

Snn-4layers
PCB for a spiking neuron
- Size
- 66.3 × 43.2 mm
- Copper layers
- 4
- Thickness
- 3.98 mm
- Parts
- 78
- Nets
- 74
- Pads
- 325
- Tracks, vias
- 599, 41
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 17 Sep 2022
- Updated
- 17 Sep 2022
Overview
Snn-4layers is an open-source printed circuit board by RoyceRichmond, from the RoyceRichmond/4layers-snn repository on GitHub. It is a 4-layer board of 66.3 × 43.2 mm with 78 parts on 74 nets, routed with 599 tracks and 41 vias.
It is built around the ALD1106PBL, ALD1107PBL and AP7366-W5, with the LT1715HMS and LT3015EDD-2.5#PBF among its other parts. Its parts include 22 ICs, 20 capacitors, 10 resistors and 2 connectors.
Main components
5ALD1106PBL
PDIP-140℃~+70℃ 10V 1V 3pF 4 N-Channel 500mW 500Ω@5V N-Channel PDIP-14 MOSFETs ROHSAdvanced Linear DevicesMOSFETsALD1107PBL
PDIP-140℃~+70℃ 1.2V 1.8kΩ@5V 10V 3pF 4 P-Channel 500mW P-Channel PDIP-14 MOSFETs ROHSAdvanced Linear DevicesMOSFETsAP7366-W5
SOT-25-40℃~+85℃@(Ta) 1 300mV@(600mA) 600mA 60uA 6V 75dB@(1kHz) 800mV~5V Adjustable Over Current Protection、Short Circuit Protection、Thermal Shutdown Positive SOT-25 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDiodes IncorporatedVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsLT1715HMS
MSOP104ns, 150MHz Dual Comparator with Independent Input/Output SuppliesAnalog DevicesUncategorisedLT3015EDD-2.5#PBF
DFN-8-EP(3x3)-40℃~+125℃@(Tj) 1 1.1mA 1.5A 2.5V 30V 310mV 60uVrms 62dB@(120Hz) Fixed Negative Under Voltage Lockout、Over Current Protection、Over Temperature Protection DFN-8-EP(3x3) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAnalog DevicesVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Parts
78| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | TestPoint | TestPoint:TestPoint_Pad_D1.5mm | -2.5v1, 2.5v1, D_phi1, Gnd_a1, phi_fire1, phi_int1, Vcomp_sw1, Vcomp1, Vmem1, Vrefr1, Vthcomp1 |
| 9 | ADG619 | Package_TO_SOT_SMD:SOT-23-8 | U9, U11, U12, U15, U16, U17, U18, U19, U20 |
| 6 | 100n | Capacitor_SMD:C_0402_1005Metric | C15, C16, C17, C18, C19, C20 |
| 4 | Jumper_2_Bridged | TestPoint:TestPoint_2Pads_Pitch2.54mm_Drill0.8mm | JP1, JP2, JP3, JP4 |
| 3 | 10k | Resistor_SMD:R_0402_1005Metric | R3, R6, R10 |
| 3 | 10uf | Capacitor_SMD:C_0603_1608Metric | C11, C12, C14 |
| 3 | ALD1106 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U1, U6, U8 |
| 3 | ALD1107 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U4, U5, U7 |
| 3 | Jumper_3_Bridged12 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP7, JP8, JP9 |
| 2 | 0.1u | Capacitor_SMD:C_0402_1005Metric | C1, C2 |
| 2 | 1u | Capacitor_SMD:C_0603_1608Metric | C7, C8 |
| 2 | 4.7k | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 2 | 500k | Resistor_SMD:R_0402_1005Metric | R7, R8 |
| 2 | LM555xM | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2, U3 |
| 2 | SolderJumper_3_Bridged12 | Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm | JP5, JP6 |
| 1 | 0.03u | Capacitor_SMD:C_0402_1005Metric | C3 |
| 1 | 0.25u | Capacitor_SMD:C_0402_1005Metric | C4 |
| 1 | 100k | Potentiometer_THT:Potentiometer_Bourns_3296Y_Vertical | RV2 |
| 1 | 109k | Resistor_SMD:R_0402_1005Metric | R5 |
| 1 | 10p | Capacitor_SMD:C_0402_1005Metric | C6 |
| 1 | 1M | Resistor_SMD:R_0402_1005Metric | R4 |
| 1 | 1n | Capacitor_SMD:C_0402_1005Metric | C5 |
| 1 | 20k | Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical | RV1 |
| 1 | 20n | Capacitor_SMD:C_0402_1005Metric | C9 |
| 1 | 22uf | Capacitor_SMD:C_0603_1608Metric | C13 |
| 1 | 330 | Resistor_SMD:R_0402_1005Metric | R9 |
| 1 | 500k | Potentiometer_THT:Potentiometer_Bourns_3296Y_Vertical | RV4 |
| 1 | 500p | Capacitor_SMD:C_0402_1005Metric | C10 |
| 1 | 5k | Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical | RV3 |
| 1 | AP1117Y25G | Package_TO_SOT_SMD:SOT-89-3 | U21 |
| 1 | AP7366 | Package_TO_SOT_SMD:SOT-23-5 | U10 |
| 1 | Input connector | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Horizontal | J2 |
| 1 | LT1715 | Package_SO:MSOP-10-1EP_3x3mm_P0.5mm_EP1.68x1.88mm | U14 |
| 1 | LT3015EDD-2.5 | Package_DFN_QFN:DFN-8-1EP_3x3mm_P0.5mm_EP1.65x2.38mm | U22 |
| 1 | LTC6268xS8-10 | Package_SO:SO-8_3.9x4.9mm_P1.27mm | U13 |
| 1 | Output connector | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
Similar boards
- 2 layers105 × 75 mm

- 2 layers115.8 × 98.6 mm

- 4 layers130 × 130 mm

- 4 layers49.8 × 36 mm

- 4 layers160 × 100 mm

Rosco m68k
rosco-m68k/rosco_m68k
Design, documentation and software for the Really Old School Computer (M68K)
78 parts200 - 4 layers69 × 64 mm

- 4 layers96 × 28 mm

- 4 layers100 × 100 mm

Questions
How big is the Snn-4layers PCB?
It measures 66.3 × 43.2 mm and has 4 copper layers, 3.98 mm thick.
What parts does the Snn-4layers use?
78 parts, built around the ALD1106PBL, ALD1107PBL, AP7366-W5 and LT1715HMS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Snn-4layers KiCad files?
From the RoyceRichmond/4layers-snn repository on GitHub, at the commit this page was made from: the board is Snn-4layers.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Snn-4layers design in my own project?
Its repository states no licence, so its author keeps all rights: ask RoyceRichmond before reusing the design.