

Main ext
Кружок робототехники RoboWay
- Size
- 155 × 93 mm
- Copper layers
- 4
- Thickness
- 1.61 mm
- Parts
- 182
- Nets
- 158
- Pads
- 602
- Tracks, vias
- 1,585, 464
- Pours
- 7
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 11 May 2025
- Updated
- 26 Oct 2026
Overview
Main ext is an open-source printed circuit board by roman-khvatov, from the roman-khvatov/RoboWay repository on GitHub, published under the MIT licence. It is a 4-layer board of 155 × 93 mm with 182 parts on 158 nets, routed with 1,585 tracks and 464 vias.
It is built around the SP485EEN-L/TR, CD74HCT4051M96 and 74HC594D, with the SIWG917Y121MGABAR, SN74LVC1G14DBV and TXU0102QDCURQ1 among its other parts. Its parts include 62 resistors, 44 capacitors, 18 diodes, 15 connectors and 12 ICs.
Main components
12SP485EEN-L/TR
SOIC-8-40℃~+85℃ 1 1 10Mbps 4.75V~5.25V 900uA Half-Duplex Transceiver ±15kV SOIC-8 RS-485 / RS-422 ICs ROHSMaxLinearRS-485 / RS-422 ICsCD74HCT4051M96
SOP-16-55℃~+125℃ 19ns 19ns 240Ω 4.5V~5.5V 45ns 8:1 SOP-16 Analog Switches, Multiplexers ROHSTexas InstrumentsAnalog Switches, Multiplexers74HC594D
SOP-16SOP-16 Shift Registers ROHSMDDShift RegistersSIWG917Y121MGABAR
-- Lack of specifications ROHSSilicon LabsUncategorisedSN74LVC1G14DBV
SOT-23-5-40℃~+85℃ 1 1 1.16V~3.33V 1.65V~5.5V 10uA 2.3V 32mA 32mA 390mV~1.87V 550mV 6.5ns@2.5V,50pF 74LVC Schmitt trigger 电源关断保护、噪声抑制功能 SOT-23-5 Inverters ROHSTexas InstrumentsInvertersTXU0102QDCURQ1
VSSOP-8-40℃~+125℃ 1 1.08V~5.5V 1.08V~5.5V 2 200Mbps Level translator Power-off protection、Output enable high-impedance SPI、JTAG、UART Tri-State Unidirectional VSSOP-8 Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level ShiftersES3A
SMB-55℃~+150℃ 35ns 3A 5.9uA 50V 80A 950mV@3A SMB Fast Recovery / High Efficiency Diodes ROHSBORNFast Recovery / High Efficiency DiodesMMBZ5V6A
SOT-23-55℃~+150℃ 24W 3A 3V 5.6V 5uA 8V TVS Unidirectional SOT-23 ESD and Surge Protection (TVS/ESD) ROHSShikuesESD And Surge Protection (TVS/ESD)FDS9926A
SOP-81.5W 112pF 142pF 17nC@4.5V 2 N-Channel 20V 22mΩ@4.5V、30mΩ@2.5V 6A 700mV 850pF N-Channel SOP-8 MOSFETs ROHSJSMSEMIMOSFETsXRTC322512S100MBCA
121010uH 2.2A 2.3A 210mΩ ±20% 一体成型电感 1210 Molding Power Inductors ROHSXRPower InductorsBC817
SOT-231 NPN 100nA 150MHz 300mW 40 45V 500mA 5V 700mV NPN SOT-23 Bipolar (BJT) ROHSShikuesBipolar (BJT)SIT1552AI-JE-DCC-32.768D
SMD1508-4P-40℃~+85℃ 1.52uA 1.5V~3.63V 32.768kHz LVCMOS ±5ppm SMD1508-4P Programmable Oscillators ROHSSiTimeProgrammable Oscillators
README
README.mdЧто такое RoboWay
Мы запускаем образовательный кружок робототехники RoboWay для подростков в возрасте от 12 до 18 лет (возможны исключения в зависимости от подготовки ребенка). Цель кружка — дать учащимся фундаментальные знания в области электроники, программирования и робототехники.
В отличие от большинства кружков, где используются готовые наборы и работа сводится к сборке по инструкции, в RoboWay участники будут разрабатывать и изготавливать роботов с нуля. Мы стремимся к тому, чтобы дети осознанно подходили к техническому творчеству и понимали принципы работы систем, а не просто следовали пошаговым руководствам. Мы убеждены, что инженерия — это не магия, и не “книга заклинаний”, а область, которую можно и нужно понимать.
Обучение будет проходить поэтапно, с учетом уровня подготовки каждого участника. Начнем с простых проектов и постепенно перейдём к более сложным задачам, включая создание собственных роботов.
Формат занятий:
- Место проведения: Южный Дублин (D18 K7TK)
- Частота: 1 раз в неделю по выходным (возможны альтернативные дни по согласованию)
- Стоимость: 25 евро за занятие
Дополнительная информация:
- Большинство проектов будет собираться в единственном экземпляре и храниться в кружке.
- Некоторые комплектующие закупаются с избытком по техническим причинам. Участники смогут выкупить излишки для домашнего повторения проекта по цене 10% от закупочной стоимости (в порядке очереди).
- Мы также готовы помочь в приобретении остальных деталей для самостоятельной сборки.
Период проведения:
- Основной цикл занятий планируется с сентября по май (в течение учебного года).
- При достаточном количестве желающих возможен старт летней программы, а также проведение летней школы
Если Вы хотите заниматься у нас - заполните пожалуйста анкету
У нас так же есть Telegram канал
Другие документы и описания
Parts
182| Qty | Value | Footprint | References |
|---|---|---|---|
| 22 | 100 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R23, R24, R25, R26, R27, R28, R29, R34, R50, R51, R52, R53, R54, R55, R56, R57 +6 |
| 15 | 1.0 | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C3, C5, C9, C28, C30, C34, C35, C37, C38, C39, C40, C41, C42 |
| 9 | TestPoint | TestPoint:TestPoint_Pad_1.0x1.0mm | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8, TP9 |
| 8 | 100K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R5, R6, R7, R8, R38 |
| 8 | ES3A | Diode_SMD:D_SMC | D3, D4, D5, D6, D7, D8, D9, D10 |
| 8 | MMBZ5V6 | Package_TO_SOT_SMD:SOT-23 | D11, D12, D13, D14, D15, D16, D17, D18 |
| 7 | 1K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R39, R44, R45, R46, R47, R48, R49 |
| 7 | HSensor | easyeda2kicad:CONN-TH_DB301R-3.5-3P-GN-S | J11, J12, J13, J14, J15, J16, J17 |
| 6 | 22.0 | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C13, C14, C16, C20, C21, C26 |
| 4 | 100 | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C27, C44, C46, C47 |
| 4 | 10n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C8, C11, C18, C24 |
| 4 | 510 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R21, R22, R41, R42 |
| 4 | FDS9926A | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | Q1, Q2, Q3, Q4 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 10.0 | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C15, C22, C43 |
| 3 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C10, C17, C23 |
| 3 | 10K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R32, R33 |
| 3 | 22K1 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R12, R15, R18 |
| 3 | 45K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R10, R13, R16 |
| 3 | AP64352SP-13 | locals:SO-8_L4.9-W3.9-P1.27-LS6.0-BL-EP | U2, U3, U4 |
| 3 | NP | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C12, C19, C25 |
| 3 | SW_Push | locals:KEY-TH_2P-L6.0-W3.5-P6.50 | SW1, SW2, SW3 |
| 3 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP2, JP3, JP4 |
| 3 | XRTC322512S100MBCA | locals:L_1210_XRTC | L1, L2, L3 |
| 2 | 2.2 | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C29, C36 |
| 2 | 200K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R20, R30 |
| 2 | 2M | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R35, R40 |
| 2 | CD74HCT4051M96 | easyeda2kicad:SOP-16_L10.0-W3.9-P1.27-LS6.0-BL | U12, U13 |
| 2 | LED | LED_THT:LED_D5.0mm | D1, D2 |
| 1 | 0.1 | Resistor_SMD:R_Shunt_Vishay_WSK2512_6332Metric_T2.21mm | R31 |
| 1 | 1000 | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C45 |
| 1 | 100pF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C6 |
| 1 | 10K5 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R36 |
| 1 | 120 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R43 |
| 1 | 18pF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4 |
| 1 | 1n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C7 |
| 1 | 226K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R14 |
| 1 | 2K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R37 |
| 1 | 309K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R11 |
| 1 | 33 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R19 |
| 1 | 69K8 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R17 |
| 1 | 74HC594 | easyeda2kicad:SOIC-16_L9.9-W3.9-P1.27-LS6.0-BL | U7 |
| 1 | AP2204R-5.0 | Package_TO_SOT_SMD:SOT-89-3 | U6 |
| 1 | BC817 | Package_TO_SOT_SMD:SOT-23 | Q7 |
| 1 | Balance | Connector_JST:JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | J3 |
| 1 | Battery | locals:pins4x10 | J2 |
| 1 | Conn_01x08_Pin | locals:CONN-TH_8P-P2.50_XAD-8AS | J6 |
| 1 | DE9_Receptacle | easyeda2kicad:DB9-TH_LD09P33E4GV00LF | J4 |
| 1 | Ext | locals:CONN-TH_DB301R-3.5-4P-GN-S | J10 |
| 1 | INA180A2 | Package_TO_SOT_SMD:SOT-23-5_HandSoldering | U9 |
| 1 | Leak | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J9 |
| 1 | Motor_DC | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | M1 |
| 1 | PROG/JTAG | locals:PinHeader_2x06_P2.54mm_VerticalAB | J1 |
| 1 | SIT1552AI-JE-DCC-32.768D | easyeda2kicad:OSC-SMD_4P-L1.5-W0.8-BL | X1 |
| 1 | SIWG917Y121MGABAR | locals:COMM-SMD_SIWG917Y110LGNBA | U1 |
| 1 | SN74LVC1G14DBV | Package_TO_SOT_SMD:SOT-23-5_HandSoldering | U14 |
| 1 | SP485EEN-L/TR | easyeda2kicad:SOIC-8_L5.0-W4.0-P1.27-LS6.0-BL | U10 |
| 1 | Si2301 | Package_TO_SOT_SMD:SOT-23 | Q6 |
| 1 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged2Bar_RoundedPad1.0x1.5mm | JP1 |
| 1 | TXU0102QDCURQ1 | easyeda2kicad:VSSOP-8_L2.3-W2.0-P0.50-LS3.1-BL | U11 |
| 1 | WaterLevel | Connector_JST:JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | J18 |
More from roman-khvatov/RoboWay
12- 2 layers130 × 156 mm

- 4 layers135 × 85 mm

- 2 layers

- 2 layers

- 4 layers33 × 91.7 mm

- 2 layers73 × 50 mm

- 2 layers27.3 × 59.7 mm

- 2 layers117 × 78 mm

- 2 layers40 × 122 mm

- 2 layers22.9 × 33.7 mm

- 2 layers25.4 × 34.3 mm

- 2 layers37 × 106 mm

Similar boards
- 4 layers13.6 × 19.4 mm

- 2 layers31.3 × 21.3 mm

Esp32 i2c
usnistgov/UAS-6.0-First-Responder-UAS-Wireless-Data-Gatherer-Challenge
UAS 6.0 First Responder UAS Wireless Data Gatherer Challenge
32 parts2 - 4 layers22 × 60.5 mm

Stor
JBlitzar/stor
A USB2.0 High Speed flash drive with a hotswappable MicroSD backend.
65 partsGPL-3.0 - 4 layers33 × 46.4 mm

- 4 layers300 × 120 mm

Iv pulse mux
Brunner-neutrino-lab/ets-breakout
This repository contains the complete design files for a 96-channel I-V curve pulse multiplexer used in detector physics instrumentation.
445 parts - 2 layers

- 2 layers100 × 100 mm

Hydromisc
hydromisc/hydromisc
Open hardware to measure EC and pH, drive pumps, and otherwise manage a mid-size hydroponic grow over Wi-Fi.
179 parts526 - 2 layers

Questions
How big is the Main ext PCB?
It measures 155 × 93 mm and has 4 copper layers, 1.61 mm thick.
What parts does the Main ext use?
182 parts, built around the SP485EEN-L/TR, CD74HCT4051M96, 74HC594D and SIWG917Y121MGABAR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Main ext KiCad files?
From the roman-khvatov/RoboWay repository on GitHub, at the commit this page was made from: the board is WPlant/sch/main-ext/main-ext.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Main ext design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).