
Tamagotchi
TaniWanKenobi/tamagotchi
A custom PCB-based Tamagotchi virtual pet built with the XIAO-ESP32-C6!

my second project for fallout
Luna is an open-source printed circuit board by robertshepherdcpp, from the robertshepherdcpp/tamagotchi repository on GitHub. It is a 2-layer board of 81 × 98 mm with 8 parts on 14 nets, routed with 135 tracks and 20 vias.
It is built around the HS96L03W2C03 and 1207-P6.5MM. Its parts include 5 switches and 2 ICs. It belongs with the ESP32 and RISC-V boards of this library.
luna-tamagotchi my second project for fallout
what the project is:
why i chose to make with project (the inspiration/motivation):
how to use my project
download the arduino IDE, install all the relevant libraries: Adafruit SSD1306 (by Adafruit), Adafruit GFX Library (by Adafruit). then
load up the xiao-esp32-c6 board. plug the project into your computer via usb, and press port on the arduino guide. as this project doesnt have a battery built
in, in order for this project to work it has to have a usb connected to it at all times.
for more help you can refer to these two guides:
https://fallout.hackclub.com/docs/guided-projects/tamagotchi-firmware
https://wiki.seeedstudio.com/xiao_esp32c6_getting_started/how the project works
nap [SJ], feed luosifen [LSF], climb a mountain [CLMB], wildcard [WLDCRD].how to use it?
here are some images of the project:
estimated costs (via uploading gerber files to jlcpcb):
link
my zine:
The BOM (available in BOM.csv in this github repo):
aliexpress link
Total Cost: $27.44
the whole building process was documented on my youtube channel here
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | SW_Push | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KSC6xxG | SW1, SW2, SW3, SW4 |
| 1 | 1207-P6.5MM | easyeda2kicad:BUZ-TH_BD12.5-P6.50-D1.4 | BUZZER1 |
| 1 | HS96L03W2C03 | easyeda2kicad:OLED-TH_L27.8-W27.2-P2.54_C9900033791 | U2 |
| 1 | RotaryEncoder | Rotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW5 |
| 1 | XIAO-ESP32-C6-DIP | Seeed Studio XIAO Series Library:XIAO-ESP32-C6-DIP | U1 |

TaniWanKenobi/tamagotchi
A custom PCB-based Tamagotchi virtual pet built with the XIAO-ESP32-C6!



shelxty/lego-tamagotchi
Simple tamagotchi with OLED display screen, buzzer, and 3 buttons custom-made in KiCad, with parts assembled in OnShape.

alex-technologia/Realistic-tamagochi
A tamagochi but much more realistically accurate

Ayush09S/Tamagotchi
A small digital pet as a physical device remake! It features an LDR that can detect light changes, four buttons, and a buzzer. It also has an OLED display!


hiralsinghal/Tamagotchi
This is a Tamagotchi. It is a small handheld video game in which you have a pet. You can play with it, feed it and more depending on your firmware code.
It measures 81 × 98 mm and has 2 copper layers, 1.6 mm thick.
8 parts, built around the HS96L03W2C03 and 1207-P6.5MM. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the robertshepherdcpp/tamagotchi repository on GitHub, at the commit this page was made from: the board is PCB/luna.kicad_pcb and its schematic PCB/luna.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask robertshepherdcpp before reusing the design.