
OSO SWAT B1
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch

MEGAMIDI MERGE, MEGABOY MIDI
Megamidimerge is an open-source printed circuit board by rusaakkmods, from the rusaakkmods/megamidimerge repository on GitHub, published under the GPL-2.0 licence. It is a 2-layer board with 39 parts on 40 nets.
Its parts include 12 connectors, 10 resistors, 7 capacitors, 6 diodes and 2 ICs. It belongs with the audio and music boards of this library.
This project is designed to merge MIDI input from multiple sources, calculate beats per minute (BPM), and update clock resolution as needed.
Overall, the project has transformed from an initial concept into a sophisticated MIDI merging and clock management device. The integration of effective isolation, filtering, and protection measures—along with clean clock signal generation—has ensured reliable operation and precise MIDI timing. Moving forward, the focus will be on refining timing accuracy, enhancing modularity in the code, and finalizing the design for stability and usability in practical scenarios.
millis() and digitalRead() functions)| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10nF | Capacitor_THT:C_Rect_L7.2mm_W2.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 | C4, C5, C6, C7 |
| 4 | 1N5819 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1, D2, D3, D4 |
| 4 | 220R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R3, R5, R6 |
| 4 | 4.7K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R4, R9, R10 |
| 2 | 0.1uF | Capacitor_THT:C_Rect_L7.2mm_W2.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 | C1, C2 |
| 2 | 10K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R7, R8 |
| 2 | 2N2222 | Package_TO_SOT_THT:TO-92L_Inline_Wide | Q1, Q2 |
| 2 | 5.1V | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D5, D6 |
| 2 | 6N137 | Package_DIP:DIP-8_W7.62mm | U2, U3 |
| 1 | 10uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C3 |
| 1 | CLOCK OUT 1 | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J5 |
| 1 | CLOCK OUT 2 | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J6 |
| 1 | DC | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J13 |
| 1 | LCD | Connector_JST:JST_EH_B4B-EH-A_1x04_P2.50mm_Vertical | J11 |
| 1 | LEFT | Connector_PinHeader_2.54mm:PinHeader_1x12_P2.54mm_Vertical | J8 |
| 1 | MIDI IN 1 | Connector_JST:JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical | J1 |
| 1 | MIDI IN 2 | Connector_JST:JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical | J2 |
| 1 | MIDI OUT 1 | Connector_JST:JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical | J3 |
| 1 | MIDI OUT 2 | Connector_JST:JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical | J4 |
| 1 | RESOLUTION | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J12 |
| 1 | RIGHT | Connector_PinHeader_2.54mm:PinHeader_1x12_P2.54mm_Vertical | J9 |
| 1 | SWITCH MASTER | Connector_JST:JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical | J10 |

joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch

rusefi/rusefi
rusefi - GPL internal combustion engine control unit

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

ataradov/usb-sniffer-lite
A simple USB sniffer based on Raspberry Pi RP2040

windowsair/wireless-esp8266-dap
CMSIS-DAP compatible wireless debugger for ESP8266/ESP32/ESP32C3/ESP32S3. Optional 40MHz SPI acceleration, etc. 适配多种ESP芯片的无线调试器


lachlanA/eagle-to-kicad
Eagle SCH/LIB to KiCad SCH/LIB ULP conversion script

39 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the rusaakkmods/megamidimerge repository on GitHub, at the commit this page was made from: the board is schematics/megamidimerge/megamidimerge.kicad_pcb and its schematic schematics/megamidimerge/megamidimerge.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).