2 layers44.5 × 46.9 mm
OSO SWAT B1-jig
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
31 parts2.1k
2 layers67.9 × 52.4 mm
RbdPill F107
robodebil/OpenPill_byRBD1STM32F107VCT6 devboard for DIY PCB Transfer.
- Size
- 67.9 × 52.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 31
- Nets
- 107
- Pads
- 267
- Tracks, vias
- 790, 38
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 28 Sep 2026
- Updated
- 28 Sep 2026
Overview
RbdPill F107 is an open-source printed circuit board by robodebil, from the robodebil/OpenPill_byRBD repository on GitHub. It is a 2-layer board of 67.9 × 52.4 mm with 31 parts on 107 nets, routed with 790 tracks and 38 vias.
Its parts include 10 capacitors, 7 resistors, 5 connectors, 2 ICs and 2 diodes. It belongs with the microcontroller boards boards and the STM32 boards of this library.
README
README.mdOpenPill_byRBD
STM32F107VCT6 devboard for DIY PCB Transfer. 1 layer, second lay is jumper
In the near future, I will etch the printed circuit board and post the result a bit later.
I know there are some issues; I’ll do my best to fix them.
Parts
31| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 40 pF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C6, C7, C8, C9 |
| 2 | 1 MOhm | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R6 |
| 2 | 1 uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2 |
| 2 | 100 nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4, C5 |
| 2 | 5.1 kOhm | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R3 |
| 2 | 510 Ohm | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R5 |
| 2 | Conn_02x20_Counter_Clockwise | Connector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_Vertical | J2, J3 |
| 2 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D2 |
| 1 | 0.1 uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C10 |
| 1 | 10 kOhm | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7 |
| 1 | 10 nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3 |
| 1 | 8 MHz | Crystal:Crystal_SMD_SeikoEpson_MC306-4Pin_8.0x3.2mm_HandSoldering | Y2 |
| 1 | 8 MHz | Crystal:Crystal_HC18-U_Vertical | Y1 |
| 1 | Conn_01x02 | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J1 |
| 1 | Conn_01x06 | Connector_JST:JST_EH_B6B-EH-A_1x06_P2.50mm_Vertical | J4 |
| 1 | Conn_02x03_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | BOOT1 |
| 1 | LD3985M33R_SOT23 | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | LOGO | RBD_Library:RBDLogo | G*** |
| 1 | STM32F107VCTx | Package_QFP:LQFP-100_14x14mm_P0.5mm | U1 |
| 1 | SW_Push | RBD_Library:KLS7-TS3401 | SW1 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J6 |
Questions
How big is the RbdPill F107 PCB?
It measures 67.9 × 52.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the RbdPill F107 use?
31 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RbdPill F107 KiCad files?
From the robodebil/OpenPill_byRBD repository on GitHub, at the commit this page was made from: the board is RbdPill_F107.kicad_pcb and its schematic RbdPill_F107.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the RbdPill F107 design in my own project?
Its repository states no licence, so its author keeps all rights: ask robodebil before reusing the design.
Similar boards
- 2 layers65 × 30 mm
Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
31 parts1kGPL-3.0 - 2 layers191 × 98.5 mm
MacroKeypad
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
31 parts915 - 2 layers39 × 45.2 mm
CH32V003F4P6-R0-1v1
openwch/ch32v003
CH32V003 is an ultra-cheap RISC-V MCU with 2KB SRAM, 16KB flash, and up to 18 GPIOs that sells for under $0.10
31 parts599 - 2 layers26.7 × 27.9 mm
Breakout board
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
31 parts546MIT - 2 layers100 × 50 mm
Pixelix
BlueAndi/Pixelix
Full RGB LED matrix, based on an ESP32 and WS2812B LEDs or emulated LEDs on TFT.
31 parts447MIT - 2 layers77.2 × 69.8 mm
- 2 layers103 × 55 mm
