
Pcb pro controller
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

Hellen154vag-9.1 is an open-source printed circuit board by rusefi, from the rusefi/hellen154vag-9.1 repository on GitHub. It is a 2-layer board of 357 × 161.2 mm with 66 parts on 247 nets, routed with 1,816 tracks and 260 vias.
Its parts include 9 resistors, 2 connectors, 2 switches, 2 fuses and 1 capacitor.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 38 | Pad | hellen-one-common:PAD-TH | V10, V11, V12, V13, V14, V17, V20, V28, V40, V41, V43, V44, V45, V46, V48, V49 +22 |
| 5 | Jumper-Pad-Pad | hellen-one-common:PAD-0805-PAD | R2, R3, R4, R8, R9 |
| 2 | Button_SPST | hellen-one-common:SMD-2_2.9x3.9x1.7 | S1, S2 |
| 2 | Fuse-Pad-Pad | hellen-one-common:PAD-1206-PAD | F1, F2 |
| 2 | LOGO | rusefi:LOGO | G?, G? |
| 2 | Res | hellen-one-common:R0603 | R6, R7 |
| 2 | Res_Array_4 | hellen-one-common:R0603-4 | R1, R5 |
| 1 | 368255-2 | hellen121vag:368255-2 | P1 |
| 1 | Cap | hellen-one-common:C0603 | C1 |
| 1 | D_TVS_Array_4 | hellen-one-common:SOT23-6 | D1 |
| 1 | Disclaimer | rusefi:Off_Road_Disclaimer | G? |
| 1 | Module-can-0.1 | hellen-one-can-0.1:can | M1 |
| 1 | Module-ign8-0.1 | hellen-one-ign8-0.1:ign8 | M7 |
| 1 | Module-input-0.1 | hellen-one-input-0.1:input | M4 |
| 1 | Module-knock-0.1 | hellen-one-knock-0.1:knock | M5 |
| 1 | Module-mcu-0.1 | hellen-one-mcu-0.1:mcu | M3 |
| 1 | Module-output-0.1 | hellen-one-output-0.1:output | M6 |
| 1 | Module-power12-0.1 | hellen-one-power12-0.1:power12 | M8 |
| 1 | Module-power5-0.1 | hellen-one-power5-0.1:power5 | M2 |
| 1 | USB_B_Mini | hellen-one-common:USB-MINI-B-VERTICAL | J1 |

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!



famichu/MagLev_Switch_MX
The 3D printable magnetic levitation contactless switch with the linear output hall effect sensor.

mmccoyd/hillside
Family of split ergonomic keyboards with three rows of six or five keys and a generous thumb arc



Ardumower/ardumower
Develop an open source robotic lawn mower (HW+SW reference platform)
It measures 357 × 161.2 mm and has 2 copper layers, 1.6 mm thick.
66 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the rusefi/hellen154vag-9.1 repository on GitHub, at the commit this page was made from: the board is hellen154vag-9.1.kicad_pcb and its schematic Common_Rail_MC33816.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask rusefi before reusing the design.