6 layers80 × 49 mm
ButterStick
butterstick-fpga/butterstick-hardware
Basic ECP5 based GigE to SYZYGY interface.
256 parts225
2 layers50 × 33.8 mm
Magneto bot shield
Roboy/magneto_bot- Size
- 50 × 33.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 37
- Nets
- 28
- Pads
- 122
- Tracks, vias
- 242, 171
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 4 Dec 2019
- Updated
- 12 Mar 2020
Overview
Magneto bot shield is an open-source printed circuit board by Roboy, from the Roboy/magneto_bot repository on GitHub, published under the BSD-3-Clause licence. It is a 2-layer board of 50 × 33.8 mm with 37 parts on 28 nets, routed with 242 tracks and 171 vias.
It is built around the AON7804. Its parts include 8 connectors, 7 resistors, 7 diodes, 5 capacitors and 3 transistors.
Main components
1Parts
37| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | LED | LED_SMD:LED_0402_1005Metric | D1, D2, D3, D4, D5, D6, D7 |
| 6 | 1k | Resistor_SMD:R_0402_1005Metric | R1, R2, R3, R4, R6, R7 |
| 3 | AON7804 | AON7804:DFN3X3 | Q1, Q2, Q3 |
| 2 | 2.2uF | Capacitor_SMD:C_0402_1005Metric | C1, C2 |
| 2 | MountingHole_Pad | MountingHole:MountingHole_2.2mm_M2_Pad | H1, H2 |
| 1 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C4 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric | R5 |
| 1 | 10uH | custom_lib:XAL5050-103MEC | L1 |
| 1 | 22uF | Capacitor_SMD:C_0805_2012Metric | C5 |
| 1 | 5600pF | Capacitor_SMD:C_0402_1005Metric | C3 |
| 1 | CON0 | custom_lib:Wago_2060_2_SMD | J1 |
| 1 | CON1 | custom_lib:Wago_2060_2_SMD | J2 |
| 1 | CON2 | custom_lib:Wago_2060_2_SMD | J3 |
| 1 | CON3 | custom_lib:Wago_2060_2_SMD | J4 |
| 1 | CON4 | custom_lib:Wago_2060_2_SMD | J5 |
| 1 | CON5 | custom_lib:Wago_2060_2_SMD | J8 |
| 1 | Conn_01x08_Female | custom_lib:micro_match_female_8pos_SMT | J7 |
| 1 | LABEL | custom_lib:R1_ear_silk_5.5mm | H3 |
| 1 | LABEL | custom_lib:R1_eyes_mask_5.5mm | H4 |
| 1 | LABEL | custom_lib:R1_face_mask_5.5mm | H5 |
| 1 | MAX17632 | custom_lib:QFN-16-1EP_3x3mm_Pitch0.5mm | MAX1 |
| 1 | POWER_IN | custom_lib:Wago_2060_2_SMD | J6 |
Questions
How big is the Magneto bot shield PCB?
It measures 50 × 33.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Magneto bot shield use?
37 parts, built around the AON7804. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Magneto bot shield KiCad files?
From the Roboy/magneto_bot repository on GitHub, at the commit this page was made from: the board is magneto_bot_shield/magneto_bot_shield.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Magneto bot shield design in my own project?
Its repository publishes it under the BSD-3-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 4 layers70 × 80 mm
Neptune toolboard
LoicGRENON/Neptune_toolboard
a CAN bus toolboard designed to be used for 3D printing and SMD pick and place using Klipper
114 parts2GPL-3.0 - 2 layers137.1 × 87 mm
Myo shield pcb
Roboy/myo_shield
devel - a shield for the de10-nano-soc making the cableing greater again
183 parts1BSD-3-Clause - 4 layers100 × 27 mm
Props board v3
ephemeridis/props_board
ESP32 based control board for costumes and props featuring USB PD enabled charging
188 partsGPL-3.0 - 4 layers81.3 × 45.4 mm
- 2 layers40 × 34 mm
- 2 layers53.9 × 23.2 mm
Analog
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
37 parts1kGPL-3.0 - 2 layers52 × 51.8 mm
Esp32-homeassistant rf bridge
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
37 parts915