2 layers196 × 112 mm
2 layers52 × 56 mm
Schmitt trigger adapter
Roboy/m3myo mini muscle
- Size
- 52 × 56 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 72
- Nets
- 11
- Pads
- 312
- Tracks, vias
- 672, 104
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 19 Dec 2018
- Updated
- 14 Feb 2021
Overview
Schmitt trigger adapter is an open-source printed circuit board by Roboy, from the Roboy/m3 repository on GitHub, published under the BSD-3-Clause licence. It is a 2-layer board of 52 × 56 mm with 72 parts on 11 nets, routed with 672 tracks and 104 vias.
Its parts include 48 connectors and 24 resistors. It belongs with the interfaces and adapters boards of this library.
README
README.mdm3
myo mini muscle
Parts
72| Qty | Value | Footprint | References |
|---|---|---|---|
| 24 | 2k | Resistor_SMD:R_0402_1005Metric | R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R2, R2, R2, R2 +8 |
| 24 | Conn_01x05_Female | custom_lib:SC70-5 | J3, J3, J3, J3, J3, J3, J3, J3, J3, J3, J3, J3, J4, J4, J4, J4 +8 |
| 12 | pcb_adapter | custom_lib:tcut1350x01 | J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1 |
| 12 | real_sensor | custom_lib:tcut1350x01 | J2, J2, J2, J2, J2, J2, J2, J2, J2, J2, J2, J2 |
More from Roboy/m3
4- 2 layers52 × 56 mm
- 2 layers41.6 × 21 mm
- 2 layers60 × 37 mm
Similar boards
- 2 layers50 × 90 mm
Hackholidays
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
72 parts915 - 2 layers59.9 × 82.5 mm
Centronics 50Pin
BlueSCSI/BlueSCSI-v2
BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350
72 parts459GPL-3.0 - 2 layers45.7 × 168.3 mm
- 2 layers152.4 × 101.6 mm
8088-FE2010A SBC
skiselev/micro_8088
Micro 8088 - IBM XT Compatible Processor Board based on Faraday FE2010 chipset
72 parts412GPL-3.0 - 2 layers80.8 × 50.8 mm
- 2 layers23 × 120 mm
- 2 layers237.5 × 102.9 mm
Serial
jes/scamp-cpu
A homebrew 16-bit CPU with a homebrew Unix-like-ish operating system.
72 parts301Unlicense - 2 layers109.2 × 78.7 mm
Duo Adapter V0.5
Ardumower/ardumower
Develop an open source robotic lawn mower (HW+SW reference platform)
72 parts282
Questions
How big is the Schmitt trigger adapter PCB?
It measures 52 × 56 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Schmitt trigger adapter use?
72 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Schmitt trigger adapter KiCad files?
From the Roboy/m3 repository on GitHub, at the commit this page was made from: the board is schmitt_trigger_adapter/schmitt_trigger_adapter.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Schmitt trigger adapter design in my own project?
Its repository publishes it under the BSD-3-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).