2 layers119 × 96 mm
Control panel
Roboy/VRpuppet
An actor struggles to die onstage, but a puppet has to struggle to live
28 partsBSD-3-Clause
2 layers156 × 86 mm
Stepper control
Roboy/VRpuppetAn actor struggles to die onstage, but a puppet has to struggle to live
- Size
- 156 × 86 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 20
- Nets
- 121
- Pads
- 250
- Tracks, vias
- 315, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 27 May 2019
- Updated
- 29 Sep 2019
Overview
Stepper control is an open-source printed circuit board by Roboy, from the Roboy/VRpuppet repository on GitHub, published under the BSD-3-Clause licence. It is a 2-layer board of 156 × 86 mm with 20 parts on 121 nets, routed with 315 tracks and 0 vias.
It belongs with the robots and motor control boards and the AVR (ATmega, ATtiny) boards of this library.
README
README.mdVRpuppet
An actor struggles to die onstage, but a puppet has to struggle to live
Parts
20| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | Pololu_Breakout_A4988 | Module:Pololu_Breakout-16_15.2x20.3mm | A1, A2, A3, A4, A5, A6 |
| 2 | Conn_01x02_Male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J7, J12 |
| 2 | Conn_01x09_Male | Connector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_Vertical | J9, J10 |
| 1 | Arduino_Mega2560_Shield | Arduino:Arduino_Mega2560_Shield | XA1 |
| 1 | Conn_01x01_Male | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J11 |
| 1 | POWER | custom_lib:Wago_2060_2_SMD | J1 |
| 1 | SPI | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J13 |
| 1 | motor0 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | motor1 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | motor2 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | motor3 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | motor4 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J6 |
| 1 | motor5 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J8 |
Questions
How big is the Stepper control PCB?
It measures 156 × 86 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Stepper control use?
20 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Stepper control KiCad files?
From the Roboy/VRpuppet repository on GitHub, at the commit this page was made from: the board is hardware/stepper_control/stepper_control.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Stepper control design in my own project?
Its repository publishes it under the BSD-3-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from Roboy/VRpuppet
1Similar boards
- 2 layers66.9 × 74.5 mm
- 2 layers86.4 × 64.8 mm
- 2 layers36.2 × 26.8 mm
Esp32 minimal
atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️
20 parts4kMIT - 2 layers108.1 × 393.8 mm
Sweep compact ble
davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.
20 parts2.1k - 2 layers26 × 15.9 mm
TPS54340 Buck Regulator
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
20 parts1.2k - 2 layers67.6 × 30.5 mm
Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
20 parts1kGPL-3.0 - 2 layers44.3 × 28.7 mm
Lin bus adapter esp32
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
20 parts915 - 2 layers89.5 × 61.6 mm
FreeDeck TH 2020-02
FreeYourStream/freedeck-hardware
all the stuff you need to build your own FreeDeck
20 parts772