
Exbike usb hw
03vmate/exercisebike-usb-interface
AVR MCU based USB interface for exercise bike

Monitor is an open-source printed circuit board by ruhomor, from the ruhomor/truba-pcb-open repository on GitHub. It is a 2-layer board with 24 parts on 26 nets, routed with 33 tracks and 0 vias.
It is built around the ATTINY24A-SSU, NRF24L01 and DHT11, with the AMS1117-3.3 among its other parts. Its parts include 9 capacitors, 5 resistors and 3 inductors. It belongs with the AVR (ATmega, ATtiny) boards of this library.

| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 10k | Resistor_SMD:R_0201_0603Metric | R3, R4, R5 |
| 2 | 22pF | Capacitor_SMD:C_0201_0603Metric | C5, C6 |
| 1 | 1.5pF | Capacitor_SMD:C_0201_0603Metric | C2 |
| 1 | 10nF | Capacitor_SMD:C_0201_0603Metric | C8 |
| 1 | 16MHz | Crystal:Crystal_AT310_D3.0mm_L10.0mm_Horizontal | Crystal1 |
| 1 | 1M | Resistor_SMD:R_0201_0603Metric | R1 |
| 1 | 1nF | Capacitor_SMD:C_0201_0603Metric | C7 |
| 1 | 1pF | Capacitor_SMD:C_0201_0603Metric | C3 |
| 1 | 2.2nF | Capacitor_SMD:C_0201_0603Metric | C4 |
| 1 | 2.7nH | Inductor_SMD:L_0201_0603Metric | L1 |
| 1 | 22k | Resistor_SMD:R_0201_0603Metric | R2 |
| 1 | 3.9nH | Inductor_SMD:L_0201_0603Metric | L2 |
| 1 | 33nF | Capacitor_SMD:C_0201_0603Metric | C9 |
| 1 | 4.7pF | Capacitor_SMD:C_0201_0603Metric | C1 |
| 1 | 8.2nH | Inductor_SMD:L_0201_0603Metric | L3 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | Converter1 |
| 1 | ATtiny24A-SS | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | MTU1 |
| 1 | DHT11 | Sensor:Aosong_DHT11_5.5x12.0_P2.54mm | DHT11 |
| 1 | GroundHumidity | TestPoint:TestPoint_2Pads_Pitch5.08mm_Drill1.3mm | GroundHumidity1 |
| 1 | NRF24L01 | Package_DFN_QFN:QFN-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mm | Radio1 |
| 1 | R_Photo | Resistor_SMD:R_0201_0603Metric | VT83N1 |

03vmate/exercisebike-usb-interface
AVR MCU based USB interface for exercise bike




Bakirov-Artur/PWR_MIC_LI-ION_module
li-ion 18650 battery(foot print HB-18650-PC4), 1S PCB/PCM(XZD-YH10A-1)



24 parts, built around the ATTINY24A-SSU, NRF24L01, DHT11 and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ruhomor/truba-pcb-open repository on GitHub, at the commit this page was made from: the board is monitor_pcb/monitor.kicad_pcb and its schematic hub_pcb/hub.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask ruhomor before reusing the design.