2 layers50 × 46 mm
Output.load cell panel
Roboy/load_cell
different approaches for measuring force on tendons
164 partsBSD-3-Clause
2 layers50 × 46 mm
Load cell panel
Roboy/load_celldifferent approaches for measuring force on tendons
- Size
- 50 × 46 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 96
- Nets
- 6
- Pads
- 336
- Tracks, vias
- 784, 80
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 27 Feb 2020
- Updated
- 19 May 2020
Overview
Load cell panel is an open-source printed circuit board by Roboy, from the Roboy/load_cell repository on GitHub, published under the BSD-3-Clause licence. It is a 2-layer board of 50 × 46 mm with 96 parts on 6 nets, routed with 784 tracks and 80 vias.
It is built around the DPS368XTSA1. Its parts include 32 capacitors, 32 resistors, 16 ICs and 16 connectors. It belongs with the sensors and measurement boards of this library.
Main components
1Parts
96| Qty | Value | Footprint | References |
|---|---|---|---|
| 32 | 100n | Capacitor_SMD:C_0402_1005Metric | C1, C1, C1, C1, C1, C1, C1, C1, C1, C1, C1, C1, C1, C1, C1, C1 +16 |
| 32 | 10k | Resistor_SMD:R_0402_1005Metric | R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1 +16 |
| 16 | Conn_01x05_Female | Connector_PinHeader_1.27mm:PinHeader_1x05_P1.27mm_Vertical | J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1 |
| 16 | DPS368XTSA1 | custom_lib:XDCR_DPS368XTSA1 | U1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1 |
Questions
How big is the Load cell panel PCB?
It measures 50 × 46 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Load cell panel use?
96 parts, built around the DPS368XTSA1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Load cell panel KiCad files?
From the Roboy/load_cell repository on GitHub, at the commit this page was made from: the board is dps368/load_cell_panel.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Load cell panel design in my own project?
Its repository publishes it under the BSD-3-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from Roboy/load_cell
2- 2 layers6.6 × 5.8 mm
Similar boards
- 6 layers39.5 × 39.5 mm
- 4 layers36 × 64 mm
- 6 layers22 × 42 mm
- 6 layers22.7 × 19 mm
- 4 layers31 × 45 mm
Trick tracker
HomeSmartMesh/bike_trick_tracker
Tracking sensors for bike movements like height from pressure 9 axis and ToF with record and telemetry
61 parts2MIT - 2 layers104.1 × 67.1 mm
BarometricPressureSensor
cdennis3223/BarometerArray
Capstone Project in collaboration with Sam Bower, Utilizing ESP32 controlled devices to measure fast changing barometric pressure in an arrayed pattern with time correlated data.
44 parts1 - 4 layers40 × 40 mm
Atmos fc
cypamigon/atmos_fc
Drone flight controller based on STM32G4 with IMU (ICM-468-P), barometer (DPS-386), OSD (MAX7456) and 32MB flash memory for blackbox logging — running Betaflight.
112 parts1MIT - 2 layers
