2 layers72 × 42 mm
NRF24 jammer
W0rthlessS0ul/nRF24_jammer
The nRF24 jammer is a powerful tool that requires an ESP32 and configurable numbers of NRF24 modules to assemble.
51 parts1kMIT
2 layers125 × 75 mm
Alarm sensors
rojer/myhome- Size
- 125 × 75 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 60
- Nets
- 80
- Pads
- 244
- Tracks, vias
- 353, 10
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 6 Sep 2021
- Updated
- 25 Aug 2025
Overview
Alarm sensors is an open-source printed circuit board by rojer, from the rojer/myhome repository on GitHub. It is a 2-layer board of 125 × 75 mm with 60 parts on 80 nets, routed with 353 tracks and 10 vias.
It is built around the ESP32-WROOM-32D. Its parts include 13 resistors, 12 diodes, 12 connectors, 11 ICs and 4 capacitors. It belongs with the sensors and measurement boards and the ESP32 boards of this library.
Main components
1Parts
60| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 330 | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R12, R13 |
| 10 | 3572.1220 | 1:DIP-14_W7.62mm_1267 | U1, U2, U3, U4, U5, U6, U7, U8, U9, U10 |
| 4 | MountingHole | MountingHole:MountingHole_4mm | H2, H3, H4, H5 |
| 2 | 10uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C1, C2 |
| 1 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C4 |
| 1 | 10K | Resistor_SMD:R_0603_1608Metric | R11 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric | C3 |
| 1 | BTN | Button_Switch_THT:SW_PUSH_6mm | SW2 |
| 1 | Debug | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J12 |
| 1 | ESP32-WROOM-32D | RF_Module:ESP32-WROOM-32 | U12 |
| 1 | MountingHole | MountingHole:MountingHole_6mm | H1 |
| 1 | PC02S1203A | PC02S1203A:PC02S1203A | PS1 |
| 1 | PWR | OSTVN04A150:OSTVN04A150 | J11 |
| 1 | PWR | LED_THT:LED_D3.0mm | D12 |
| 1 | Reset | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | STATUS | LED_THT:LED_D3.0mm | D11 |
| 1 | Z 4 | OSTVN04A150:OSTVN04A150 | J4 |
| 1 | Z 5 | OSTVN04A150:OSTVN04A150 | J5 |
| 1 | Z 6 | OSTVN04A150:OSTVN04A150 | J6 |
| 1 | Z 7 | OSTVN04A150:OSTVN04A150 | J7 |
| 1 | Z1 | LED_THT:LED_D3.0mm | D1 |
| 1 | Z10 | LED_THT:LED_D3.0mm | D10 |
| 1 | Z2 | LED_THT:LED_D3.0mm | D2 |
| 1 | Z3 | LED_THT:LED_D3.0mm | D3 |
| 1 | Z4 | LED_THT:LED_D3.0mm | D4 |
| 1 | Z5 | LED_THT:LED_D3.0mm | D5 |
| 1 | Z6 | LED_THT:LED_D3.0mm | D6 |
| 1 | Z7 | LED_THT:LED_D3.0mm | D7 |
| 1 | Z8 | LED_THT:LED_D3.0mm | D8 |
| 1 | Z9 | LED_THT:LED_D3.0mm | D9 |
| 1 | ZONE 1 | OSTVN04A150:OSTVN04A150 | J1 |
| 1 | ZONE 10 | OSTVN04A150:OSTVN04A150 | J10 |
| 1 | ZONE 2 | OSTVN04A150:OSTVN04A150 | J2 |
| 1 | ZONE 3 | OSTVN04A150:OSTVN04A150 | J3 |
| 1 | ZONE 8 | OSTVN04A150:OSTVN04A150 | J8 |
| 1 | ZONE 9 | OSTVN04A150:OSTVN04A150 | J9 |
Questions
How big is the Alarm sensors PCB?
It measures 125 × 75 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Alarm sensors use?
60 parts, built around the ESP32-WROOM-32D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Alarm sensors KiCad files?
From the rojer/myhome repository on GitHub, at the commit this page was made from: the board is alarm_sensors/alarm_sensors.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Alarm sensors design in my own project?
Its repository states no licence, so its author keeps all rights: ask rojer before reusing the design.
Similar boards
- 2 layers100 × 57 mm
- 2 layers189.5 × 204.9 mm
SmartSpin2k Panelized
doudar/SmartSpin2k
Transform your spin bike into a Smart Trainer!
749 parts292GPL-2.0 - 2 layers40 × 53.6 mm
- 2 layers147 × 80 mm
Controller
voltlog/Valve-Actuator
If you are looking for sources of previous revisions (revA, revB, revC) checkout the different branches of this repo.
93 parts108GPL-3.0 - 2 layers33.5 × 20 mm
JURA WiFi Dongle
Jutta-Proto/protocol-cpp
C++ JURA protocol implementation for controlling a Jura coffee maker over a serial (UART) connection.
31 parts86GPL-3.0 - 2 layers99.5 × 90.5 mm
- 2 layers22 × 66.5 mm
