

FT MotorControl
Great
- Size
- 82.4 × 79.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 31
- Nets
- 88
- Pads
- 140
- Tracks, vias
- 0, 0
- Pours
- 1
- Routed
- Not yet
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 4 May 2026
- Updated
- 21 Aug 2026
Overview
FT MotorControl is an open-source printed circuit board by rolandvs, from the rolandvs/Fischertechnik repository on GitHub, published under the MIT licence. It is a 2-layer board of 82.4 × 79.5 mm with 31 parts on 88 nets.
It is built around the L293D. Its parts include 29 connectors and 2 ICs.
Main components
1README
README.mdFischertechnik Revisited
This repository holds my experiments with Fischertechnik.

Recently I got some old building blocks and accessoires. It is like reliving my youth. Today I can appreciate the powerfulness of the blocks much more and now I can also add things I like to it.
So now I started this repo. First thing was to create 3D printed blocks that can be used together with the original stuff. The purpose is not to duplicate it, but be able to add small (electronics based) blocks w/ or w/o pogo pins, small PCB, having sensors and other stuff.
3D
In the 3D directory you will find two NOT VERIFIED YET blocks that serve as basis to build other blocks. The OpenSCAD source and a .STL can be found there.
No part has been printed yet to see if the measures are correct (lacking a 3D printer).


KiCad
In the KiCad directory you will find projects that can be useful. Expect a sensor PCB that fits one of the 3D designs, H-bridge for the motors and interfaces to STM32 and/or BBC micro:bit.
Baustein_15_LED
Just for test and fun a dual LED PCB that can hold two different colors or the same colors and will light one or the other LED when a DC voltage is applied. When an AC voltage is applied they both will be on.

Baustein_151_SENSOR
Re-purposing a line follower optical sensor for use as a switch.
H-Bridge micro:bit
Fischertechnik provides a micro:bit interface with two H-bridges link.

The contact points can fit a connector directly. For my use it is to expensive to buy the kit, especially while having the parts here in the junkbox.
This project is inspired by the work of Didacta's Education Projects
Currently made:
- Symbols for the micro:bit connector
- Symbol for the 2.5mm plugs (also used by Märklin)
Starting to add more interfaces... WORK IN PROGRESS

H-Bridge variants
Tibbo Box Module
A nice Linux platform with a casing that allows modules. WORK IN PROGRESS
SMD
Also started designing with a nice Toshiba IC that saves some room (SMD). See KiCad project...
STM32 Controller
Ideation phase...
WORK IN PROGRESS
Projects
In this section some projects will be documented.
WORK IN PROGRESS
Elevator
The elevator is a project that has two multi-floor elevators where the users can press a button per floor. Depending on the traffic, the correct elevator is selected to either move up or down, with its intent to do this ASAP.
Go to Elevator Project - WORK IN PROGRESS
Crane
A crane lifting a load and bring it to its specific location. It involves using Fuzzy Logic to compensate for the pendulum effect.
Go to Crane Project - WORK IN PROGRESS
Other Sources
** Very nice website, good mix of STEM, IoT and Fischertechnik!** Nice magazines for downloading!!
Copyright (c)2026 by Roland van Straten. All Rights Reserved. Commercial in Confidence.
Parts
31| Qty | Value | Footprint | References |
|---|---|---|---|
| 28 | Conn_01x01_Socket | Fischertechnik:Marklin_7132_7135_Plug_PressFit | J2, J10, J11, J12, J13, J14, J15, J16, J17, J18, J19, J20, J21, J22, J23, J24 +12 |
| 2 | L293D | Package_DIP:DIP-16_W7.62mm | U1, U2 |
| 1 | microbit_edge_connector | Connectors_4UCON:4UCON_17909_02x401.27mm_Vertical | J1 |
More from rolandvs/Fischertechnik
3- 2 layers12.5 × 12.5 mm

- 2 layers12.5 × 12.5 mm

- 2 layers33.1 × 32.2 mm

Similar boards
- 2 layers178 × 145 mm

Ultra DB X51 v1
ExploreEmbedded/8051_DevelopmentBoard
Design files and sample code for 8051 development Ultra Boards
145 parts70 - 2 layers84.3 × 58.4 mm

EnocderDriver
NikodemBartnik/Small-Projects
All of smaller projects (Arduino, PCBs, electronics, code)
35 parts55 - 2 layers56.4 × 72.6 mm

Ras pi hat
geno543/Redropi_highway
the project aims to detect asteroids and meteor movement using high-quality cameras and radar detection methods using an AI model for accurate analysis, and it classifies bodies be in three categories: non-meteor…
8 parts13 - 2 layers87.5 × 70 mm

- 2 layers92.5 × 62.5 mm

DropGenPCB
harrislab-brown/DropGen
DropGen uses a fluid reservoir and a piezoelectric buzzer to precisely and repeatably dispense small droplets on demand.
25 parts12CC-BY-SA-4.0 - 2 layers47.5 × 49.5 mm

- 2 layers120.7 × 184.1 mm

- 2 layers90 × 53.4 mm

Questions
How big is the FT MotorControl PCB?
It measures 82.4 × 79.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the FT MotorControl use?
31 parts, built around the L293D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the FT MotorControl KiCad files?
From the rolandvs/Fischertechnik repository on GitHub, at the commit this page was made from: the board is KiCad/FT-MotorControl/FT-MotorControl.kicad_pcb and its schematic KiCad/Baustein_15/Baustein_15.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the FT MotorControl design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).