2 layers19 × 76 mm
Sub
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
15 parts3kApache-2.0
2 layers
Elbow hub
Roboy/Elbow_hub1Power distribution board for forearm electronics
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 15
- Nets
- 4
- Pads
- 48
- Tracks, vias
- 138, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 3 Feb 2018
- Updated
- 3 Feb 2018
Overview
Elbow hub is an open-source printed circuit board by Roboy, from the Roboy/Elbow_hub repository on GitHub. It is a 2-layer board with 15 parts on 4 nets, routed with 138 tracks and 0 vias.
Parts
15| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | Conn_02x05_Odd_Even | Connector_PinHeader_2.00mm:PinHeader_2x05_P2.00mm_Vertical | ARM-1, ARM-2, ARM-3, ARM-4 |
| 4 | M2 | MountingHole:MountingHole_2.2mm_M2_DIN965 | MK1, MK2, MK3, MK4 |
| 2 | Conn_01x01 | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | PWR-A, PWR-B |
| 1 | |||
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | I2C |
| 1 | LOGO | custom_lib:R1_ear_silk_5.5mm | G*** |
| 1 | LOGO | custom_lib:R1_face_mask_5.5mm | G*** |
| 1 | LOGO | custom_lib:R1_eyes_mask_5.5mm | G*** |
Similar boards
- 2 layers26.7 × 62.2 mm
Deniseadapter
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
15 parts1kGPL-3.0 - 2 layers100 × 44 mm
Videoslot
mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog
15 parts1k - 2 layers91 × 51 mm
BusinessCard
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
15 parts915 - 2 layers24.3 × 57.9 mm
Flosspods pro flex
kenp-io/not-for-airpods-repairs
The content of this repository is licensed under the WTFPL License. Please have a close look at the terms before using this material.
15 parts609WTFPL - 2 layers20.3 × 15.2 mm
L0 Load
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
15 parts546MIT - 2 layers68 × 50 mm
EleLab v2 PowerFeed
Chrismettal/EleLab_v2
Cheap DIY lab system for hobbyists and the tinkering folk
15 parts531GPL-3.0 - 2 layers50.8 × 35.6 mm
Questions
What parts does the Elbow hub use?
15 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Elbow hub KiCad files?
From the Roboy/Elbow_hub repository on GitHub, at the commit this page was made from: the board is elbow_hub.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Elbow hub design in my own project?
Its repository states no licence, so its author keeps all rights: ask Roboy before reusing the design.