
Mini usb radio interface
robinolejnik/mini-usb-radio-interface
A small CM108 USB radio interface providing audio, PTT and Squelch lines. PCB fits into a 9 pin D-Sub connector.

A CM108 based widget for interacting with radios via software
Single sided radio interface is an open-source printed circuit board by tomwardill, from the tomwardill/cm108radiowidget repository on GitHub, published under the MIT licence. It is a 2-layer board of 40.5 × 21 mm with 23 parts on 21 nets, routed with 153 tracks and 20 vias.
It is built around the CM108AH and BSS138. Its parts include 9 capacitors, 6 connectors, 3 resistors, 1 IC and 1 diode. It belongs with the radio and wireless and interfaces and adapters boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 4.7u | Capacitor_SMD:C_0603_1608Metric | C4, C6, C7 |
| 2 | 100n | Capacitor_SMD:C_0603_1608Metric | C3, C5 |
| 2 | 1u | Capacitor_SMD:C_0603_1608Metric | C8, C9 |
| 2 | 20p | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 2 | 22 | Resistor_SMD:R_0603_1608Metric | R1, R3 |
| 1 | 1.5k | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 10u | Inductor_SMD:L_0805_2012Metric | L1 |
| 1 | 12M | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | AUDIO_IN | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J7 |
| 1 | AUDIO_OUT | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J6 |
| 1 | B5819W(BAT46W) | Diode_SMD:D_SOD-123 | D1 |
| 1 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | CM108AH | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | GND | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J9 |
| 1 | PTT | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J5 |
| 1 | SQUELCH | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J8 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Amphenol_10103594-0001LF_Horizontal | J10 |

robinolejnik/mini-usb-radio-interface
A small CM108 USB radio interface providing audio, PTT and Squelch lines. PCB fits into a 9 pin D-Sub connector.

islandcontroller/fiberaudio-108
A low-cost USB audio interface with S/PDIF optical output, based on the Cmedia CM108 ASIC.

lernin2doit/DB20-G-APP
Connect your Android phone to your DB20-G wirelessly over Bluetooth — program channels, manage repeaters, key PTT, and stream live audio, all from a beginner-friendly interface designed around real GMRS community…


StuckAtPrototype/Racer
These are structured into their own files. I could have used submodules, but decided against it.

willem-pennings/balancing-cube
A cube that balances itself in a corner or edge using reaction wheels

abhishek-kakkar/BeagleLogic
A Software Suite that implements a logic analyzer with the PRU on the BeagleBone / BeagleBone Black.

It measures 40.5 × 21 mm and has 2 copper layers, 1.6 mm thick.
23 parts, built around the CM108AH and BSS138. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the tomwardill/cm108radiowidget repository on GitHub, at the commit this page was made from: the board is single-sided-radio-interface.kicad_pcb and its schematic single-sided-radio-interface.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).