv_amp:Kobiconn 179PH | J1 |
| 1 | MAX1771xSA | Package_SO:SO-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | N/C Load | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P15.24mm_Horizontal | R35 |
| 1 | Q_NMOS_DGS | Package_TO_SOT_SMD:TO-263-2 | Q1 |
| 1 | TL072 | Package_SO:SO-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | Zener 5.1V | Diode_SMD:D_SOT-23_ANK | D2 |

ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

ctag-fh-kiel/ctag-tbd
CTAG TBD >>to be determined<< an extendible open source Eurorack sound module

plinkysynth/plinky_public
a public release of the plinky sw and hw



matthewcieplak/super-sixteen
Code and schematics for the Super Sixteen Eurorack sequencer

mzuelch/CATs-Eurosynth
Analog Synth Eurorack Modules

StoneRose35/cortexguitarfx
guitar effects processor implemented on various arm cortex platforms
It measures 127 × 76.2 mm and has 2 copper layers, 1.6 mm thick.
89 parts, built around the TL072. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the russellmcc/lv-amp repository on GitHub, at the commit this page was made from: the board is lv_amp.kicad_pcb and its schematic lv_amp.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask russellmcc before reusing the design.