Skip to the content
2 layers17 × 16 mmMini usb radio interface, the printed circuit board in 3D

A small CM108 USB radio interface providing audio, PTT and Squelch lines. PCB fits into a 9 pin D-Sub connector.

Size
17 × 16 mm
Copper layers
2
Thickness
1.6 mm
Parts
22
Nets
45
Pads
96
Tracks, vias
135, 38
Pours
2
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
9 Apr 2020
Updated
1 May 2024

Overview

Mini usb radio interface is an open-source printed circuit board by robinolejnik, from the robinolejnik/mini-usb-radio-interface repository on GitHub, published under the MIT licence. It is a 2-layer board of 17 × 16 mm with 22 parts on 45 nets, routed with 135 tracks and 38 vias.

It is built around the CM108AH and BSS138. Its parts include 9 capacitors, 5 connectors, 3 resistors, 1 IC and 1 diode. It belongs with the radio and wireless and interfaces and adapters boards of this library.

Main components

2

README

README.md

mini-usb-radio-interface

A small CM108 USB radio interface providing audio, PTT and Squelch lines. PCB fits into a 9 pin D-Sub connector.

View the interactive BOM

Parts

22
QtyValueFootprintReferences
34.7uCapacitor_SMD:C_0603_1608MetricC4, C6, C7
2100nCapacitor_SMD:C_0603_1608MetricC3, C5
21uCapacitor_SMD:C_0603_1608MetricC8, C9
220pCapacitor_SMD:C_0603_1608MetricC1, C2
222Resistor_SMD:R_0603_1608MetricR1, R3
11.5kResistor_SMD:R_0603_1608MetricR2
110uInductor_SMD:L_0805_2012MetricL1
112MCrystal:Crystal_SMD_3225-4Pin_3.2x2.5mmY1
1B5819W(BAT46W)Diode_SMD:D_SOD-123D1
1BSS138Package_TO_SOT_SMD:SOT-23Q1
1CM108AHPackage_QFP:LQFP-48_7x7mm_P0.5mmU1
1DB9_MaleConnector_Dsub:DSUB-9_Male_EdgeMount_P2.77mmJ5
1DMConnector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_VerticalJ3
1DPConnector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_VerticalJ2
1GNDConnector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_VerticalJ4
1VCCConnector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_VerticalJ1

Similar boards

  • 2 layers40.5 × 21 mmSingle sided radio interface, the printed circuit board in 3D

    Single sided radio interface

    tomwardill/cm108radiowidget

    A CM108 based widget for interacting with radios via software

    23 parts4MIT
  • 2 layers45 × 45 mmFiberaudio-108, the printed circuit board in 3D

    Fiberaudio-108

    islandcontroller/fiberaudio-108

    A low-cost USB audio interface with S/PDIF optical output, based on the Cmedia CM108 ASIC.

    43 parts29
  • 2 layers65 × 45 mmDB20G Interface, the printed circuit board in 3D

    DB20G Interface

    lernin2doit/DB20-G-APP

    Connect your Android phone to your DB20-G wirelessly over Bluetooth — program channels, manage repeaters, key PTT, and stream live audio, all from a beginner-friendly interface designed around real GMRS community…

    52 partsMIT
  • 2 layers76.3 × 27.2 mmM3D4, the printed circuit board in 3D

    M3D4

    mariosgit/M3D4

    Mega Mixer

    33 parts
  • 4 layers36 × 50.2 mmRacer, the printed circuit board in 3D

    Racer

    StuckAtPrototype/Racer

    These are structured into their own files. I could have used submodules, but decided against it.

    83 parts3.8kApache-2.0
  • 4 layers95 × 95 mmCube motherboard, the printed circuit board in 3D

    Cube motherboard

    willem-pennings/balancing-cube

    A cube that balances itself in a corner or edge using reaction wheels

    52 parts1.1kGPL-3.0
  • 2 layers54.6 × 70.9 mmBeagleLogic Cape, the printed circuit board in 3D

    BeagleLogic Cape

    abhishek-kakkar/BeagleLogic

    A Software Suite that implements a logic analyzer with the PRU on the BeagleBone / BeagleBone Black.

    22 parts479GPL-3.0
  • 2 layers44.2 × 29.3 mmI2c tiny usb, the printed circuit board in 3D

    I2c tiny usb

    harbaum/I2C-Tiny-USB

    Cheap and simple I²C to USB interface

    27 parts454

Questions

How big is the Mini usb radio interface PCB?

It measures 17 × 16 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Mini usb radio interface use?

22 parts, built around the CM108AH and BSS138. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Mini usb radio interface KiCad files?

From the robinolejnik/mini-usb-radio-interface repository on GitHub, at the commit this page was made from: the board is miniusbradiointerface.kicad_pcb and its schematic miniusbradiointerface.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Mini usb radio interface design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).