
MainPCB
rohit-env/minideck-pcb
so I went off and designed a whole cyberdeck pcb, it’s kinda sick, it's a full-on deck with ports, buttons, blinky stuff, and that clean hacker aesthetic.

so I went off and designed a whole cyberdeck pcb, it’s kinda sick, it's a full-on deck with ports, buttons, blinky stuff, and that clean hacker aesthetic.
DisplayPCB is an open-source printed circuit board by rohit-env, from the rohit-env/minideck-pcb repository on GitHub. It is a 2-layer board of 99.4 × 75.9 mm with 52 parts on 140 nets, routed with 1,218 tracks and 258 vias.
It is built around the TSC2007IPW. Its parts include 15 resistors, 14 capacitors, 4 connectors, 3 ICs and 2 diodes.
so I went off and designed a whole cyberdeck pcb, it’s kinda sick, it's a full-on deck with ports, buttons, blinky stuff, and that clean hacker aesthetic. built it because laptops are boring and carrying around raw PCBs just hits different.the board’s got space for a pi, a couple usb ports, an oled, and some clicky switches. stuff’s laid out in a way that makes sense, but also makes you look like you’re about to jack into the matrix at a coffee shop. the idea is simple cram as much functional coolness as possible onto one board and still make it portable enough to flex at meetups. this whole thing started with a sketch on a sticky note and now it’s a real life project(obviously i need money to make it real). i even left space for expansion headers because future proofing or whatever. no idea how many late nights went into routing this lol
Uses Raspberry-pi CM4 form-factor for main SBC.
5inch or 4.3inch LCD display with support for another External Display out port.
Uses ESP32-S2 for all the secondary functions including keyboard and mouse control.
61 key customizable keyboard, 6 shoulder button for navigation.
3D hall-effect joystick is used for proper Mouse control.
10000mAh(21700) 2S battery can be used for main power source.
USB-PD 2Amps fast charging using USB-C port.
One USB-A and display out for external display.
USB-C formfactor Nurolink/docking port with UART, I2C.
| Image | Description |
|---|---|
| top |
| Image | Description |
|---|---|
| side |
| Image | Description |
|---|---|
| top side |
| Image | Description |
|---|---|
| main pcb render |
| Image | Description |
|---|---|
| display pcb render |
| Image | Description |
|---|---|
| main pcb |
| Image | Description |
|---|---|
| display pcb |
| Component | Description | Qty | Estimated Price (USD) | Link |
|---|---|---|---|---|
| PCB | Custom PCB | 1 | $92 (without pcba after $20 coupon) | JLCPCB |
| 4.3 inch display | Display for the deck | 1 | $36.16 | Robocraze |
| 21700 batteries | Batteries | 1 (pair) | $10.41 | Drkstore |
| 5V Voltage Regulator | Power regulator for the display | 2 | $11.76 | Robocraze |
| ESP32 Microcontroller | Controls everything in the device (keyboard, mouse, etc.) | 1 | $0 | Already available |
| Raspberry Pi Compute Module | Heart of the device | 1 | $80 | Robu |
BOM: $229
| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 0.1uF | mutantCybernetics:Capacitor-0805 | C4, C6, C7, C8, C9, C10, C11, C12, C13, C14 |
| 7 | 33R | mutantCybernetics:Resistor-4x0603 | R9, R10, R11, R12, R13, R14, R15 |
| 4 | 0R | mutantCybernetics:Ferrite-0805 | FB1, FB2, FB3, FB4 |
| 3 | 100K | mutantCybernetics:Resistor-0805 | R3, R4, R16 |
| 3 | Solder_jumper-Open | mutantCybernetics:SolderJumper-Open | SJ1, SJ2, SJ3 |
| 2 | 10K | mutantCybernetics:Resistor-0805 | R7, R8 |
| 2 | 10uF | mutantCybernetics:Capacitor-1206 | C1, C5 |
| 2 | 1uF | mutantCybernetics:Capacitor-0805 | C2, C3 |
| 2 | FPC-40 | mutantCybernetics:FPC-40-0.5mm-horizontal | J1, J2 |
| 2 | Fiducial | Fiducial:Fiducial_1mm_Mask2mm | FID1, FID2 |
| 1 | 10R | mutantCybernetics:Resistor-0805 | R2 |
| 1 | 15R | mutantCybernetics:Resistor-0805 | R1 |
| 1 | 1K | mutantCybernetics:Resistor-0805 | R5 |
| 1 | 22uH | mutantCybernetics:Inductor-4.0x4.0_H3 | L1 |
| 1 | 2N4148 | mutantCybernetics:Diode-SOD-323 | D1 |
| 1 | AP3019AKTR-G1-(SOT23-6) | mutantCybernetics:SOT-23-6 | U1 |
| 1 | Conn_02x06_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x06_P2.54mm_Vertical | J3 |
| 1 | LDR | mutantCybernetics:LDR-5506-D5mm | LDR1 |
| 1 | MountingHole_Pad | MountingHole:MountingHole_5.3mm_M5 | H1 |
| 1 | SJ1 | Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm | JP2 |
| 1 | SJ2 | Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm | JP1 |
| 1 | Solder_pad | mutantCybernetics:TestPoint-Pad_D1.5mm | P1 |
| 1 | TFP401-(QFP-100) | mutantCybernetics:QFP-100 | U3 |
| 1 | TSC2007 | mutantCybernetics:TSSOP-16 | U2 |
| 1 | WS2812B3535 | mutantCybernetics:LED-3535(WS2812B) | LED1 |

rohit-env/minideck-pcb
so I went off and designed a whole cyberdeck pcb, it’s kinda sick, it's a full-on deck with ports, buttons, blinky stuff, and that clean hacker aesthetic.

voloviq/maithoga_lcd_board_480x320_R61529
PCB Board for Maithoga display with resolution 480x320 based on chip R61529 compatible with ILI9481.


muccc/WomoLIN
Open Source Steuerung von LIN Bus Geräten im Caravan Bereich.


conorpp/u2f-zero
U2F USB token optimized for physical security, affordability, and style

sudomesh/disaster-radio
A (paused) work-in-progress long-range, low-bandwidth wireless disaster recovery mesh network powered by the sun.

Neumi/open_echo
Open Source echo sounder / depth sounder / SONAR for bathymetry and research. Arduino based and compatible.

karawin/Ka-Radio
A wifi webradio with only low cost boards ESP8266 and VS1053 by Jp Cocatrix
It measures 99.4 × 75.9 mm and has 2 copper layers, 1.2 mm thick.
52 parts, built around the TSC2007IPW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the rohit-env/minideck-pcb repository on GitHub, at the commit this page was made from: the board is pcb/displayPCB.kicad_pcb and its schematic pcb/displayPCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask rohit-env before reusing the design.