

Controller
- Size
- 48 × 30 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 43
- Nets
- 47
- Pads
- 128
- Tracks, vias
- 211, 39
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 7 Aug 2026
- Updated
- 24 Sep 2026
Overview
Controller is an open-source printed circuit board by roy-rishi, from the roy-rishi/lithophane-lightbox repository on GitHub. It is a 2-layer board of 48 × 30 mm with 43 parts on 47 nets, routed with 211 tracks and 39 vias.
It is built around the ESP32-S3-WROOM-1-N16R8, AMS1117-3.3 and SN74LVC1T45DBVRE4, with the USBLC6-2SC6, CL21B104KBCNNNC and FRC0805F1002TS among its other parts. Its parts include 6 capacitors, 6 resistors, 4 ICs, 3 switches and 2 diodes. It belongs with the ESP32 boards of this library.
Main components
12ESP32-S3-WROOM-1-N16R8
SMD,25.5x18mm-103.5dBm -40℃~+65℃ 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA ESP32-S3R8 On-board PCB Antenna UART、SPI、I2C、GPIO、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsSN74LVC1T45DBVRE4
SOT-23-6-40℃~+85℃ 1 1.65V~5.5V 1.65V~5.5V Bidirectional Level translator Power-off protection、Output enable high-impedance Push-Pull、Tri-State SOT-23-6 Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level ShiftersUSBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)CL21B104KBCNNNC
0805100nF 50V X7R ±10% 0805 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSSamsung Electro-MechanicsMultilayer Ceramic Capacitors MLCC - SMD/SMTFRC0805F1002TS
0805-55℃~+155℃ 10kΩ 125mW 150V Thick Film Resistor ±1% ±100ppm/℃ 0805 Chip Resistor - Surface Mount ROHSFOJANChip Resistor - Surface MountTS-1088-AR02016
SMD,4x3mm-30℃~+80℃ 1.6N 100,000 cycles 12V 2mm 3.9mm 3mm 50mA Black Round Button SMD(SMT) Tab SPST Surface Mount,Vertical Without Bracket SMD,4x3mm Tactile Switches ROHSXUNPUTactile SwitchesCL21A106KAYNNNE
080510uF 25V X5R ±10% 0805 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSSamsung Electro-MechanicsMultilayer Ceramic Capacitors MLCC - SMD/SMTCL21B105KBFNNNE
08051uF 50V X7R ±10% 0805 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSSamsung Electro-MechanicsMultilayer Ceramic Capacitors MLCC - SMD/SMTGRM21BR61E226ME44L
080522uF 25V X5R ±20% 0805 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSMurataMultilayer Ceramic Capacitors MLCC - SMD/SMTARG05FTC0500
0805-55℃~+155℃ 125mW 150V 50Ω Thin Film Resistor ±1% ±25ppm/℃ 0805 Chip Resistor - Surface Mount ROHSViking TechChip Resistor - Surface MountB3B-XH-A(LF)(SN)
插件,P=2.5mm-25℃~+85℃ 1 1x3P 2.5mm 250V 3 3A 3P 5.75mm 7mm 9.9mm Brass K Pin PA66 Through Hole Tin UL94V-0 White XH 插件,P=2.5mm Wire To Board Connector ROHSJSTWire To Board Connector
README
README.mdLithophane Lightbox
Parts
43| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | TestPoint | TestPoint:TestPoint_Pad_D1.5mm | IO4, IO5, IO6, IO7, IO15, IO16, IO17, IO38, IO39, IO40, IO41, IO42, LED_TP1, RXD0, TXD0 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad_TopOnly | H1, H2, H3, H4 |
| 3 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C4, C5, C7 |
| 3 | 10kΩ | Resistor_SMD:R_0805_2012Metric | R1, R4, R5 |
| 3 | SW | Button_Switch_SMD:SW_SPST_TS-1088-xR020 | SW1, SW2, SW3 |
| 2 | 5.1kΩ | Resistor_SMD:R_0805_2012Metric | R2, R3 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C9 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | 22uF | Capacitor_SMD:C_0805_2012Metric | C3 |
| 1 | 50Ω | Resistor_SMD:R_0805_2012Metric | R6 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | PRGM1 |
| 1 | Conn_01x03 | Connector_JST:JST_XH_B3B-XH-AM_1x03_P2.50mm_Vertical | LEDS1 |
| 1 | ESP32-S3-WROOM-1 | RF_Module:ESP32-S3-WROOM-1 | U1 |
| 1 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2 |
| 1 | SMAJ5.0CA | Diode_SMD:D_SMA | D1 |
| 1 | SN74LVC1T45DBV | Package_TO_SOT_SMD:SOT-23-6_Handsoldering | U3 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6_Handsoldering | U4 |
| 1 | USB_C_Receptacle_PowerOnly_6P | usb-c:usb-c-vertical-smd | J2 |
More from roy-rishi/lithophane-lightbox
1- 2 layers127 × 82 mm

Similar boards
- 4 layers62 × 50 mm

Battery monitor rev a
bogdan-kovalchuk/esp32-battery-charging-monitoring
An ESP32-based 12 V battery voltage monitor. The firmware measures battery voltage, while a Flask backend delivers notifications to a Signal group through signal-cli.
66 partsMIT - 6 layers240 × 207 mm

- 2 layers60 × 111.3 mm

Silkscreen pcb
iandchasse/silkscreen-pcb
Silkscreen: open-hardware ESP32-S3 e-paper reader mainboard (KiCad 9). Formerly the de-link hub.
189 parts589CERN-OHL-S-2.0 - 2 layers68 × 42 mm

- 2 layers94.9 × 69 mm

ECU
rivotmotors-rnd/ECU_Firmware_V3
RIVOT ECU V3.0 Repo containing STM32F446RE firmware and KiCad PCB hardware designs.
115 parts - 2 layers50 × 50 mm

Starter
vaknin/PCB
Hardware ideas to fab-ready PCBs as code: Rust pcbgen on KiCad 10, Freerouting, ESP-IDF firmware with QEMU/Wokwi simulation, CadQuery enclosures
37 parts - 4 layers100 × 106 mm

Delivery robot 1
ECE49022Team22/delivery-robot-pcb
Delivery robot KiCad PCB project and reusable 3.3 V LDO module
181 parts - 4 layers100 × 120 mm

Micromouse pcb
MukeshSethy/micromouse-runner
This is my repo for the first version of full size micromouse development.
184 parts
Questions
How big is the Controller PCB?
It measures 48 × 30 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Controller use?
43 parts, built around the ESP32-S3-WROOM-1-N16R8, AMS1117-3.3, SN74LVC1T45DBVRE4 and USBLC6-2SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Controller KiCad files?
From the roy-rishi/lithophane-lightbox repository on GitHub, at the commit this page was made from: the board is ecad/controller/controller.kicad_pcb and its schematic ecad/controller/controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Controller design in my own project?
Its repository states no licence, so its author keeps all rights: ask roy-rishi before reusing the design.