Skip to the content
2 layers24 × 33.2 mm16mm JST ZH 1.5, the printed circuit board in 3D

16mm JST ZH 1.5

robhaswell/RC-PCBs

Suggested uses: 16mm flight controller in a Blade 150 S or 180 CFX. Includes headers for a floating Happymodel EP1 or EP2.

Size
24 × 33.2 mm
Copper layers
2
Thickness
1.6 mm
Parts
17
Nets
7
Pads
34
Tracks, vias
11, 1
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
26 Oct 2021
Updated
2 May 2023

Overview

16mm JST ZH 1.5 is an open-source printed circuit board by robhaswell, from the robhaswell/RC-PCBs repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 24 × 33.2 mm with 17 parts on 7 nets, routed with 11 tracks and 1 via.

README

Bottom foots/16mm PicoBlade 1.25/README.md

16mm FC, JST-ZH 1.5mm connectors, Happymodel EP RX

Suggested uses: 16mm flight controller in a Blade 150 S or 180 CFX. Includes headers for a floating Happymodel EP1 or EP2.

Image of board

Parts

17
QtyValueFootprintReferences
7Conn_01x01Connector_Wire:SolderWire-0.1sqmm_1x01_D0.4mm_OD1mmJ6, J7, J8, J9, J10, J12, J13
4MountingHoleMountingHole:MountingHole_2.2mm_M2H1, H2, H3, H4
3Conn_01x03RC-PCBs:JST_ZH_B3B-ZR_1x03_P1.50mm_VerticalJ2, J3, J4
2Conn_01x03Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ5, J11
1Conn_01x06Connector_JST:JST_SHL_SM06B-SHLS-TF_1x06-1MP_P1.00mm_HorizontalJ1

More from robhaswell/RC-PCBs

11
  • 2 layers63.5 × 54.6 mmHalogen discharger, the printed circuit board in 3D

    Halogen discharger

    robhaswell/RC-PCBs

    Suggested uses: 16mm flight controller in a Blade 150 S or 180 CFX. Includes headers for a floating Happymodel EP1 or EP2.

    23 partsApache-2.0
  • 2 layers82.6 × 38.1 mm1S parallel board, the printed circuit board in 3D

    1S parallel board

    robhaswell/RC-PCBs

    Suggested uses: 16mm flight controller in a Blade 150 S or 180 CFX. Includes headers for a floating Happymodel EP1 or EP2.

    20 partsApache-2.0
  • 2 layers24 × 34.1 mm16mm Dupont, the printed circuit board in 3D

    16mm Dupont

    robhaswell/RC-PCBs

    Suggested uses: 16mm flight controller in a Blade 150 S or 180 CFX. Includes headers for a floating Happymodel EP1 or EP2.

    19 partsApache-2.0
  • 2 layers20 × 20 mm16mm Blade, the printed circuit board in 3D

    16mm Blade

    robhaswell/RC-PCBs

    Suggested uses: 16mm flight controller in a Blade 150 S or 180 CFX. Includes headers for a floating Happymodel EP1 or EP2.

    18 partsApache-2.0
  • 2 layers97.8 × 40.6 mm4S parallel board, the printed circuit board in 3D

    4S parallel board

    robhaswell/RC-PCBs

    Suggested uses: 16mm flight controller in a Blade 150 S or 180 CFX. Includes headers for a floating Happymodel EP1 or EP2.

    14 partsApache-2.0
  • 2 layers100.3 × 49.5 mm6S parallel board, the printed circuit board in 3D

    6S parallel board

    robhaswell/RC-PCBs

    Suggested uses: 16mm flight controller in a Blade 150 S or 180 CFX. Includes headers for a floating Happymodel EP1 or EP2.

    14 partsApache-2.0
  • 2 layers24 × 30.4 mm16mm PicoBlade 1.25, the printed circuit board in 3D

    16mm PicoBlade 1.25

    robhaswell/RC-PCBs

    Suggested uses: 16mm flight controller in a Blade 150 S or 180 CFX. Includes headers for a floating Happymodel EP1 or EP2.

    14 partsApache-2.0
  • 2 layers57.1 × 33 mmBT2.0-parallel board, the printed circuit board in 3D

    BT2.0-parallel board

    robhaswell/RC-PCBs

    Suggested uses: 16mm flight controller in a Blade 150 S or 180 CFX. Includes headers for a floating Happymodel EP1 or EP2.

    11 partsApache-2.0
  • 2 layers82.6 × 38.1 mm2S parallel board, the printed circuit board in 3D

    2S parallel board

    robhaswell/RC-PCBs

    Suggested uses: 16mm flight controller in a Blade 150 S or 180 CFX. Includes headers for a floating Happymodel EP1 or EP2.

    10 partsApache-2.0
  • 2 layers83.8 × 38.1 mm3S parallel board, the printed circuit board in 3D

    3S parallel board

    robhaswell/RC-PCBs

    Suggested uses: 16mm flight controller in a Blade 150 S or 180 CFX. Includes headers for a floating Happymodel EP1 or EP2.

    10 partsApache-2.0
  • 2 layers68.5 × 20.3 mm4S parallel board, the printed circuit board in 3D

    4S parallel board

    robhaswell/RC-PCBs

    Suggested uses: 16mm flight controller in a Blade 150 S or 180 CFX. Includes headers for a floating Happymodel EP1 or EP2.

    6 partsApache-2.0

Similar boards

  • 2 layers50 × 35 mmServo power, the printed circuit board in 3D

    Servo power

    earthtojake/text-to-cad

    Design physical products with AI

    17 parts26kMIT
  • 2 layers139.7 × 62.2 mmBreakout 60pin EEC IV, the printed circuit board in 3D

    Breakout 60pin EEC IV

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    17 parts1.2k
  • 2 layers29.2 × 55.9 mmDeniseadapter, the printed circuit board in 3D

    Deniseadapter

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    17 parts1kGPL-3.0
  • 2 layers24.5 × 36.5 mmCluster, the printed circuit board in 3D

    Cluster

    JesusFreke/lalboard

    A 3D-printed keyboard inspired by the DataHand

    17 parts993
  • 2 layers56.3 × 55.7 mmStarNecklace, the printed circuit board in 3D

    StarNecklace

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    17 parts915
  • 2 layers25 × 25 mmSmallEncoder, the printed circuit board in 3D

    SmallEncoder

    DDeGonge/OS-ARM

    This arm is not industrial and it will not be fast, but that is not my goal. But it will hopefully be a very nice looking arm fully capable of 6dof motion, cheap enough to keep it accessable but capable enough to…

    17 parts498MIT
  • 2 layers38.9 × 16.1 mmAmoeba spc, the printed circuit board in 3D

    Amoeba spc

    mtl/keyboard-pcbs

    Keyboard PCBs

    17 parts485
  • 2 layers36 × 51 mmABSIS ALE, the printed circuit board in 3D

    ABSIS ALE

    jrsteensen/OpenHornet

    OpenHornet 1:1 F/A-18C Simulator Repository

    17 parts431

Questions

How big is the 16mm JST ZH 1.5 PCB?

It measures 24 × 33.2 mm and has 2 copper layers, 1.6 mm thick.

What parts does the 16mm JST ZH 1.5 use?

17 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the 16mm JST ZH 1.5 KiCad files?

From the robhaswell/RC-PCBs repository on GitHub, at the commit this page was made from: the board is Bottom foots/16mm JST ZH 1.5/board.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the 16mm JST ZH 1.5 design in my own project?

Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).