
Tamagotchi
TaniWanKenobi/tamagotchi
A custom PCB-based Tamagotchi virtual pet built with the XIAO-ESP32-C6!

This is a Tamagotchi. It is a small handheld video game in which you have a pet. You can play with it, feed it and more depending on your firmware code.
Tamagotchi is an open-source printed circuit board by hiralsinghal, from the hiralsinghal/Tamagotchi repository on GitHub, published under the MIT licence. It is a 2-layer board of 74.8 × 74.1 mm with 10 parts on 19 nets, routed with 86 tracks and 9 vias.
It is built around the HS96L03W2C03 and 1207-P6.5MM. Its parts include 4 switches and 2 ICs. It belongs with the ESP32 and RISC-V boards of this library.
This is a Tamagotchi. It is a small handheld video game in which you have a pet. You can play with it, feed it and more depending on your firmware code.
You can always customise the firmware to make it do what you want!
Here's the schematic for the Tamagotchi. It has XIAO-ESP32-C3-SMD as its MCU. It has an OLED display, a buzzer, 4 switches and a battery cell.

Its a pentagon shaped PCB, which has stars on it silkscreen.

I made the case using Fusion. It has stars on the top case (goes with the PCB).
The source file is in the folder CAD.

Here you can find the BOM!


I made it for Fallout. Making this improved my electronics skills. I now know that I should read datasheets to understand how a pin on a component works. Because of this, I had to work on CAD which are now a lot better than before.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | SW_Push | oled:SW-TH_4P-L4.5-W4.5-P3.00-LS4.8 | SW1, SW2, SW3, SW4 |
| 1 | 1207-P6.5MM | oled:BUZ-TH_BD12.5-P6.50-D1.4 | BUZZER1 |
| 1 | Battery_Cell | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | BT1 |
| 1 | HS96L03W2C03 | oled:OLED-TH_L27.8-W27.2-P2.54_C9900033791 | U2 |
| 1 | XIAO-ESP32-C3-SMD | esp32:XIAO-ESP32-C3-DIP-SMD | U1 |
The 8 most common of 10 parts.

TaniWanKenobi/tamagotchi
A custom PCB-based Tamagotchi virtual pet built with the XIAO-ESP32-C6!



shelxty/lego-tamagotchi
Simple tamagotchi with OLED display screen, buzzer, and 3 buttons custom-made in KiCad, with parts assembled in OnShape.

alex-technologia/Realistic-tamagochi
A tamagochi but much more realistically accurate

Ayush09S/Tamagotchi
A small digital pet as a physical device remake! It features an LDR that can detect light changes, four buttons, and a buzzer. It also has an OLED display!


It measures 74.8 × 74.1 mm and has 2 copper layers, 1.6 mm thick.
10 parts, built around the HS96L03W2C03 and 1207-P6.5MM. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the hiralsinghal/Tamagotchi repository on GitHub, at the commit this page was made from: the board is PCB/Tamagotchi.kicad_pcb and its schematic PCB/Tamagotchi.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).