2 layers57.9 × 83.9 mm
KEY2USB
acwright/KEY2USB
Commodore 64 / C128 expansion port cartridge to USB HID keyboard
23 parts4CERN-OHL-P-2.0
2 layers100 × 52.5 mm
Ac onoff controller
RollMan/ac_onoff_controller- Size
- 100 × 52.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 41
- Nets
- 42
- Pads
- 128
- Tracks, vias
- 240, 122
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 25 Jul 2024
- Updated
- 12 Sep 2024
Overview
Ac onoff controller is an open-source printed circuit board by RollMan, from the RollMan/ac_onoff_controller repository on GitHub. It is a 2-layer board of 100 × 52.5 mm with 41 parts on 42 nets, routed with 240 tracks and 122 vias.
It is built around the ATMEGA88P-20PU, DHT20 and 2SK4017(Q), with the 1N5227B, 2SC1815 and SS22F25G4.5 among its other parts. Its parts include 7 capacitors, 7 diodes, 6 resistors, 5 switches and 4 transistors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
6
ATMEGA88P-20PU
PDIP-28-40℃~+85℃ 10bit 1KB 2.7V~5.5V 20MHz 23 512Byte 8 Bit 8KB AVR Built-in FLASH PDIP-28 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
DHT20
SIP-4-40℃~+80℃ 0%RH~100%RH 2.2V~5.5V 980uA Factory calibration I2C ±0.5℃ ±3%RH SIP-4 Temperature and Humidity Sensor ROHSAosong ElecTemperature And Humidity Sensor
2SK4017(Q)
TO-251(IPAK)1 N-channel 150mΩ@4V 15nC@10V 2.5V 20W 5A 60V 60pF 730pF 95pF N-Channel ±20V TO-251(IPAK) MOSFETs ROHSToshibaMOSFETs1N5227B
插件,D1.53xL3.05mm-65℃~+200℃ 1 Independent 1.7kΩ 15uA@1V 24Ω 3.42V~3.78V 3.6V 500mW Plugin,D1.53xL3.05mm Zener Diodes ROHSonsemiZener Diodes
2SC1815
SOT-23-55℃~+150℃ 1 NPN 100nA 130 150mA 200mW 250mV 50V 5V 80MHz NPN SOT-23 Bipolar (BJT) ROHShongjiachengBipolar (BJT)SS22F25G4.5
-- Slide Switches ROHSC&KSlide Switches
README
README.mdAppearance
Improvements
The 2nd servo motor (M2) must be connected to PB2 which is assigned as compare output mode.
Parts
41| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 0.1u | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C1, C2, C4, C5, C6 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 4 | SW_Push | Button_Switch_THT:SW_PUSH_6mm_H7.3mm | SW2, SW3, SW4, SW5 |
| 3 | 22k | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P2.54mm_Vertical | R6, R7, R8 |
| 3 | 2SK4017 | Package_TO_SOT_THT:TO-251-3_Vertical | Q1, Q2, Q6 |
| 3 | LED | LED_THT:LED_D3.0mm | D4, D5, D6 |
| 2 | 1N4148 | Diode_THT:D_A-405_P10.16mm_Horizontal | D2, D3 |
| 2 | 500 | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P15.24mm_Horizontal | R4, R5 |
| 2 | Motor_Servo | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | M1, M2 |
| 1 | 1000u | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C3 |
| 1 | 10u | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C7 |
| 1 | 1N5227B | Diode_THT:D_A-405_P10.16mm_Horizontal | D1 |
| 1 | 20k | ac_onoff_controller:GF063P | RV1 |
| 1 | 2SC1815 | Package_TO_SOT_THT:TO-92_Inline_Wide | Q3 |
| 1 | 47k | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P15.24mm_Horizontal | R1 |
| 1 | ATmega88P-20P | Package_DIP:DIP-28_W7.62mm | U1 |
| 1 | Battery | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | BT1 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | Conn_02x04_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J1 |
| 1 | D | Diode_THT:D_DO-15_P12.70mm_Horizontal | D7 |
| 1 | DHT20 | ac_onoff_controller:Aosong_DHT20 | U2 |
| 1 | SW_SPST | ac_onoff_controller:SS-22F25-G4 | SW1 |
Questions
How big is the Ac onoff controller PCB?
It measures 100 × 52.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Ac onoff controller use?
41 parts, built around the ATMEGA88P-20PU, DHT20, 2SK4017(Q) and 1N5227B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ac onoff controller KiCad files?
From the RollMan/ac_onoff_controller repository on GitHub, at the commit this page was made from: the board is hardware/ac_onoff_controller/ac_onoff_controller.kicad_pcb and its schematic hardware/ac_onoff_controller/ac_onoff_controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ac onoff controller design in my own project?
Its repository states no licence, so its author keeps all rights: ask RollMan before reusing the design.
Similar boards
- 2 layers79.2 × 97 mm
Interrupter
profdc9/DRSSTC-PCB-Pack
A pack of PCBs for a dual resonant solid state tesla coil setup. Pretty much everything you need.
80 parts59 - 2 layers
- 2 layers
- 4 layers188.5 × 82 mm
Digital waters
atop8918/DigitalWaters_WD_prototype
Simplified Schematic for prototype release
118 partsMIT - 2 layers101.6 × 101.6 mm
Boot camp pcb
eshazen/reference_designs
Example projects for educational purposes - no warranty!
35 partsCC0-1.0 - 2 layers68.6 × 53.3 mm
Sensor module
iconner22/env_monitor_nodes
Adruino code and schematics for ad-hoc wireless sensor networks used for environmental monitoring. Project developed for senior year computer engineering capstone project.
9 parts - 2 layers40 × 97.9 mm
