
MainBoardPB
robodebil/Phase-Regul-Power-Supply
Выпускная Квалификационная работа. Лабораторный блок питания на фазовом управлении

Выпускная Квалификационная работа. Лабораторный блок питания на фазовом управлении
Zero Detector is an open-source printed circuit board by robodebil, from the robodebil/Phase-Regul-Power-Supply repository on GitHub. It is a 2-layer board of 60.3 × 34.9 mm with 9 parts on 8 nets, routed with 40 tracks and 1 via.
It is built around the LTV-357T. Its parts include 4 diodes, 2 resistors, 2 connectors and 1 IC.
Выпускная Квалификационная работа. Лабораторный блок питания на фазовом управлении
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 1N5408 | Diode_THT:D_DO-201AD_P15.24mm_Horizontal | D5, D6, D7, D8 |
| 1 | 1M Ohm | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
| 1 | 47K Ohm | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R2 |
| 1 | Conn_01x02 | Connector_JST:JST_VH_B2P3-VH_1x02_P7.92mm_Vertical | J1 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | LTV-357T | Package_SO:SO-4_4.4x3.6mm_P2.54mm | U2 |

robodebil/Phase-Regul-Power-Supply
Выпускная Квалификационная работа. Лабораторный блок питания на фазовом управлении

robodebil/Phase-Regul-Power-Supply
Выпускная Квалификационная работа. Лабораторный блок питания на фазовом управлении

apfaudio/eurorack-pmod
A eurorack-friendly audio frontend compatible with many FPGA boards, based on the AK4619VN audio CODEC.


SvenHaedrich/kicad_dali_usb_lpc
KiCad Project for DALI to USB interface based on NXP LPC 1114 µController.

IowaScaledEngineering/ckt-irsense
CKT-IRSENSE Reflective Infrared Proximity Sensor

mlab-modules/ISO11446PWR01
Car trailer emulator for use trailer socket as a power source



It measures 60.3 × 34.9 mm and has 2 copper layers, 1.6 mm thick.
9 parts, built around the LTV-357T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the robodebil/Phase-Regul-Power-Supply repository on GitHub, at the commit this page was made from: the board is Zero Detector/Zero Detector.kicad_pcb and its schematic MainBoard PB/MainBoardPB/MainBoardPB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask robodebil before reusing the design.