

Central
- Size
- 173 × 66 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 64
- Nets
- 47
- Pads
- 249
- Tracks, vias
- 510, 11
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 20 Sep 2017
- Updated
- 28 Mar 2019
Overview
Central is an open-source printed circuit board by robotronik, from the robotronik/cdfr2018 repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 173 × 66 mm with 64 parts on 47 nets, routed with 510 tracks and 11 vias.
It is built around the MC34152D and IRF540N. Its parts include 20 resistors, 15 connectors, 13 ICs, 7 capacitors and 4 diodes.
Main components
2Parts
64| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 47kR | Resistors_SMD:R_1206_HandSoldering | R7, R8, R9, R10, R11, R12, R13, R14 |
| 5 | CONN_01X02 | Connectors_Molex:Molex_KK-6410-02_02x2.54mm_Straight | P11, P12, P13, P14, P15 |
| 4 | 10kR | Resistors_SMD:R_1206_HandSoldering | R1, R2, R3, R4 |
| 4 | CONN_02X03 | Connectors_Molex:Molex_KK-6410-06_06x2.54mm_Straight | P1, P6, P7, P8 |
| 4 | trou-d3mm | Mounting_Holes:MountingHole_3.2mm_M3_Pad | U10, U11, U13, U14 |
| 2 | 1uC | Capacitors_THT:C_Rect_L7.0mm_W2.5mm_P5.00mm | C1, C2 |
| 2 | 20kR | Resistors_SMD:R_1206_HandSoldering | R19, R21 |
| 2 | 500R | Resistors_SMD:R_1206_HandSoldering | R5, R6 |
| 2 | B_Plug_5mm | dsn2596:B plug 5mm | U5, U6 |
| 2 | D | Diodes_SMD:D_SMA_Handsoldering | D1, D2 |
| 2 | DSN2596 | dsn2596:DSN2596 | U7, U8 |
| 2 | FUSE | Fuse_Holders_and_Fuses:Fuseholder5x20_horiz_SemiClosed_Casing10x25mm | F1, F2 |
| 2 | LM317_SOT223 | TO_SOT_Packages_SMD:SOT-223-3Lead_TabPin2 | U2, U3 |
| 2 | Q_NMOS_DGS | TO_SOT_Packages_SMD:SOT-323_SC-70_Handsoldering | Q2, Q3 |
| 1 | 10uC | Capacitors_THT:CP_Radial_D8.0mm_P3.50mm | C5 |
| 1 | 1uC | Capacitors_THT:CP_Radial_D8.0mm_P3.50mm | C3 |
| 1 | 270R | Resistors_SMD:R_1206_HandSoldering | R18 |
| 1 | 3.3kR | Resistors_SMD:R_1206_HandSoldering | R15 |
| 1 | 330R | Resistors_SMD:R_1206_HandSoldering | R17 |
| 1 | 390nC | Capacitors_THT:C_Rect_L7.0mm_W2.5mm_P5.00mm | C4 |
| 1 | 470R | Resistors_SMD:R_1206_HandSoldering | R16 |
| 1 | C | Capacitors_THT:C_Rect_L7.0mm_W2.5mm_P5.00mm | C6 |
| 1 | CONN_LED | Connectors_Molex:Molex_KK-6410-02_02x2.54mm_Straight | P5 |
| 1 | CONN_Selec | Connectors_Molex:Molex_KK-6410-02_02x2.54mm_Straight | P10 |
| 1 | CONN_Speaker | Connectors_Molex:Molex_KK-6410-02_02x2.54mm_Straight | P2 |
| 1 | CONN_jack | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | P3 |
| 1 | CONN_jack_start | Connectors_Molex:Molex_KK-6410-02_02x2.54mm_Straight | P9 |
| 1 | CONN_jacky_led | Connectors_Molex:Molex_KK-6410-02_02x2.54mm_Straight | P4 |
| 1 | CP | Capacitors_THT:CP_Radial_D8.0mm_P3.50mm | C7 |
| 1 | IRF540N | Power_Integrations:TO-220 | Q1 |
| 1 | LED_Green | LEDs:LED_D5.0mm | D4 |
| 1 | LED_Red | LEDs:LED_D5.0mm | D3 |
| 1 | MC34152 | Housings_DIP:DIP-8_W7.62mm_LongPads | U9 |
| 1 | Nucleo-64 | Nucleo_64:Nucleo-64 | U1 |
| 1 | TDA6205 | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U4 |
More from robotronik/cdfr2018
5- 2 layers154 × 65 mm

- 2 layers175 × 90 mm

- 2 layers71.6 × 62.7 mm

- 2 layers

- 2 layers

Similar boards
- 2 layers

Carte 1A cdfr2018
robotronik/cdfr-2018-1A
regroupe tous les fichiers freecad du robot 1A pour la cdfr
65 parts1GPL-3.0 - 2 layers100 × 69 mm

- 2 layers96.8 × 97 mm

Psoc5power
profdc9/DRSSTC-PCB-Pack
A pack of PCBs for a dual resonant solid state tesla coil setup. Pretty much everything you need.
133 parts59 - 2 layers124.5 × 77.5 mm

- 2 layers55 × 90.8 mm

- 2 layers73.7 × 61 mm

- 2 layers

- 4 layers147.8 × 77 mm

2xBLDCPicoV3
AmericanRework/Pico-2x-BLDC
One RP2040 Pico drives two brushless motors! SimpleFOC + Halls + 2304 drivers + TO-220 mosfets or IGBTs. Plugs directly into 450x automower motors.
135 parts7
Questions
How big is the Central PCB?
It measures 173 × 66 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Central use?
64 parts, built around the MC34152D and IRF540N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Central KiCad files?
From the robotronik/cdfr2018 repository on GitHub, at the commit this page was made from: the board is Electronique/Central/central.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Central design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).