2 layers65 × 50.1 mm
2 layers80 × 21.7 mm
Cablebot power
romi/romi-cablebot4- Size
- 80 × 21.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 17
- Nets
- 6
- Pads
- 27
- Tracks, vias
- 38, 0
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 20 Oct 2020
- Updated
- 3 Nov 2025
Overview
Cablebot power is an open-source printed circuit board by romi, from the romi/romi-cablebot repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 80 × 21.7 mm with 17 parts on 6 nets, routed with 38 tracks and 0 vias.
Its parts include 6 connectors, 3 ICs, 2 fuses, 1 resistor and 1 diode.
README
README.mdParts
17| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2 |
| 2 | OUTPUT | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-3.5-H_1x02_P3.50mm_Horizontal | J4, J5 |
| 1 | 1kΩ | fab:fab-R1206FAB | R1 |
| 1 | BATTERY | TerminalBlock:TerminalBlock_Altech_AK300-2_P5.00mm | J1 |
| 1 | CAMERA MODULE | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-3.5-H_1x02_P3.50mm_Horizontal | J6 |
| 1 | CHARGING_STATION | TerminalBlock:TerminalBlock_Altech_AK300-2_P5.00mm | J3 |
| 1 | Fuse | Fuse:Fuseholder_Littelfuse_Nano2_154x | F1 |
| 1 | Fuse | fab:GENERIC_4010_10228 | F2 |
| 1 | Logo_Open_Hardware_Small | Symbol:OSHW-Logo2_7.3x6mm_SilkScreen | OSH1 |
| 1 | OKI-78SR-5_1.5-W36-C | Converter_DCDC:Converter_DCDC_Murata_OKI-78SR_Horizontal | U1 |
| 1 | POWER_ODRIVE | TerminalBlock:TerminalBlock_Altech_AK300-2_P5.00mm | J2 |
| 1 | RED | fab:fab-LED1206FAB | D1 |
| 1 | SW_SPDT | TerminalBlock:TerminalBlock_Altech_AK300-2_P5.00mm | SW1 |
| 1 | fablab | logos:ROMI_LOGO | U3 |
| 1 | fablab | logos:fablab | U2 |
Questions
How big is the Cablebot power PCB?
It measures 80 × 21.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Cablebot power use?
17 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Cablebot power KiCad files?
From the romi/romi-cablebot repository on GitHub, at the commit this page was made from: the board is Hardware/Electronics/cablebot_power/cablebot_power.kicad_pcb and its schematic Hardware/Electronics/cablebot_controller/cablebot_controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Cablebot power design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from romi/romi-cablebot
2- 2 layers95.1 × 38.5 mm
Similar boards
- 2 layers50 × 35 mm
- 2 layers139.7 × 62.2 mm
- 2 layers29.2 × 55.9 mm
Deniseadapter
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
17 parts1kGPL-3.0 - 2 layers24.5 × 36.5 mm
- 2 layers56.3 × 55.7 mm
StarNecklace
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
17 parts915 - 2 layers25 × 25 mm
SmallEncoder
DDeGonge/OS-ARM
This arm is not industrial and it will not be fast, but that is not my goal. But it will hopefully be a very nice looking arm fully capable of 6dof motion, cheap enough to keep it accessable but capable enough to…
17 parts498MIT - 2 layers38.9 × 16.1 mm
- 2 layers36 × 51 mm
