

ATF15xxProgBoard
Hardware & firmware for the ATF150x programmer board
- Size
- 71.1 × 96.2 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 42
- Nets
- 120
- Pads
- 369
- Tracks, vias
- 1,745, 183
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 12 Apr 2024
- Updated
- 12 Jul 2025
Overview
ATF15xxProgBoard is an open-source printed circuit board by roscopeco, from the roscopeco/atfprog-hardware repository on GitHub, published under the GPL-2.0 licence. It is a 4-layer board of 71.1 × 96.2 mm with 42 parts on 120 nets, routed with 1,745 tracks and 183 vias.
It is built around the ATMEGA32U4-AU and MT3540. Its parts include 11 capacitors, 11 resistors, 7 connectors, 5 ICs and 4 diodes. It belongs with the AVR (ATmega, ATtiny) and FPGA and CPLD boards of this library.
Main components
2ATMEGA32U4-AU
QFP-44(10x10)-40℃~+85℃ 10bit 16MHz 1KB 2.5KB 2.7V~5.5V 26 32KB 8 Bit AVR Built-in FLASH QFP-44(10x10) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)MT3540
SOT-23-5-40℃~+85℃ 1 1.2MHz 1.5A 2.5V~5.5V 40uA Adjustable Boost Boost Built-in No SOT-23-5 DC-DC Converters ROHSXI'AN Aerosemi TechDC-DC Converters
README
README.mdATF150x programmer (commercial)
Made non-proprietary and released to open-source with the licenses outlined in LICENSE.md and LICENSE.hardware, under my authority on April 23rd 2025.
Ross Bamford
Managing Director
The Really Old-School Company Limited
Parts
42| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C4, C5 |
| 3 | 10u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C6 |
| 3 | 2K | Resistor_SMD:R_0603_1608Metric | R1, R3, R9 |
| 2 | 22R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6, R7 |
| 2 | 22p | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C7, C8 |
| 2 | 4.7u | Capacitor_SMD:C_0603_1608Metric | C10, C11 |
| 2 | 5.1K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R5 |
| 2 | Conn_02x16_Counter_Clockwise | Connector_PinHeader_2.54mm:PinHeader_2x16_P2.54mm_Vertical | J6, J7 |
| 1 | 100K | Resistor_SMD:R_0603_1608Metric | R10 |
| 1 | 10K | Resistor_SMD:R_0603_1608Metric | R11 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8 |
| 1 | 1N4148 | Diode_SMD:D_SOD-123 | D1 |
| 1 | 1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C9 |
| 1 | 2.2K | Resistor_SMD:R_0603_1608Metric | R12 |
| 1 | 4.7uH | Inductor_SMD:L_0805_2012Metric_Pad1.05x1.20mm_HandSolder | L1 |
| 1 | 8MHz | Crystal:Crystal_SMD_5032-2Pin_5.0x3.2mm_HandSoldering | Y1 |
| 1 | AP2127K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U5 |
| 1 | ATmega32U4-AU | Package_QFP:TQFP-44_10x10mm_P0.8mm | U3 |
| 1 | Conn_02x03_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J8 |
| 1 | Conn_02x03_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J10 |
| 1 | Conn_02x05_Odd_Even | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | J1 |
| 1 | Conn_02x07_Odd_Even | Connector_IDC:IDC-Header_2x07_P2.54mm_Vertical | J2 |
| 1 | GREEN | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | LED2 |
| 1 | Jumper_2_Bridged | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | MT3540 | Package_TO_SOT_SMD:SOT-23-5 | U4 |
| 1 | ORANGE | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | LED3 |
| 1 | RED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | LED1 |
| 1 | USB_C | Connector_USB:USB_C_Receptacle_Palconn_UTC16-G | J9 |
| 1 | Voltage | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP2 |
| 1 | ~ | Package_LCC:PLCC-44_THT-Socket | U1 |
| 1 | ~ | Package_LCC:PLCC-84_THT-Socket | U2 |
Similar boards
- 4 layers88 × 58 mm

- 2 layers58.8 × 60.2 mm

- 2 layers65 × 56 mm

- 4 layers85 × 85 mm

Rprp STmpu devB qY-7F
gorougd/qY7F
MPU based on STM32MP157 512MB / 4Gbit DDR3L single bank (routed on PCB)
164 parts - 2 layers32 × 30 mm

Badapple006
cnlohr/cnhardware
My dumping grounds for all my kicad projects and random hardware bringup.
37 parts114 - 2 layers243.2 × 106 mm

- 2 layers228.4 × 85 mm

LeChiffre
tominabox1/Le-Chiffre-Keyboard
Great thanks goes to Jake at P3D for really making the case amazing and open sourcing his work. Check him out at P3Dstore.com
105 parts183GPL-3.0 - 2 layers228.6 × 76.8 mm

Schwann Rev0.5b
The-Royal/The_Royal_Open-Source-Projects
A Master Repository For All things Royal Made
127 parts159MIT
Questions
How big is the ATF15xxProgBoard PCB?
It measures 71.1 × 96.2 mm and has 4 copper layers, 1.6 mm thick.
What parts does the ATF15xxProgBoard use?
42 parts, built around the ATMEGA32U4-AU and MT3540. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ATF15xxProgBoard KiCad files?
From the roscopeco/atfprog-hardware repository on GitHub, at the commit this page was made from: the board is ATF15xxProgBoard/ATF15xxProgBoard.kicad_pcb and its schematic ATF15xxProgBoard/ATF15xxProgBoard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ATF15xxProgBoard design in my own project?
Its repository publishes it under the GPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).