2 layers107.5 × 60 mm
2 layers
Led strip controller esp8266
rschaeuble/led-strip-controller2An LED strip controller driving up to three independent LED strips. Controllable via WiFi + MQTT.
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 24
- Nets
- 45
- Pads
- 148
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 5 (file 20171130)
- Created
- 2 Jun 2018
- Updated
- 1 Jul 2018
Overview
Led strip controller esp8266 is an open-source printed circuit board by rschaeuble, from the rschaeuble/led-strip-controller repository on GitHub, published under the MIT licence. It is a 2-layer board with 24 parts on 45 nets.
It is built around the R-78HB3.3-0.5, PCA9685PW and DMN3018SSD, with the TVS3V3L4U among its other parts. Its parts include 6 transistors, 5 resistors, 4 capacitors, 3 ICs and 3 connectors. It belongs with the lEDs and displays and radio and wireless boards and the ESP8266 boards of this library.
Main components
4
R-78HB3.3-0.5
SIP,11.5x8.5mm-40℃~+85℃ 1 100uF 11.5mm 17.5mm 3.3V 500mA 5mA 60mVp-p 8.5mm 800kHz 82% 9V~72V Short Circuit Protection、Over-temperature protection、Automatic fault recovery Step-down type ±3% SIP,11.5x8.5mm DC-DC Power Modules ROHSRECOM PowerDC-DC Power Modules
PCA9685PW
TSSOP-28-40℃~+85℃ 100kHz~1MHz 16 2.3V~5.5V 25mA 5.5V Built-in PWM TSSOP-28 LED Drivers ROHSNXP SemiconductorsLED Drivers
DMN3018SSD
SO-8-55℃~+150℃ 1.5W 13.2nC@10V 2 N-Channel 2.1V 30V 30mΩ@4.5V 6.7A 67pF 697pF 97pF N-Channel SO-8 MOSFETs ROHSDiodes IncorporatedMOSFETs
TVS3V3L4U
SOT-23-6ESD And Surge Protection (TVS/ESD)TECH PUBLIC
Parts
24| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | DMN3018SSD | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | Q1, Q2, Q3, Q4, Q5, Q6 |
| 4 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.29x1.40mm_HandSolder | R1, R2, R3, R4 |
| 3 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.29x1.40mm_HandSolder | C1, C3, C4 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.29x1.40mm_HandSolder | C2 |
| 1 | 470 | Resistor_SMD:R_0805_2012Metric_Pad1.29x1.40mm_HandSolder | R5 |
| 1 | Barrel_Jack | Connector_BarrelJack:BarrelJack_Horizontal | J3 |
| 1 | Conn_01x05_Female | Connector_PinHeader_1.00mm:PinHeader_1x05_P1.00mm_Vertical | J2 |
| 1 | Conn_01x15_Female | Connector_PinHeader_1.00mm:PinHeader_1x15_P1.00mm_Vertical | J1 |
| 1 | ESP-13-WROOM-02 | ESP8266:ESP-13-WROOM-02 | U1 |
| 1 | LED | LED_SMD:LED_0805_2012Metric | D2 |
| 1 | PCA9685PW | Package_SO:TSSOP-28_4.4x9.7mm_P0.65mm | U2 |
| 1 | R-78HB3.3-0.5 | Converter_DCDC:Converter_DCDC_RECOM_R-78HB-0.5_THT | U3 |
| 1 | TVS3V3L4U | Package_SO:TSOP-6_1.65x3.05mm_P0.95mm | D1 |
| 1 | Test_Point | Connector_Pin:Pin_D1.0mm_L10.0mm | TP1 |
Questions
What parts does the Led strip controller esp8266 use?
24 parts, built around the R-78HB3.3-0.5, PCA9685PW, DMN3018SSD and TVS3V3L4U. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Led strip controller esp8266 KiCad files?
From the rschaeuble/led-strip-controller repository on GitHub, at the commit this page was made from: the board is hardware/led-strip-controller-esp8266/led-strip-controller-esp8266.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Led strip controller esp8266 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers100 × 75 mm
SELDestroyer
HEAPLab/SELDestroyer
The SEL destroyer can be also used as a normal voltage, current, or power monitoring device.
82 partsMIT - 4 layers81.4 × 90 mm
Sensor node
Kaiote-opensource/OpenHAP
A low cost, opensource research tool with remote measurement capability for non invasive monitoring of household air pollution.
127 partsMIT - 2 layers450 × 400 mm
- 4 layers65 × 56 mm
- 2 layers220 × 329.2 mm
Control Boards
nasa-jpl/open-source-rover
A build-it-yourself, 6-wheel rover based on the rovers on Mars!
148 parts9.8kApache-2.0 - 4 layers100.1 × 60.2 mm
Hades
pms67/HadesFCS
Complete flight control system designed from scratch. Hardware designed with KiCad.
215 parts1kBSD-3-Clause - 2 layers94 × 79 mm
