Skip to the content
4 layers98.6 × 54 mmStepper driver plugin, the printed circuit board in 3D

Liquid Flow PID Stepper Controller for Biosensing Applications

Size
98.6 × 54 mm
Copper layers
4
Thickness
1.6 mm
Parts
16
Nets
92
Pads
152
Tracks, vias
102, 3
Pours
4
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
21 May 2025
Updated
14 Jul 2025

Overview

Stepper driver plugin is an open-source printed circuit board by rode-o, from the rode-o/Stepper_Controller_V0.00.00 repository on GitHub. It is a 4-layer board of 98.6 × 54 mm with 16 parts on 92 nets, routed with 102 tracks and 3 vias.

It is built around the TSR 1-2450E, FG11X7R1H106KRT06 and PJ-067B, with the S4B-XH-A-1 among its other parts. Its parts include 3 capacitors, 3 connectors, 2 ICs and 1 fuse. It belongs with the robots and motor control boards and the RP2040 boards of this library.

Main components

4

README

README.md

DRV8825 Stepper Starter Kit

Minimal yet robust code base for a single DRV8825 driver controlled by a Seeed XIAO RP2040, plus a cross‑platform PyQt6 GUI and CLI.

text
project/
 ├─ firmware/         → Arduino firmware for the XIAO
 └─ host/             → Python tools (GUI & CLI)

See individual READMEs for usage.

Stepper_Controller_V0.00.00

Parts

16
QtyValueFootprintReferences
4MountingHoleMountingHole:MountingHole_2.2mm_M2H1, H2, H3, H4
153048-061053048-0610:53048-0610P1
1BK_PCB-3-RBKPCB3R:BKPCB3RF1
1EEHAZA1V101BEEHAZA1V101B:EEHAZA1V101BC1
1FG11X7R1H106KRT06CAPRB250W50L550T400H700:CAPRB250W50L550T400H700C2
1FK11X7R1A226MR020CAPRB250W50L550T400H700:CAPRB250W50L550T400H700C3
1LOGOlogo:logoG***
1OLEDRPi_Pico_SMD_TH:RPi_Pico_SMD_THU3
1PJ-067BCUI_PJ-067B:CUI_PJ-067BJ2
1Pololu_Breakout_DRV8825Module:Pololu_Breakout-16_15.2x20.3mmA1
1S4B-XH-A-1JST_S4B-XH-A-1:JST_S4B-XH-A-1J1
1TSR_1-2450ECONV_TSR_1-2450E:CONV_TSR_1-2450EPS1
1XIAO RP2040XIAO-RP2040-DIP:XIAO-RP2040-DIPU1

Similar boards

  • 4 layers70 × 70 mmTank, the printed circuit board in 3D

    Tank

    frangipp/TANK-PCB

    Projet étudiant réalisé en binôme à l’ESEO Angers, ce TANK est un robot mobile à entraînement différentiel, piloté en Bluetooth via une application Android.

    163 parts
  • 4 layers67 × 23.5 mmTelemetry Receiver, the printed circuit board in 3D

    Telemetry Receiver

    PUT-Motorsport/PUTM_EV_TELEMETRY_RECEIVER_2022

    56 partsApache-2.0
  • 4 layers65 × 70 mmSwr meter, the printed circuit board in 3D

    Swr meter

    F6ITU/vswr_meter

    PD0LEW reflectometer fork

    70 parts3
  • 4 layers80 × 80 mmPICO iot, the printed circuit board in 3D

    PICO iot

    Ayan-nova/Design-of-a-Raspberry-PICO-Iot-Device-on-4-Layer-PCB-Design-With-Sensor-And-More

    Design a Raspberry Pi Pico W-based Industrial IoT Gateway and Edge Controller using Kicad software.

    60 parts1
  • 2 layers57 × 49.7 mmGp2026, the printed circuit board in 3D

    Gp2026

    baloghr/usonic

    KiCad 9 project gp2026 (hardware revision 1.01): schematic, PCB, custom footprints (Library.pretty) and 3D models (packages3D).

    17 parts1
  • 2 layers110.6 × 83.1 mmMain board proto, the printed circuit board in 3D

    Main board proto

    ismailEngineer/omniwheel-robot

    a small protoype to educate the control system of 3 OmniWheel Robot

    35 parts1
  • 2 layers101 × 70 mmHECU, the printed circuit board in 3D

    HECU

    twitch0001/HECU

    v1 - UWEFS HybridCU (Teensy 4.1 Based)

    40 parts1
  • 4 layers99 × 146 mmCarte principale, the printed circuit board in 3D

    Carte principale

    Unimakers/CDR-2027

    Ce repo est un site de documentation réalisé par l'équipe des première et deusième années pré-ingénieur de l'école Unilasalle-Amiens, membre de l'association de robotique Unimaker, dans le cadre de leur participation à…

    156 parts1

Questions

How big is the Stepper driver plugin PCB?

It measures 98.6 × 54 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Stepper driver plugin use?

16 parts, built around the TSR 1-2450E, FG11X7R1H106KRT06, PJ-067B and S4B-XH-A-1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Stepper driver plugin KiCad files?

From the rode-o/Stepper_Controller_V0.00.00 repository on GitHub, at the commit this page was made from: the board is hardware/stepper_driver/stepper_driver_plugin.kicad_pcb and its schematic hardware/stepper_driver/stepper_driver_plugin.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Stepper driver plugin design in my own project?

Its repository states no licence, so its author keeps all rights: ask rode-o before reusing the design.