Skip to the content
2 layers66 × 44 mmFgl g1, the printed circuit board in 3D
Size
66 × 44 mm
Copper layers
2
Thickness
1.6 mm
Parts
46
Nets
35
Pads
126
Tracks, vias
205, 71
Pours
3
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
30 Jul 2026
Updated
1 Nov 2026

Overview

Fgl g1 is an open-source printed circuit board by roblim, from the roblim/fused_glass_lighting repository on GitHub. It is a 2-layer board of 66 × 44 mm with 46 parts on 35 nets, routed with 205 tracks and 71 vias.

It is built around the CC0603KRX7R9BB104, CL21A106KAYNNNE and SS14, with the SWPA6045S470MT, 1206L075THYR and 25121WF330JT4E among its other parts. Its parts include 12 resistors, 9 capacitors, 5 connectors, 4 diodes and 3 ICs. It belongs with the ESP32 and RISC-V boards of this library.

Main components

12

Parts

46
QtyValueFootprintReferences
4100nCapacitor_SMD:C_0603_1608MetricC4, C5, C6, C9
410u 25VCapacitor_SMD:C_0805_2012MetricC1, C2, C3, C8
4M3MountingHole:MountingHole_3.2mm_M3H1, H2, H3, H4
3SS14Diode_SMD:D_SMAD2, D3, D4
20.33R 1%Resistor_SMD:R_1206_3216MetricR3, R4
2100kResistor_SMD:R_0603_1608MetricR7, R11
247uHInductor_SMD:L_Sunlord_SWPA6045SL1, L2
25.1k 1%Resistor_SMD:R_0603_1608MetricR1, R2
2AL8860WT-7Package_TO_SOT_SMD:TSOT-23-5U2, U3
1+3V3TestPoint:TestPoint_Pad_D1.5mmTP4
1+5VTestPoint:TestPoint_Pad_D1.5mmTP1
10.75A holdFuse:Fuse_1206_3216MetricF1
1100RResistor_SMD:R_0603_1608MetricR10
110k 1%Resistor_SMD:R_0603_1608MetricR9
11kResistor_SMD:R_0603_1608MetricR6
11uCapacitor_SMD:C_0603_1608MetricC7
12.2k 1%Resistor_SMD:R_0603_1608MetricR8
133R 1W 2512Resistor_SMD:R_2512_6332MetricR12
147k 1%Resistor_SMD:R_0603_1608MetricR5
1AO3400APackage_TO_SOT_SMD:SOT-23Q1
1DIM_CTRLTestPoint:TestPoint_Pad_D1.5mmTP3
1FILAMENT 1Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_HorizontalJ4
1FILAMENT 2Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_HorizontalJ5
1GNDTestPoint:TestPoint_Pad_D1.5mmTP2
1LD2410SConnector_JST:JST_PH_S5B-PH-K_1x05_P2.00mm_HorizontalJ3
1POT 100k linConnector_JST:JST_PH_S3B-PH-K_1x03_P2.00mm_HorizontalJ2
1RADAR_OT2TestPoint:TestPoint_Pad_D1.5mmTP5
1SMF6.0ADiode_SMD:D_SOD-123FD1
1USB-C (from bank)Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12J1
1XIAO ESP32C3fgl:XIAO_ESP32C3_CastellatedU1

Similar boards

  • 4 layers150 × 100 mmCm4-robo controller, the printed circuit board in 3D

    Cm4-robo controller

    jrseti/roboclaw-cm4-dc-dish-controller

    Satellite dish controller using a ROBOCLAW-2X15A-OEM controlled by a Raspberry Pi CM4 module. Powered by DC battery.

    292 partsMIT
  • 4 layers65 × 45 mmLora gps tracker rev a, the printed circuit board in 3D

    Lora gps tracker rev a

    bogdan-kovalchuk/esp32-lora-gps-tracker

    Encrypted point-to-point GPS telemetry over 433 MHz LoRa between two ESP32 boards.

    69 partsMIT
  • 2 layers90 × 70 mmMidi s3 mini, the printed circuit board in 3D

    Midi s3 mini

    usr-ein/TriMixxx

    Open source standalone DJ multimedia player, compatible with Rekordbox

    102 parts44GPL-3.0
  • 4 layers100 × 100 mmAmod m, the printed circuit board in 3D

    Amod m

    gallicchio/AMOD-and-RFMOD

    The tutorial's 2x12 adapter (/mudd/133electronics/icepi-zero-dac-adc/adapterboard/) with a 2 x 6 right-angle Pmod socket on a 15 mm extension of its right-hand end, so an Icepi Zero can drive AMOD-A's and RF-MOD's Pmod…

    207 parts
  • 4 layers60 × 120 mmTheoros, the printed circuit board in 3D

    Theoros

    Majorwhiskey/gps-lora

    Theoros is a USB-C GPS logger and LoRa tracker built on the ESP32-S3. It logs 1 Hz u-blox M10 fixes to microSD, shows status on an OLED and sends AES-128-CCM encrypted position over 868 MHz LoRa.

    88 partsCERN-OHL-P-2.0
  • 4 layers100 × 75 mmFreedo radio, the printed circuit board in 3D

    Freedo radio

    CappyT/freedo

    Local coordinator for tado V3+ heating devices, with a Home Assistant integration and add-on

    135 parts33Apache-2.0
  • 4 layers85 × 56 mmPiVI, the printed circuit board in 3D

    PiVI

    kuba2k2/PiVI

    A small Pi-sized single board computer for your car

    289 partsGPL-3.0
  • 4 layers98 × 74 mmHub standard, the printed circuit board in 3D

    Hub standard

    nathanfraske/CEC-Platform

    ONE board file, kept current by the wave (owner directive 2026-07-25: "the current best should be placed into a candidate folder per board and kept current with only one board ideally so we have a reference").

    91 partsApache-2.0

Questions

How big is the Fgl g1 PCB?

It measures 66 × 44 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Fgl g1 use?

46 parts, built around the CC0603KRX7R9BB104, CL21A106KAYNNNE, SS14 and SWPA6045S470MT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Fgl g1 KiCad files?

From the roblim/fused_glass_lighting repository on GitHub, at the commit this page was made from: the board is hardware/kicad/fgl_g1/fgl_g1.kicad_pcb and its schematic hardware/kicad/fgl_g1/fgl_g1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Fgl g1 design in my own project?

Its repository states no licence, so its author keeps all rights: ask roblim before reusing the design.