2 layers1 × 0.6 mm
2 layers75 × 75.1 mm
CanopySense take1
rsk9inner-beep/mints-pcb- Size
- 75 × 75.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 31
- Nets
- 74
- Pads
- 209
- Tracks, vias
- 700, 35
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 13 Feb 2026
- Updated
- 3 Mar 2026
Overview
CanopySense take1 is an open-source printed circuit board by rsk9inner-beep, from the rsk9inner-beep/mints-pcb repository on GitHub. It is a 2-layer board of 75 × 75.1 mm with 31 parts on 74 nets, routed with 700 tracks and 35 vias.
It is built around the BME280, AP2112K-3.3 and 10132328-10011LF, with the BSS138, EEV107M010S9GAA and M20-7830542 among its other parts. Its parts include 9 connectors, 7 capacitors, 7 resistors, 3 ICs and 1 diode.
Main components
9
BME280
LGA-8(2.5x2.5)-40℃~+85℃ 0%RH~100%RH 1.71V~3.6V 1.8uA 16bit I2C、SPI ±0.5℃ ±3%RH LGA-8(2.5x2.5) Temperature and Humidity Sensor ROHSBoschTemperature And Humidity Sensor
AP2112K-3.3
SOT253.3V 600mA CMOS Low Dropout Linear Regulator with EnableDiodes IncorporatedUncategorised
10132328-10011LF
SMD-55℃~+85℃ 1 100V 24P Black Female Surface Mount,Vertical Type-C USB 3.1 SMD USB Connectors ROHSAmphenolUSB Connectors
BSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETs
EEV107M010S9GAA
SMD,D6.3xL5.65mm-55℃~+105℃ 100uF 10V 190mA@100kHz 2000hrs@105℃ 5.65mm 520mΩ@100kHz 6.3mm Polarized ±20% SMD,D6.3xL5.65mm Aluminum Electrolytic Capacitors - SMD ROHSKEMETAluminum Electrolytic Capacitors - SMDM20-7830542
插件,P=2.54mm-40℃~+105℃ 10P 1kV 2 2.54mm 2.54mm 3A 8.51mm Copper alloy Through Hole Tin Top 插件,P=2.54mm Female Headers ROHSHarwinFemale Headers
NK236
插件Slide SwitchesAPEM
RC0603FR-07330RL
UncategorisedUnknown maker
WS2812B-5050RGB
SMD-4_5.0X5.0X4.2PSMD-4_5.0X5.0X4.2P SMT ROHSJLCPCB AssemblyUncategorised
Parts
31| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | Qwiic_Vertical | SparkFun-Connector:JST_1x04_P1.0mm_Vertical_SMD | J2, J4, J6, j9 |
| 3 | 0.1uF | SparkFun-Capacitor:C_0603_1608Metric | C1, C5, C6 |
| 3 | 10k | SparkFun-Resistor:R_Array_Convex_4x0603 | R1, R2, R5 |
| 3 | 10uF | SparkFun-Capacitor:C_0805_2012Metric | C2, C3, C4 |
| 2 | ~ | SparkFun-Jumper:Jumper_2_NO | JP2, JP3 |
| 1 | 10132328-10011LF | 10132328_10011LF:AMPHENOL_10132328-10011LF | J11 |
| 1 | 10k | SparkFun-Resistor:R_0603_1608Metric | R3 |
| 1 | 5.1k | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | 5013310607 | 5013310607:MOLEX_5013310607 | J7 |
| 1 | 679305124022 | 679305124022:679305124022 | J3 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | BME280 | Package_LGA:Bosch_LGA-8_2.5x2.5mm_P0.65mm_ClockwisePinNumbering | U2 |
| 1 | BSS138 | SparkFun-Semiconductor-Standard:SOT-363 | Q1 |
| 1 | EEV107M010S9GAA | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C7 |
| 1 | GPIO | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical | J1 |
| 1 | M20-7830542 | M20_7830542:HARWIN_M20-7830542 | J5 |
| 1 | NK236 | footprints.prettylol:SWITCH_NK236_APM | S1 |
| 1 | RC0603FR-07330RL | RC0603FR_075K1L:RESC1607X60N | R8 |
| 1 | RC0603FR-075K1L | RC0603FR_075K1L:RESC1607X60N | R6 |
| 1 | TGS2611-C00 | TGS2611_clean:TGS2611C00 | IC1 |
| 1 | WS2812B_5050 | SparkFun-LED:WS2812_5050-4Pin | D1 |
More from rsk9inner-beep/mints-pcb
1Similar boards
- 2 layers80 × 80 mm
- 4 layers80 × 80 mm
- 2 layers
Pcbgolf
chilly23/PCBGolf-master-Comma.ai
Compact PCB studies for the comma.ai PCBGolf challenge, including KiCad and EasyEDA designs, BOMs, STEP models, and routing-status reports.
245 partsMIT - 4 layers
Astra Companion
atireksd11/Astra-Companion
This repo holds the carrier PCB, the voice stack on the laptop, and notes for building Astra. Week 1 was the KiCad board.
96 parts - 4 layers27.9 × 57.2 mm
- 4 layers35.5 × 74.5 mm
Room environment monitor
kevinlutzer/room-environment-monitor
An IOT device built of the raspberry pi
57 parts - 8 layers50 × 50 mm
- 4 layers191.5 × 121.8 mm
Foxhunt1
gx1400/kicad_foxhunt_batterytest
Custom amateur radio fox hunt (hidden transmitter) controller, aimed at being a flexible, dynamic platform for a wide range of fox-hunt formats — not just a fixed single-mode beacon.
260 parts
Questions
How big is the CanopySense take1 PCB?
It measures 75 × 75.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the CanopySense take1 use?
31 parts, built around the BME280, AP2112K-3.3, 10132328-10011LF and BSS138. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the CanopySense take1 KiCad files?
From the rsk9inner-beep/mints-pcb repository on GitHub, at the commit this page was made from: the board is canopySense_take1/canopySense_take1.kicad_pcb and its schematic canopySense_take1-backups/canopySense_take1/canopySense_take1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the CanopySense take1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask rsk9inner-beep before reusing the design.