2 layers
Led strip controller esp8266
rschaeuble/led-strip-controller
An LED strip controller driving up to three independent LED strips. Controllable via WiFi + MQTT.
24 parts2MIT
2 layers100 × 75 mm
SELDestroyer
HEAPLab/SELDestroyerThe SEL destroyer can be also used as a normal voltage, current, or power monitoring device.
- Size
- 100 × 75 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 82
- Nets
- 38
- Pads
- 200
- Tracks, vias
- 267, 243
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 27 Apr 2024
- Updated
- 29 May 2024
Overview
SELDestroyer is an open-source printed circuit board by HEAPLab, from the HEAPLab/SELDestroyer repository on GitHub, published under the MIT licence. It is a 2-layer board of 100 × 75 mm with 82 parts on 38 nets, routed with 267 tracks and 243 vias.
It is built around the TLP293(E, TVS3V3L4U and XP231N0201TR-G, with the B120-E3 and SUD50P04-08-VB among its other parts. Its parts include 20 resistors, 17 capacitors, 9 connectors, 8 diodes and 4 ICs. It belongs with the PIC boards of this library.
Main components
5
TLP293(E
SOP-4SOP-4 Transistor, Photovoltaic Output Optoisolators ROHSToshibaTransistor, Photovoltaic Output Optoisolators
TVS3V3L4U
SOT-23-6ESD And Surge Protection (TVS/ESD)TECH PUBLIC
XP231N0201TR-G
SOT-23(TO-236)1 N-channel 1.2pF 1.8V 180pC@10V 200mA 30V 400mW 5Ω@4.5V 6.5pF SOT-23(TO-236) MOSFETs ROHSTorex SemiconductorMOSFETs
B120-E3
DO-214AC(SMA)-65℃~+125℃ 1 Independent 1A 200uA 20V 30A 520mV@1A DO-214AC(SMA) Schottky Diodes ROHSVishay IntertechnologySchottky Diodes
SUD50P04-08-VB
TO-252-2-55℃~+175℃ 1 P-Channel 1.5V 136W 3.95nF 40V 440pF 50A 80nC@10V TO-252-2 MOSFETs ROHSVBsemi ElecMOSFETs
README
README.mdThis README is a WIP.
SEL Destroyer
This repository contains the hardware, firmware and software files of the SEL Destroyer board, which is an electronic device to detect and destroy the Single Event Latches (SELs) happening during SEE testing of electronic components (radiation testing, laser-based testing, etc.).
The SEL destroyer can be also used as a normal voltage, current, or power monitoring device.
Features
...
Repository structure
- The
hardwaredirectory contains the KiCad files- See the hardware readme (WIP)
- The
firmwaredirectory contains the MPLAB X project (XC8 compiler) to program the PIC microcontroller- See the firmware readme (WIP)
- The
softwaredirectory contains the host software (PC-side)- Check the software README
License
MIT license, see the LICENSE file.
Acknowledgments
Parts
82| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C4, C15, C17 |
| 4 | 10n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5, C8, C10, C14 |
| 3 | 33 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9, R10, R11 |
| 3 | TVS_3V3 | Diode_SMD:D_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D4, D6, D7 |
| 2 | 10k (ONLY IF NEEDED) | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R6 |
| 2 | 10u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C7, C16 |
| 2 | 10u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C3 |
| 2 | 1n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6, C11 |
| 2 | 240 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 2 | 30p | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C12, C13 |
| 2 | 330 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R17, R19 |
| 2 | 4k7 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4 |
| 2 | DUT_GND | LocalLibrary:CT3151 | J2, J9 |
| 2 | FerriteBead | Inductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | FB1, FB2 |
| 2 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2, D5 |
| 2 | XP231N0201TR-G | Package_TO_SOT_SMD:SOT-23 | Q2, Q3 |
| 1 | 0 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R20 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8 |
| 1 | 12A | Fuse:Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F1 |
| 1 | 150 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R12 |
| 1 | 160mA | Fuse:Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F2 |
| 1 | 1M | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R14 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7 |
| 1 | 1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C9 |
| 1 | 2k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R16 |
| 1 | 2k, >0.5W | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R13 |
| 1 | 3.6V | Diode_SMD:D_SMB_Handsoldering | D8 |
| 1 | 56 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R18 |
| 1 | 8MHz | Crystal:Crystal_SMD_HC49-SD | Y1 |
| 1 | B120-E3 | Diode_SMD:D_SMA | D3 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_CUI_CPT-9019S-SMT | BZ1 |
| 1 | DELATCHER_GND | LocalLibrary:CT3151 | J7 |
| 1 | DELATCHER_PWR | LocalLibrary:CT3151 | J1 |
| 1 | DUT_PWR_IN | LocalLibrary:CT3151 | J6 |
| 1 | DUT_PWR_OUT | LocalLibrary:CT3151 | J8 |
| 1 | I2C_DISPLAY | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J4 |
| 1 | INA233 | Package_SO:VSSOP-10_3x3mm_P0.5mm | U4 |
| 1 | LD1117S33TR_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | LOGO | LOGO | G*** |
| 1 | LOGO | sel_destroyer:Polimi_Logo | G*** |
| 1 | Link Power 12Vmax | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | Link Power 3V3 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP2 |
| 1 | PIC16F18325-ISL | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U2 |
| 1 | Programmer | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J3 |
| 1 | R_Shunt | Resistor_SMD:R_Shunt_Vishay_WSK2512_6332Metric_T2.21mm | R15 |
| 1 | SERIAL_CONNECTOR | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Horizontal | J5 |
| 1 | SUD50P04-08 | Package_TO_SOT_SMD:TO-252-2 | Q1 |
| 1 | TLP293 | Package_SO:SOIC-4_4.55x2.6mm_P1.27mm | U3 |
| 1 | TP_3V3 | TestPoint:TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | TP1 |
| 1 | TP_GND | TestPoint:TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | TP2 |
| 1 | TVS_15V | Diode_SMD:D_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
The 73 most common of 82 parts.
Questions
How big is the SELDestroyer PCB?
It measures 100 × 75 mm and has 2 copper layers, 1.6 mm thick.
What parts does the SELDestroyer use?
82 parts, built around the TLP293(E, TVS3V3L4U, XP231N0201TR-G and B120-E3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SELDestroyer KiCad files?
From the HEAPLab/SELDestroyer repository on GitHub, at the commit this page was made from: the board is hardware/sel_destroyer.kicad_pcb and its schematic hardware/output_section.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the SELDestroyer design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 4 layers81.4 × 90 mm
Sensor node
Kaiote-opensource/OpenHAP
A low cost, opensource research tool with remote measurement capability for non invasive monitoring of household air pollution.
127 partsMIT - 2 layers450 × 400 mm
- 4 layers65 × 56 mm
- 2 layers100 × 100 mm
Hdmilight v3
esar/hdmilight-v3
HDMI Light v3 - FPGA based Ambilight clone with direct HDMI input
259 parts8GPL-2.0 - 2 layers147 × 92 mm
Van
blinken/vandal
An ESP32-based lighting control system for campervans (or anything else)
227 parts6GPL-3.0 - 2 layers51.1 × 58.7 mm
- 4 layers120 × 103.9 mm
BALANCING CUBEV1.01
Evc-r/Balancing-Cube-STM32
STM32F411CEU6 and ICM-20948 v2 self-balancing cube firmware port and integration plan.
76 parts2