2 layers82.6 × 38.1 mm
1S parallel board
robhaswell/RC-PCBs
Suggested uses: 16mm flight controller in a Blade 150 S or 180 CFX. Includes headers for a floating Happymodel EP1 or EP2.
20 partsApache-2.0
2 layers63.5 × 54.6 mm
Halogen discharger
robhaswell/RC-PCBsSuggested uses: 16mm flight controller in a Blade 150 S or 180 CFX. Includes headers for a floating Happymodel EP1 or EP2.
- Size
- 63.5 × 54.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 23
- Nets
- 5
- Pads
- 38
- Tracks, vias
- 43, 2
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 26 Oct 2021
- Updated
- 2 May 2023
Overview
Halogen discharger is an open-source printed circuit board by robhaswell, from the robhaswell/RC-PCBs repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 63.5 × 54.6 mm with 23 parts on 5 nets, routed with 43 tracks and 2 vias.
README
Bottom foots/16mm PicoBlade 1.25/README.md16mm FC, JST-ZH 1.5mm connectors, Happymodel EP RX
Suggested uses: 16mm flight controller in a Blade 150 S or 180 CFX. Includes headers for a floating Happymodel EP1 or EP2.
Parts
23| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | Lamp | Library:GY6.35 | LA1, LA2, LA3, LA4, LA5, LA6, LA7, LA8, LA9, LA10, LA11, LA12 |
| 4 | Conn_01x01 | Connector_Wire:SolderWirePad_1x01_SMD_1x2mm | J2, J3, J4, J5 |
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3, H4 |
| 1 | Conn_01x02 | Connector_AMASS:AMASS_XT30PW-F_1x02_P2.50mm_Horizontal | J1 |
The 21 most common of 23 parts.
More from robhaswell/RC-PCBs
11- 2 layers24 × 34.1 mm
16mm Dupont
robhaswell/RC-PCBs
Suggested uses: 16mm flight controller in a Blade 150 S or 180 CFX. Includes headers for a floating Happymodel EP1 or EP2.
19 partsApache-2.0 - 2 layers20 × 20 mm
16mm Blade
robhaswell/RC-PCBs
Suggested uses: 16mm flight controller in a Blade 150 S or 180 CFX. Includes headers for a floating Happymodel EP1 or EP2.
18 partsApache-2.0 - 2 layers24 × 33.2 mm
16mm JST ZH 1.5
robhaswell/RC-PCBs
Suggested uses: 16mm flight controller in a Blade 150 S or 180 CFX. Includes headers for a floating Happymodel EP1 or EP2.
17 partsApache-2.0 - 2 layers97.8 × 40.6 mm
4S parallel board
robhaswell/RC-PCBs
Suggested uses: 16mm flight controller in a Blade 150 S or 180 CFX. Includes headers for a floating Happymodel EP1 or EP2.
14 partsApache-2.0 - 2 layers100.3 × 49.5 mm
6S parallel board
robhaswell/RC-PCBs
Suggested uses: 16mm flight controller in a Blade 150 S or 180 CFX. Includes headers for a floating Happymodel EP1 or EP2.
14 partsApache-2.0 - 2 layers24 × 30.4 mm
16mm PicoBlade 1.25
robhaswell/RC-PCBs
Suggested uses: 16mm flight controller in a Blade 150 S or 180 CFX. Includes headers for a floating Happymodel EP1 or EP2.
14 partsApache-2.0 - 2 layers57.1 × 33 mm
BT2.0-parallel board
robhaswell/RC-PCBs
Suggested uses: 16mm flight controller in a Blade 150 S or 180 CFX. Includes headers for a floating Happymodel EP1 or EP2.
11 partsApache-2.0 - 2 layers82.6 × 38.1 mm
2S parallel board
robhaswell/RC-PCBs
Suggested uses: 16mm flight controller in a Blade 150 S or 180 CFX. Includes headers for a floating Happymodel EP1 or EP2.
10 partsApache-2.0 - 2 layers83.8 × 38.1 mm
3S parallel board
robhaswell/RC-PCBs
Suggested uses: 16mm flight controller in a Blade 150 S or 180 CFX. Includes headers for a floating Happymodel EP1 or EP2.
10 partsApache-2.0 - 2 layers68.5 × 20.3 mm
/4S%20parallel%20board.kicad_pcb.jpg?size=s&soon)
4S parallel board
robhaswell/RC-PCBs
Suggested uses: 16mm flight controller in a Blade 150 S or 180 CFX. Includes headers for a floating Happymodel EP1 or EP2.
6 partsApache-2.0
Similar boards
- 2 layers65 × 56 mm
- 2 layers14 × 100 mm
Yunomi
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
23 parts3kApache-2.0 - 2 layers50.8 × 52.2 mm
- 2 layers138.8 × 89.8 mm
- 2 layers32.9 × 53.3 mm
- 2 layers35.5 × 50 mm
- 2 layers19 × 19 mm
- 2 layers88.5 × 28 mm
ExpBreakout
Duet3D/Duet-2-Hardware
The KiCAD source for the Duet 3d printer controller see www.duet3d.com
23 parts258
Questions
How big is the Halogen discharger PCB?
It measures 63.5 × 54.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Halogen discharger use?
23 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Halogen discharger KiCad files?
From the robhaswell/RC-PCBs repository on GitHub, at the commit this page was made from: the board is Halogen discharger/Halogen discharger.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Halogen discharger design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).