Skip to the content
2 layers68.5 × 20.3 mm4S parallel board, the printed circuit board in 3D

4S parallel board

robhaswell/RC-PCBs

Suggested uses: 16mm flight controller in a Blade 150 S or 180 CFX. Includes headers for a floating Happymodel EP1 or EP2.

Size
68.5 × 20.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
6
Nets
5
Pads
27
Tracks, vias
6, 0
Pours
4
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
26 Oct 2021
Updated
2 May 2023

Overview

4S parallel board is an open-source printed circuit board by robhaswell, from the robhaswell/RC-PCBs repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 68.5 × 20.3 mm with 6 parts on 5 nets, routed with 6 tracks and 0 vias.

README

Bottom foots/16mm PicoBlade 1.25/README.md

16mm FC, JST-ZH 1.5mm connectors, Happymodel EP RX

Suggested uses: 16mm flight controller in a Blade 150 S or 180 CFX. Includes headers for a floating Happymodel EP1 or EP2.

Image of board

Parts

6
QtyValueFootprintReferences
4Conn_01x05Connector_JST:JST_XH_B5B-XH-A_1x05_P2.50mm_VerticalJ2, J3, J9, J12
1Conn_01x02Connector_Wire:SolderWire-1.5sqmm_1x02_P6mm_D1.7mm_OD3mmJ1
1Conn_01x05Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_VerticalJ6

More from robhaswell/RC-PCBs

11
  • 2 layers63.5 × 54.6 mmHalogen discharger, the printed circuit board in 3D

    Halogen discharger

    robhaswell/RC-PCBs

    Suggested uses: 16mm flight controller in a Blade 150 S or 180 CFX. Includes headers for a floating Happymodel EP1 or EP2.

    23 partsApache-2.0
  • 2 layers82.6 × 38.1 mm1S parallel board, the printed circuit board in 3D

    1S parallel board

    robhaswell/RC-PCBs

    Suggested uses: 16mm flight controller in a Blade 150 S or 180 CFX. Includes headers for a floating Happymodel EP1 or EP2.

    20 partsApache-2.0
  • 2 layers24 × 34.1 mm16mm Dupont, the printed circuit board in 3D

    16mm Dupont

    robhaswell/RC-PCBs

    Suggested uses: 16mm flight controller in a Blade 150 S or 180 CFX. Includes headers for a floating Happymodel EP1 or EP2.

    19 partsApache-2.0
  • 2 layers20 × 20 mm16mm Blade, the printed circuit board in 3D

    16mm Blade

    robhaswell/RC-PCBs

    Suggested uses: 16mm flight controller in a Blade 150 S or 180 CFX. Includes headers for a floating Happymodel EP1 or EP2.

    18 partsApache-2.0
  • 2 layers24 × 33.2 mm16mm JST ZH 1.5, the printed circuit board in 3D

    16mm JST ZH 1.5

    robhaswell/RC-PCBs

    Suggested uses: 16mm flight controller in a Blade 150 S or 180 CFX. Includes headers for a floating Happymodel EP1 or EP2.

    17 partsApache-2.0
  • 2 layers97.8 × 40.6 mm4S parallel board, the printed circuit board in 3D

    4S parallel board

    robhaswell/RC-PCBs

    Suggested uses: 16mm flight controller in a Blade 150 S or 180 CFX. Includes headers for a floating Happymodel EP1 or EP2.

    14 partsApache-2.0
  • 2 layers100.3 × 49.5 mm6S parallel board, the printed circuit board in 3D

    6S parallel board

    robhaswell/RC-PCBs

    Suggested uses: 16mm flight controller in a Blade 150 S or 180 CFX. Includes headers for a floating Happymodel EP1 or EP2.

    14 partsApache-2.0
  • 2 layers24 × 30.4 mm16mm PicoBlade 1.25, the printed circuit board in 3D

    16mm PicoBlade 1.25

    robhaswell/RC-PCBs

    Suggested uses: 16mm flight controller in a Blade 150 S or 180 CFX. Includes headers for a floating Happymodel EP1 or EP2.

    14 partsApache-2.0
  • 2 layers57.1 × 33 mmBT2.0-parallel board, the printed circuit board in 3D

    BT2.0-parallel board

    robhaswell/RC-PCBs

    Suggested uses: 16mm flight controller in a Blade 150 S or 180 CFX. Includes headers for a floating Happymodel EP1 or EP2.

    11 partsApache-2.0
  • 2 layers82.6 × 38.1 mm2S parallel board, the printed circuit board in 3D

    2S parallel board

    robhaswell/RC-PCBs

    Suggested uses: 16mm flight controller in a Blade 150 S or 180 CFX. Includes headers for a floating Happymodel EP1 or EP2.

    10 partsApache-2.0
  • 2 layers83.8 × 38.1 mm3S parallel board, the printed circuit board in 3D

    3S parallel board

    robhaswell/RC-PCBs

    Suggested uses: 16mm flight controller in a Blade 150 S or 180 CFX. Includes headers for a floating Happymodel EP1 or EP2.

    10 partsApache-2.0

Similar boards

  • 2 layers18.5 × 11.1 mmSwitch, the printed circuit board in 3D

    Switch

    byrantech/laptop

    anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

    6 parts4.3kMIT
  • 2 layers14.6 × 33 mmBrain board SD Card 1, the printed circuit board in 3D

    Brain board SD Card 1

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    6 parts1.2k
  • 2 layers9 × 9 mmDpoint, the printed circuit board in 3D

    Dpoint

    Jcparkyn/dpoint

    Open-source digital stylus using camera tracking and inertial measurements

    6 parts1.1kMIT
  • 2 layers51.5 × 16.6 mmMicroswitchXY Endstop, the printed circuit board in 3D

    MicroswitchXY Endstop

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    6 parts1.1kGPL-3.0
  • 2 layers21.9 × 76.7 mmAmiga External, the printed circuit board in 3D

    Amiga External

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    6 parts1kGPL-3.0
  • 2 layers88.9 × 50.8 mmBusinesscard, the printed circuit board in 3D

    Businesscard

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    6 parts915
  • 2 layers20.3 × 15.2 mmL0 RGB led, the printed circuit board in 3D

    L0 RGB led

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    6 parts546MIT
  • 2 layers9 × 3.6 mmOpticalEncoder, the printed circuit board in 3D

    OpticalEncoder

    adamb314/ServoProject

    Getting the most out of your hobby servo

    6 parts545

Questions

How big is the 4S parallel board PCB?

It measures 68.5 × 20.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the 4S parallel board use?

6 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the 4S parallel board KiCad files?

From the robhaswell/RC-PCBs repository on GitHub, at the commit this page was made from: the board is 4S parallel board (compact)/4S parallel board.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the 4S parallel board design in my own project?

Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).