2 layers178 × 145 mm
Ultra DB X51 v1
ExploreEmbedded/8051_DevelopmentBoard
Design files and sample code for 8051 development Ultra Boards
145 parts70
2 layers41.9 × 35 mm
Toy car motor driver
rohitCodeRed/toy_car_motor_driver_pcb- Size
- 41.9 × 35 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 14
- Nets
- 14
- Pads
- 46
- Tracks, vias
- 139, 14
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 18 Oct 2024
- Updated
- 18 Oct 2024
Overview
Toy car motor driver is an open-source printed circuit board by rohitCodeRed, from the rohitCodeRed/toy_car_motor_driver_pcb repository on GitHub. It is a 2-layer board of 41.9 × 35 mm with 14 parts on 14 nets, routed with 139 tracks and 14 vias.
It is built around the L293D. Its parts include 6 capacitors, 5 connectors, 1 resistor, 1 IC and 1 diode. It belongs with the robots and motor control boards of this library.
Main components
1Parts
14| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 1uF | Capacitor_THT:C_Disc_D3.8mm_W2.6mm_P2.50mm | C1, C2, C3, C4 |
| 3 | Screw_Terminal_01x02 | Connector:JWT_A3963_1x02_P3.96mm_Vertical | J4, J5, J6 |
| 2 | 0.1uF | Capacitor_THT:C_Disc_D3.8mm_W2.6mm_P2.50mm | C5, C6 |
| 1 | 510 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | Conn_01x06_Pin | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J1 |
| 1 | L293D | Package_DIP:DIP-16_W7.62mm | U1 |
| 1 | LED | LED_THT:LED_D3.0mm | D1 |
Similar boards
- 2 layers84.3 × 58.4 mm
EnocderDriver
NikodemBartnik/Small-Projects
All of smaller projects (Arduino, PCBs, electronics, code)
35 parts55 - 2 layers56.4 × 72.6 mm
Ras pi hat
geno543/Redropi_highway
the project aims to detect asteroids and meteor movement using high-quality cameras and radar detection methods using an AI model for accurate analysis, and it classifies bodies be in three categories: non-meteor…
8 parts13 - 2 layers87.5 × 70 mm
- 2 layers92.5 × 62.5 mm
DropGenPCB
harrislab-brown/DropGen
DropGen uses a fluid reservoir and a piezoelectric buzzer to precisely and repeatably dispense small droplets on demand.
25 parts12CC-BY-SA-4.0 - 2 layers47.5 × 49.5 mm
- 2 layers120.7 × 184.1 mm
- 2 layers90 × 53.4 mm
Questions
How big is the Toy car motor driver PCB?
It measures 41.9 × 35 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Toy car motor driver use?
14 parts, built around the L293D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Toy car motor driver KiCad files?
From the rohitCodeRed/toy_car_motor_driver_pcb repository on GitHub, at the commit this page was made from: the board is toy_car_motor_driver.kicad_pcb and its schematic toy_car_motor_driver.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Toy car motor driver design in my own project?
Its repository states no licence, so its author keeps all rights: ask rohitCodeRed before reusing the design.