Skip to the content
2 layers69.9 × 50.5 mmArm, the printed circuit board in 3D
Size
69.9 × 50.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
14
Nets
83
Pads
129
Tracks, vias
163, 0
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
4 Sep 2022
Updated
24 May 2025

Overview

Arm is an open-source printed circuit board by RoboJackets, from the RoboJackets/urc-electrical repository on GitHub. It is a 2-layer board of 69.9 × 50.5 mm with 14 parts on 83 nets, routed with 163 tracks and 0 vias.

It is built around the TMC2209SILENTSTEPSTICK, TEENSY 4.1 and J00-0045NL. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.

Main components

3

README

README.md

urc-electrical

Parts

14
QtyValueFootprintReferences
4, , ,
3OutputConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalGround, IO_Pins, Stepper
124VConnector_Wire:SolderWire-0.5sqmm_1x02_P4.6mm_D0.9mm_OD2.1mm_Relief24V
1C_LargeCapacitor_THT:CP_Radial_D4.0mm_P1.50mmC_Elec1
1C_SmallCapacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mmC_Eth1
1J00-0045NLEthernetConn:PULSE_J00-0045NLEthernet
1PololuD24V5F5Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical5V_BUCK
1TMC2209_SILENTSTEPSTICKBigtreetech_TMC2209:MODULE_TMC2209_SILENTSTEPSTICKTMC_2209
1Teensy4.1Teensy:Teensy41Teensy 4.1

More from RoboJackets/urc-electrical

8
  • 4 layers80 × 100 mmMain 4layer, the printed circuit board in 3D

    Main 4layer

    RoboJackets/urc-electrical

    37 parts
  • 2 layers80 × 100 mmUrc electrical, the printed circuit board in 3D

    Urc electrical

    RoboJackets/urc-electrical

    33 parts
  • 2 layers93.3 × 93.2 mmScience board, the printed circuit board in 3D

    Science board

    RoboJackets/urc-electrical

    19 parts
  • 2 layers100 × 100 mmStatus light, the printed circuit board in 3D

    Status light

    RoboJackets/urc-electrical

    16 parts
  • 4 layers67.5 × 55 mmArm, the printed circuit board in 3D

    Arm

    RoboJackets/urc-electrical

    13 parts

Similar boards

  • 2 layers90.8 × 35.6 mmERCF easy brd, the printed circuit board in 3D

    ERCF easy brd

    Tircown/ERCF-easy-brd

    More informations on how to reset for flashing:\ https://wiki.seeedstudio.com/Seeeduino-XIAO/#enter-bootloader-mode

    28 parts195GPL-3.0
  • 2 layers92.5 × 62.5 mmDropGenPCB, the printed circuit board in 3D

    DropGenPCB

    harrislab-brown/DropGen

    DropGen uses a fluid reservoir and a piezoelectric buzzer to precisely and repeatably dispense small droplets on demand.

    25 parts12CC-BY-SA-4.0
  • 4 layers130.5 × 171 mmUniMixBase, the printed circuit board in 3D

    UniMixBase

    jarekkt/UniController

    This is a off-spin from my commercial controller for industrial ink printers. It is designed for pick & place machines controlled by OpenPnp

    157 parts6
  • 2 layers91.6 × 65 mmSCARA, the printed circuit board in 3D

    SCARA

    jobitjoseph/SCARA-Robot-Based-on-ESP32-C6

    SCARA Robot Based on ESP32-C6

    67 parts4
  • 2 layers185.7 × 101.9 mmTester circut, the printed circuit board in 3D

    Tester circut

    yazidta/Flying-Probe-Tester

    Automatic PCB Tester

    98 parts3
  • 4 layers102 × 102 mmController, the printed circuit board in 3D

    Controller

    Angelo13C/3d-printer

    Firmware, electronics, mechanics and control interface of a 3D printer

    97 parts2
  • 2 layers24.5 × 49.4 mmRoller blind controller, the printed circuit board in 3D

    Roller blind controller

    ItsRebaseTime/turbomansion

    Hello, welcome to the turbomansion repository.

    6 parts2Unlicense

Questions

How big is the Arm PCB?

It measures 69.9 × 50.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Arm use?

14 parts, built around the TMC2209SILENTSTEPSTICK, TEENSY 4.1 and J00-0045NL. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Arm KiCad files?

From the RoboJackets/urc-electrical repository on GitHub, at the commit this page was made from: the board is boards/arm_box_board/arm.kicad_pcb and its schematic boards/Main/Main/Main.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Arm design in my own project?

Its repository states no licence, so its author keeps all rights: ask RoboJackets before reusing the design.